Professional Documents
Culture Documents
Test 1 Networking
Test 1 Networking
● Selected:
● a. Flow control
● This answer is correct.
●
● b. Data Control
● c. Data Management
● d. Flow Management
1/1
Question 2
● a. Gateways
● Selected:
● b. Linux
● This answer is correct.
●
● c. Routers
● d. Firewalls
1/1
Question 3
What command is used to test if your local network card is configured correctly?
● a. TRACERT 192.168.8.200
● b. ROUTE 192.168.8.200 255.255.255.0
● Selected:
● c. PING 127.0.0.1
● This answer is correct.
●
● d. PING 192.168.8.200
1/1
Question 4
Which OSI layer provides name resolution to the network ID and establishes access
security?
● Selected:
● a. Application
● This answer is correct.
●
● b. Presentation
● c. Session
● d. Network
1/1
Question 5
● Selected:
● a. Attentuation
● This answer is correct.
●
● b. Cycles per second
● c. Bits per second
● d. None of the above
1/1
Question 6
Which of the following cables offers the most protection against eavesdropping?
● a. UTP
● Selected:
● b. Fiber optics
● This answer is correct.
●
● c. Coaxial
● d. STP
1/1
Question 7
● a. 32 bit
● b. . 64 bit
● Selected:
● c. 128 bit
● This answer is correct.
●
● d. 256 bit
1/1
Question 8
● a. to each other
● b. in a line
● Selected:
● c. to a hub
● This answer is correct.
●
● d. in a ring
1/1
Question 9
1/1
Question 10
Which of the following network topologies provides the greatest level of network
scalability and high bandwidth?
1/1
Question 11
What is the purpose of the Network Interface Card?
1/1
Question 12
● a. Application
● Selected:
● b. Presentation
● This answer is correct.
●
● c. Session
● d. Transport
1/1
Question 13
Which layer of the OSI model is responsible for syntax and semantics?
0/1
Question 14
● Selected:
● a. Fiber-optic cable is considerably faster, lighter, and more durable than
wire media
● This answer is incorrect.
●
● b. Fiber-optic cable is easier to work with and less expensive than coaxial
cable
● c. Fiber-optic cable is well suited to systems requiring transfers of large
volumes of data
● d. Fiber-optic cable has data transfer rates from 500 kilobits to several
billion bits per second
0/1
Question 15
1/1
Question 16
● a. FTP
● b. TCP
● c. UDP
● Selected:
● d. B & C
● This answer is correct.
●
1/1
Question 17
● a. 16-bits
● b. 32-bits
● Selected:
● c. 48-bits
● This answer is correct.
●
● d. 64-bits
1/1
Question 18
What is the subnetwork address for a host with the IP address 200.10.5.68/28?
● a. 200.10.5.56
● b. 200.10.5.32
● Selected:
● c. 200.10.5.64
● This answer is correct.
●
● d. 200.10.5.0
0/1
Question 19
1/1
Question 20
You have an interface on a router with the IP address of 192.168.192.10/29. What is the
broadcast address the hosts will use on this LAN?
● a. 192.168.192.15
● b. 192.168.192.31
● Selected:
● c. 192.168.192.63
● This answer is incorrect.
●
● d. 192.168.192.127
1/1
Question 22
● Selected:
● a. TCP
● This answer is correct.
●
● b. IP
● c. UDP
● d. All of the above
1/1
Question 23
0/1
Question 24
● a. 169.254.0.1 to 169.254.0.254
● b. 169.254.0.1 to 169.254.0.255
● c. 169.254.0.1 to 169.254.255.254
● Selected:
● d. 169.254.0.1 to 169.254.255.255
● This answer is incorrect.
●
1/1
Question 25
Which of the following are BOTH true about the OSI model?
● a. The transportation layer serves the session layer; the data link layer
serves the transport layer
● b. The session layer serves the application layer; the physical layer serves
the data link layer
● c. The physical layer serves the data link layer; the application layer serves
the presentation layer
● Selected:
● d. The transport layer serves the session layer; the network layer serves the
transport layer
● This answer is correct.
