Professional Documents
Culture Documents
TECHNICAL
9 3/4
9 1/16
3/4
3/4
2 7/8
MOUNTING TYPES:
GVEV7.R25111
Swinging Fire Door Closers Certified for Canada
Page Bottom
See General Information for Swinging Fire Door Closers Certified for Canada
For self closing doors, without hold-open feature, surface mounted type, Model F8400 (size 2-6).
For self closing doors, without hold-open feature, surface mounted type, Model F8500 (size 2).
For self closing doors, without hold-open feature, surface mounted type, Model F8900BC (size 2-4).
For self closing doors, without hold-open feature, surface mounted type, Model F1600 (size 3).
For self closing doors, without hold-open feature, surface mounted type, Model F1714 (size 2-4).
For self closing doors, without hold-open feature, surface mounted type, Model F1916 (size 2-6).
For self closing doors, without hold-open feature, surface mounted type, Model F8300 (size 2-6).
For self closing doors, without hold-open feature, surface mounted type, Model F8200 (size 2-3).
For self closing doors, without hold-open feature, surface mounted type, Model F8903 (size 3).
For self closing doors, without hold-open feature, surface mounted type, Models F8916BC (size 2-6), F8915BC (size 2-5), F8936BC (size 3-6),
F8904BC (size 4), and F8905BC (size 5).
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up
Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the
data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must
appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright ©
2011 Underwriters Laboratories Inc.®"
ANSI/BHMA A156.4-2000
American National Standard for Door Controls-Closers
Standard ANSI/BHMA A156.4-2000 contains requirements for surface mounted,
concealed in the door, overhead concealed and concealed in the floor door closers, as
well as pivots for floor closers. The standard includes general information, testing
procedures, and equipment and performance requirements. Typical illustrations,
identifying type numbers and required tests are given for Surface Closers, Concealed
Closers, Pivot Sets, Gate Closers/Dwarf Door Closers and Light Screen/Combination
Storm Door Closers.
Product grades are defined by progressive performance benchmarks in the given tests,
with Grade 1 being the highest level of performance. For example, in the “cycle test,” a
Grade 1 pivot set must be able to perform 2,000,000 cycles, as compared to a Grade 2,
which is required to perform 1,000,000 cycles. The last digit of the product number
identifies the grade of a BHMA product.
Sample Illustration: