Professional Documents
Culture Documents
01E
VER: 200907
INSTRUCTION HANDBOOK
SAFETY NOTE
Only qualified personnel are allowed to perform any planning, installation or maintenance work.
The personnel must be trained for the job and must be familiar with the installation, assembly, commissioning
and operation of the product. Sufficient knowledge in lift construction is essential.
Note.: The parts may different with a.m. drawings due to the specail projct or special requirment. Please refer the
delivery list or technical doc.
Note.: The parts may different with a.m. drawings due to the specail projct or special requirment. Please refer the
delivery list or technical doc.
1 Basic Information
The following informations are use for all landing door and car door of GDB series.
The center of the bolt on the stop buffer, represents the vertical reference for the position of all landing and car doors.
For the telescopic doors, the center of the bolt indicated the clear opening line, runby excluded.
For central opening doors, it indicates the center of the clear opening.
Option 1 Option 2
The pin’s eccentricity and the presence of the slots allows considerable adjustment.
局部视图 A
<5MM
CAM CAM
22
22
8 8
8 8
50 50 75 75
MIN.30 MIN.30
8
MAX.35 MAX.35
CAM CAM
27
22
8
8
2 4
90 90 75 75
MIN.30 MIN.30
MAX.35 MAX.35
6CC—6LC SW=136
3CL/R—3LL/R SW=136
CAM
22
8
8
136 136
MIN.30
MAX.35
2 Landing door
Please note, use the specail bolts tofixing the hanger on the top frame
华威头螺栓
Use the fixing brackets to fixng the hange and sill in the shaft as drawings.
---------------------------------------------------------------------------------------------------------------------------------
MIN.15
Locked
MIN.7
3 Car Door
100 80
Move the cam knife to get the right position for the locker roller.
Max. Offset = 200 mm
a= 5~8 mm
Adress:
Unit 68 Dongjing Industrial Park, Dongfu Road, Sip, Suzhou 215123, Jiangsu Province, China
E-mail: info@genesischina.net
Web: www.genesischina.net