●
0/1
Question 26
A small business has five hundred computers, across several departments. The
company employed a network administrator to address a problem in their network
environment. Users are complaining of seeing messages of IP conflict on their
computers. As a result, the network gets slow and stops responding. What is the
best approach that the network administrator can adopt in order to address the
problem?
● a. Replace all the hubs in the network with switches, hence increasing the
network speed
● b. Replace all the switches in the network with hubs, hence increasing the
network speed
● c. Implement a DHCP server to address the conflict issue
● Selected:
● d. Implement a DNS server to address the name resolution issues
● This answer is incorrect.
●
1/1
Question 27
1/1
Question 28
You need to configure a server that is on the subnet 192.168.19.24/29. The router has the
first available host address. Which of the following should you assign to the server?
.
● a. 192.168.19.0 255.255.255.0
● b. 192.168.19.33 255.255.255.240
● Selected:
● c. 192.168.19.26 255.255.255.248
● This answer is correct.
●
● d. 192.168.19.31 255.255.255.248
0/1
Question 29
1/1
Question 30
Assume that a bus topology network has ten(10) nodes. What would happen to the
network when the central coaxial cable is broken, between node nine(9) and node
ten(10):
0/1
Question 31
1/1
Question 32
● a. Presentation
● Selected:
● b. Application
● This answer is correct.
●
● c. Session
● d. None of the above
1/1
Question 33
● Selected:
● a. Bandwidth
● This answer is correct.
●
● b. Topology
● c. Bit speed
● d. Transmission ratio
1/1
Question 34
. Which of the following layer of OSI model also called end-to-end layer?
● a. Presentation layer
● b. Network layer
● c. Session layer
● Selected:
● d. Transport layer
● This answer is correct.
●
0/1
Question 35
If a host on a network has the address 172.16.45.14/30, what is the subnetwork this host
belongs to?
● Selected:
● a. 172.16.45.0
● This answer is incorrect.
●
● b. 172.16.45.4
● c. 172.16.45.8
● d. 172.16.45.12
1/1
Question 36
● Selected:
● a. when multiple computers send data at the same time
● This answer is correct.
●
● b. when multiple networks send data at the same time
● c. when one computer receives two messages at the same time
● d. when two different wires are attached on a network
1/1
Question 37
Which of the following network topology provides the greatest level of fault
tolerance:
● a. Hybrid
● b. FDDI ring
● Selected:
● c. Mesh
● This answer is correct.
●
● d. Tree Topology
1/1
Question 38
Which of the following topologies uses a single cable that is terminated at each end
to which all workstations are connected?
● a. Star
● b. Hybrid
● c. Ring
● Selected:
● d. Bus
● This answer is correct.
●
1/1
Question 39
1/1
Question 40
1/1
Question 41
Determining how packets are routed from source to destination is the concern of:
● Selected:
● a. Layer 3
● This answer is correct.
●
● b. Layer 1
● c. Layer 4
● d. Layer 2
0/1
Question 42
Which network connectivity device is best suited to connect two dissimilar networks,
which uses different techniques to transmit data? (for example, connecting an
Ethernet base network to a Token Ring network)
● a. Repeater
● b. Router
● Selected:
● c. Bridge
● This answer is incorrect.
●
● d. Gateway
0/1
Question 43
Managing dialog control between two computers on the network is concern of the:
● a. physical layer
● Selected:
● b. data link layer
● This answer is incorrect.
●
● c. session layer
● d. application layer
1/1
Question 44
● a. 16 bytes
● b. 10 bytes
● Selected:
● c. 20 bytes
● This answer is correct.
●
● d. 32 bytes
0/1
Question 45
You have a network with a subnet of 172.16.17.0/22. Which is the valid host address?
● a. 172.16.17.1 255.255.255.252
● b. 172.16.0.1 255.255.240.0
● Selected:
● c. 172.16.20.1 255.255.254.0
● This answer is incorrect.
●
● d. 172.16.18.255 255.255.252.0