Professional Documents
Culture Documents
for me , this is OK
I will make a nesting and let see from the report
its not supposed to be activated because you dont have a machine to cut these, but
the problem is it might affect
Ok?
Okk
We have another question about report's layout, can we modified the layout?
it depends , you can make your layout and send to me. but this is not free
I just need the format and what information you want to see then I will submit that
to our SOftware dev. office
to check the possibility. then if its possible, they will tell us how much it will
cost. .
Oh okay, so if we want to change the layout we need to contact the software dev.
through you?
yes,
if we only want to change the logo of our company, we should submit it to you or we
can just change it in the PLM ?
actually, there are several changes that we want to make. we thought that it was
part of the service
the standard supply is the reports that you can see now. any changes to the
report has cost..Theoretically... So this is the reason why you must submit
the format you want to see in yoru report so that they (our sofware dev)
can check the possibilities. Posibilities means possible and maybe will really
incur cost or possible to get it free. so, depending on what changes
Ok then, we will make the format that we want and then send it to you. Is that
okay?
yes, please.
for exmaple, we have material with 6000mm in length. we don't do any cutting, we
just want to make holes in the piece. So there is no further process after the
punching in the FICEP is done
do you want to see the drawings?
this process is called piece cut to length.. you dont need to make nesting
sorry, can you explain more? or maybe give some example in the PLM?
nothing to do in PLM, you have the piece, then send it to share as pieces (without
passing through nesting)
Then ,the operator will just select the piece in the piece list, and execute the
program.. No nesting
it means, your material length is exactly the same as the piece lenght in the PLM.
let say these material was already cut somewhere before sending to your FICEP
machine.
the machine will follow the programmed holes. the machine will not execute any
shearing operaion because there is no nesting
again, this is a piece cut to length operation...it is different from the idea of
having holes only but several pieces inside the bar and cut these pieces outside by
another machine
so, is your material already cut into real length or you still need some cleaning
(The front and end) after this ponching operations? - this will fall to nesting if
you still need to cut or clean the leading and tail edges after punching
it is in real length and doesn't need further process after the punching. If we
don't do the nesting, then the Nc.1 file goes straight to the machine?
correct
Ahhh okaaay
we finally udnerstood
thank you
its simple. if you make nesting, the machine will make a shearing..
if you dont make a nesting and just execute the piece, there will be no shearing
operations... only the punching
Okay
I think that's all. We will try
If I can connect ot your machine, I can show where to do this execute things.
let me check
I think machine is not connected to your netwowrk
yes, you can try , let me know if I need to connect.. no problem on Monday
Ok we will contact you again if we need further assistance. Thank you very much,
sorry it's taking a long time hehe
no problem..
thanks also
ok. bye