Professional Documents
Culture Documents
Document:
Declaration of conformity
REVISIONS
Revision Reason for revision Date
0 First issue 21/06/2021
Summary
Declaration of conformity ............................................................................................................................................................................. 2
Note ........................................................................................................................................................................................................................ 3
Declaration of conformity
Declare
That the responsibile of the technical Datasheet is Eng. Fabio Salvati
Declare also
That the product: pedal assisted bicycle
Model and code: THE ONE – A1 ELEGANCE
Year of manufactur: 2021 Serial number:
We hereby declare that model listed above has passed that all major safety requirements, concerning to:
And is therefore in accordance with the existing directives and current regulations
This declaration of conformity is issued under the sole responsibility of the manufacturer
Date: 21/06/2021
La corretta costituzione del fascicolo tecnico, così come i documenti preparati da C&C s.a.s., sono stati verificati dall’ing.
Renato Carraro.
Note
• The declaration of conformity on page 2 of this document must ALWAYS accompany the product when it is made
available to a third party in any form (sale, loan for use, loan, etc.)
• Only page 2 must accompany the product. Never turn in the first page and include the notes of this page
• • The rules governing the product must be respected and indicated if the presumption of compliance with the
directives is to be confirmed. The lack of reference to the standards may lead the authorities, during a possible
control, to request proof tests.
• The risk analysis, of which we provide a complete model relating to the product under consideration, was conducted on
the basis of the standard (s) indicated by us in the document and written in black (eg Standard IEC 61882: 2016 method
of risk analysis according to the HAZOP method).
• the harmonized standard 12100: 2010 represents an effective means of requesting the requirements of directive
2006/42 / EC and must be applied to the design of any machine. Our company provides an analysis and assistance
service for the application of the standard.