Professional Documents
Culture Documents
Specification
Specification
Date: 2022.07.18
19:01:34 IST
Reason: IREPS
Document
Location: IREPS-CRIS
2. Water Resistance Resistance to water penetration ( minimum As per IS: 7016 (Part-VII) 1986 or
90 cm water head) latest.
3. Seam Joints and All seams and joint should be tapped from As per relevant specification
sealing inside with heat seal
4. Mass of Raincoat Minimum 245g/m2 (Upper Fabric 55-65 As per IS: 7016 (Part-I) 1982 or latest.
fabric (GSM) g/m2 & Remainder PVC Coating)
5. Shirt pocket 02 Nos. of pockets of 6X6 inches size with As per relevant specification
(tolerance +/- 1 inch) flap on front side of jacket (ensuring proper
water proof ness of jacket) at the waist level
i.e. lower side of jacket as per sketch
enclosed.
6. Sleeve Baggies style As per relevant specification
7. Zipper Shirt Polymeric rust proof Matching color with YKK or reputed brand
Auto lock slider puller
8. Zipper Cover Extra cover on zipper with matching color As per relevant specification
Snap Fastener-Shirt 4 numbers on zipper cover of matching As per relevant specification
9. color rust proof with IR marking, also one
button on paint bottom on each side to tight.
10. Wrist Wrist adjustable with elastic with relevant As per relevant specification
matching color.
11 Hood Adjustable Tying Cord Matching color (with As per relevant specification
metal/plastic bell or tip to close end).
12. Trouser (Pant) Waist Full Round Elastic type, 2 inch wide +/- As per relevant specification
Adjustable half inch.
13. Breaking Strength in Wrap – 55+/- 10 Kg Force As per IS: 7016 (Part-II) 1981 or latest.
kg/5 cm,Min Weft – 45 +/- 10 Kg Force
longitudinal and
Transverse direction
14. Tear Strength in in Wrap – 1.5 Kg Force Min As per IS: 7016 (Part-III) 1981 or latest.
kg/5 cm,Min Weft – 1.5 Kg Force Min
longitudinal and
Transverse direction
15. Reflective tape (50 Reflective Tape as per IS 15809:2017 or At the time of supply bidder should
mm) 2 inch width as latest. provide necessary lab test certification
per drg. Indian logo Washing cycle: 80 Wash Minimum (Test from NITRA, BITRA, SITRA , WRA
and NWR on left method IS: 15809:2017 ) or any NABL approved lab for
front side (on Dry clean cycle: 25 Dry clean Minimum genuineness use of reflective tape along
chest)of the jacket.. (Test method IS: 15809:2017 ) with confirmation letter from
Reflective Tape backing Material: 65 manufacturer..
polyester (+/-3 unit), 35 cotton. (+/-3 unit)
16. Color of rain coat Fluorescent orange color shade high As per IS 15809: 2017 Type 2
Visibility type-2,class-3
17. Packing cover The packing cover of each rain-coat should As per relevant specification
be in the form of pouch with Zip &
Sticker/printing of size on it.
18. Label All rain coat should be labeled with As per relevant specification
. Brand/Manufacture name, Size ,
.Wash care label,
.Manufacturing month and year
19. Marking Manufacturer logo/water mark required to As per relevant specification
emboss on running meter of reflective tape
and back raincoat fabric.
20. Finishing The Raincoat should be free from any
manufacturing defects such as cuts, loose
thread, spot, Weaving & stitching defect
etc. it must be properly hemmed at edges.
21. Printing & Marking Railway logo or department name as per EN: 13356:2001 Type 3.
buyers/ consignee is required to provide on
the front left side of chest and back of jacket
on a micro prismatic reflective label as per
specification Number EN: 13356:2001 Type
3. Marking shall be printed on the back
surface of the Micro prismatic reflective
film. The film shall then be assembled with
PVC film backing and sealed on all 4 sides
with a minimum of 5 mm width using RF
welding to create labels. The Logo/Printing
matter will be given by the consignee at the
time of sample approval.
22. Sample Firm need to submit 3 samples to consignee Sample
for advance approval for feel, finish, shade
and general appearance before production.
Heat ageing, mass 5 As per IS: 7016 (Part-VIII) 1986
23. loss
of coating % Max or latest.
24. Blocking Separation without damage to coating As per IS: 7016 (Part-IX) 1986
or latest
25. Cold cracks -5 As per IS: 7016 (Part-X) 1986
in’C,Max
or latest
26. Fusion No cracking or disintegration of face IS : 3322 ( Part 1 ) – 1987 or latest
coating separation without damage to
coating
27. Color fastness to Coating shall not stain IS : 3322 ( Part 1 ) – 1987 APPENDIX
rubbing, Min -C
28. Color fastness to Four IS : 3322 ( Part 1 ) – 1987 APPENDIX
Light, Min –B
Cont.. Page 3
Page 3
Note:
Textile Committee/NITRA/SITRA/BITRA//WRA or NABL approved lab test report required
for above mentioned test as per relevant IS/ specification along with supply; (Test report should
be not old more than 6 months)
A Tender specific Authority letter required for dealer of Raincoat from manufacturer of Raincoat
is to be submitted along with bid failure to submit the same ,the offer shall be summarily rejected.
Size detail is attached as Annexure-A
Drawing of Raincoat attached as Annexure-B
Annexure-A
JACKET
TROUSER