Professional Documents
Culture Documents
Karcher Trading L.L.C. - File no. 6012 - DS / KS 1 of 1 6012 - 15.10.11 - Door Schedule - HÖ - Rev. 0 - DAFZ Warehouse on Plot W-38B, Dubai
Specification of HÖRMANN Fire Rated Single & Double Leaf Steel Doors Tested to BS 476 Part
22:1987
Types HBS 120 C-1 / HBS 120 C-2 & HBS 90 C-1 / HBS 90 C-2
Surface
Hörmann steel doors (leaf and frame) are delivered galvanised and
primed (powder coated) with an epoxy-polyester powder in grey white,
based on RAL 9002.
Wet coating, spray coating or manually coating on site is required after
installation.
Locking device
Heavy duty mortise lock according to DIN 18250 part 1, prepared for
profile cylinders 35.5 + 35.5 = 71 mm at hinge side 2 steel security
dowel of 15 mm diameter for additional protection against blasts. Lock
fixed into an insulated lock pocket.
Hinges
3 pieces heavy duty 3 part butt hinges 164 mm long with 20 mm spindle, with galvanized finish and ball
bearings. Hinges welded to the leaf and into the rear of the frame.
Vision panel
120 minute fire rated 6mm Pyran S glass
90 minute fire rated 7mm Georgian wired glass
Karcher Trading LLC – Specification HBS 120 C-1 & C-2 / HBS 90 C-1 & C-2 with Ironmongery
Page 1 of 2
Specification of HÖRMANN Fire Rated Single & Double Leaf Steel Doors Tested to BS 476 Part
22:1987
Types HBS 120 C-1 / HBS 120 C-2 & HBS 90 C-1 / HBS 90 C-2
Kindly note the following:
All HBS doors are HBS 120 doors, the door becomes an HBS 90 door in the following cases:
- the door width is greater than 2000mm in the case of a double leaf door
- the vision panel used is 90 minute Georgian wired glass
- the door has an overhead panel
Upon installation of a louver, the door is not anymore fire rated.
All fire rated steel doors to DIN 1634-1 and DIN 1663-1 can withstand the following pressure in case of a fire:
At 1/3rd of the leaf height: +/- 0 Pascal
At the bottom of the leaf at the FFL: - 4.25 Pascal
Maximum at the top of the leaf below the lintel: +20 Pascal
Doors are certified to certificate No 655a to LPS 1056: Issue 6 by the Loss
Prevention Certification Board (LPCB).
Door Type Reference No.
HBS 120 C-1 No. 655a/11
HBS 120 C-2 No. 655a/12
HBS 90 C-1 No. 655a/09
HBS 90 C-2 No. 655a/10
Each fire rated door will have a metal label certifying its fire rating in the rebate
on the hinge side of the door leaf.
Kindly note that the factory in Germany follows strict regulations in the manufacturing of their doors, even more so
when manufacturing fire rated doors, as they must comply with the DIN/EN/BS standards.
For this reason some items may not be added, removed or modified on the doors.
These strict regulations may not allow the flexibility to add ironmongery that is not recommended, however this
strictness ensures that the quality of our products that you, as our clients, receive is never compromised.
Karcher Trading LLC – Specification HBS 120 C-1 & C-2 / HBS 90 C-1 & C-2 with Ironmongery
Page 2 of 2