You are on page 1of 2

SED 127 (Fluid Mechanics for Teachers)

Preliminary Examination

Name: ________________________________________ Section: ___________ Date: ___________


a. Vector
b. Scalar
1. A fluid is said to be ideal, if it is
c. Both
a. Incompressible d. None of the above
b. Inviscous
7. Two vectors of the same magnitude are
c. Viscous and incompressible
added; one pointing east, one west. The
d. Inviscous and compressible
magnitude of the resultant vector is
e. Inviscous and incompressible
a. 0
2. Mercury does not wet glass, the same with
b. 1
oil floats on water. This is due to property of
c. 2
liquid known as
d. 3
a. Adhesion
8. A 12 N force acting on an area of 3 square
b. Cohesion
centimeters exerts a pressure of
c. Surface tension
d. Viscosity a. 4 N/m2
e. Compressibility b. 400 N/m2
c. 40 000 N/m2
3. Surface tension has unit of
d. 40 N/m2
a. Newtons.m
9. Falling drops of water become spheres due
b. Newtons/m
to the property of
c. m/newtons
d. newtons a. Viscosity
b. Compressibility
4. A 40 N block exerts 20 Pa of pressure on a
c. Surface tension
table. What is the area of the block that is
d. Pressure
touching the table?
10. Poise is the unit of
a. 0.5 m2
b. 1 m2 a. Surface tension
c. 2 m2 b. Viscosity
2
d. 2.5 m c. Density
d. Specific gravity
5. Which of the following measurements is a
scalar measurement?

a. Velocity
b. Acceleration
c. Speed
d. Force

6. The sprinter accelerated towards the finish


line at a rate of 5 meters per second squared.
The given quantity is
Part II: Problem Solving

Direction: Answer the following problems. Minimize erasure and lastly follow the process of solving
word problem (given, what is asked, formula etc.).

1. An unknown fluid in a 1-liter beaker has a mass of 3 kg. Determine the (a) density, (b)
specific volume, (c) specific weight, and (d) specific gravity of the fluid.
2. 500.0 liters of a gas in a flexible-walled container are prepared at 700.0 mmHg and 200.0
°C. The gas is placed into a tank under high pressure. When the tank cools to 20.0 °C, the
pressure of the gas is 30.0 atm. What is the volume of the gas? (9.51 L)
3. Two horizontal plates placed 250mm have an oil of viscosity 20 poises. Calculate the
shear stress in oil if upper plate is moved with velocity of 1250mm/s.

Bonus:

1. What is the specific gravity of a solid sphere that has a radius of 15 mm and has a mass of
0.038 kg?
2. For 2 points, when did I graduated? (month/day/year)

You might also like