Professional Documents
Culture Documents
Group name:_____________________________________________________________________________________
CLO (PLO) CLO (PLO) Assessment: Answer Criteria Attrbutes Subattrbutes Definition Remarks Marks
Proposal
CLO 2 PLO 13 1. Introduction Project Identification - Information 1. Relevance 1. Appropriateness and relavance of
REPORT on design Mengiktiraf keperluan Introduction on product review including name, type or Retrieval and 2. Optimisation references to a task
research to support pembangunan classification, main function, top model / brand (main Management 3. Curation 2. Optimising variety of references (to make
the design process professional dan product reference), general product applications and 4. References useful as possible)
terlibat dengan area. 3. Curate is to select, organize and look for
(A3) pembelajaran kendiri required information according to a list of
dan sepanjang hayat. Appendix: references.
1.PDS on product and part alternative comparison 4. The materials or sources of information
PERSONAL & 2. Part and product function diagram. used to elicit further information regarding
ENTREPRENEURIAL subject matter
SKILLS
1.1 Problem Minimum three (3) design problem based on the main Inquistive Mind 1. Interest 1. Interest to heighten knowledge by
statement product reference chosen or other related product in 2. Initiative exploring certain issues and to execute
Introduction. 3. Effort relevant tasks to the best of one's ability.
2. Demonstrate the level of willingness to
Appendix: start and complete a task.
3. Market survey (Proven pictures; interview 3. To show effort to investigate or search for
analysis/product review from buyer/Questionaire or information.
side observation analysis)
1.2 Objective Minimum three (3) design solution target based on the New Idea 1. Engagement 1. The degree of attention, curiosity, interest,
problem statement to be solved. Acceptance 2. New Idea optimism and passion that students display
related to 3. Independent Learning to heighten the learning process.
independent 2. To express ideas as a result of self
1.3 Scope Mission Statement as learned in Chapter of Product Learning exploration.
Planning in text book. 3. Self-directed learning that involves
learners relate to new information, concepts,
CLO 3 PLO 7 2. Process flow chart of all methods used in the project. 1. Self Confidence 1.1 Relationship Building process which to
1.1 The ability are more
build organised
good and
relationship,
CONSTRUCT a Menunjukkan Methodology 1. Overall Design phases process flow from grouping 2. Respect 1.2 Self-expression interact with others and work effectively with
product model with the kesedaran dan until presentation (Textbook Ref: Exhibit 2-7 Key 3. Social 2.1 Active Listening them to achieve common objectives.
workshop facilities keprihatinan terhadap activities and the responsible functions comprising the Communication 2.2 Respesct for Others 1.2 The abilitiy to express, explain the
and modeling isu berkaitan dengan Tyco Rally Point product development process) 3.1 Interaction with perception of others towards self, and
materials kemasyarakatan, Others receive or give praise and constructive
P3 kesihatan, 2. Detail design process flow from brainstroming to 3.2 Nuturing feedback.
keselamatan, mock up. Relationships 2.1 The abilitity to practice active listening
perundangan dan skills, provide feedback and communicate
kebudayaan serta Appendix: with others from different cultures.
tanggungjawab yang 4. Part Concept generation (sketching), screening 2.2 The ability to recognize and respect the
berkaitan dalam and scoring analysis attitude, behaviour, belief and the rights of
teknologi kejuruteraan 5. Product Morphology based on result in item 1 other people.
reka bentuk produk. 6. Final Product Concept generation (sketching), 3.1 The ability to converse and maintain
Concept screening and scoring analysis. interactions wih others.
INTERPERSONAL & 3.2 The ability to understand and
COMMUNICATION interchange roles between team leader and
SKILL team members.
CLO (PLO) CLO (PLO) Assessment: Answer Criteria Attrbutes Subattrbutes Definition Remarks Marks
Proposal
CLO 2 PLO 13
3. Detail process flow of product developments 4. Self-Awareness 4.1 Etiquette 4.1 The ability to be ethical in carrying
including purchasing maerial, part creation and 5. Social 4.2 Emotion outresponsibilities to society.
manufacturing process, product assembly and finishing Responsibility Management 4.2 The ability to control emotions while
process. 5.1 Rational Attitude socializing.
4. Process flow on cost analysis (Textbook Ref: Exhibit Towards Multicultural 5.1 Sensitive to the problems of society and
13-3 The design for Manufacturing (DFM) method) Society the environment. Able to recognize and
5.2 Contribution to the adopt a rational atitude towards a multi-
Appendix: Mock-up development picture and society cultural society.
overall view. 5.2 The ability to be responsible and take
the initiative / volunteer to be engaged and
able to act as an agent of change in the
society.
CLO 1 PLO 11 3. Gantt Chart Complete design phase planning based on overall 1. Managerial 1.1 Time management 1.1 The process of planning and exercising
CARRY OUT on Menunjukkan methology created in item 2.1 within 14 weeks of 1.2 Decision making concious control over the amount of time
different phase in a kesedaran terhadap semester until dateline of final evaluation and 1.3 Organization of spent on specific activities, expecially to
design process pengurusan, amalan presentation day. ideas increase effectiveness, efficiency or
perniagaan dan productivity.
(C3) keusahawanan. Appendix: 1.2 The process resulting in the selection of
7. Complete proposal slide presentation. a belief or a course of action among several
PERSONAL & alternative possibilities.
ENTREPRENEURIAL 1.3 Present an idea completely in clear,
SKILLS cohesive and organized manner.
2. Entrepreneurial 2.1 Vision 2.1 Innovative vision for solving real world
Mind 2.2 Networking problems.
2.3 Passion 2.2 Awareness to become an entrepreneur
requires the following characteristics:
Entrepreneurial relationship through the
formation of a business circle, personal
integrity, communication and good offers.
2.3 Excitement or liking when performing
entrepreneurial activities.
CLO (PLO) CLO (PLO) Assessment: Answer Criteria Attrbutes Subattrbutes Definition Remarks Marks
Proposal
CLO 2 PLO 13 Delegation of works for individual tasks in contribution 3. Entrepreneurial 3.1 Entrepreneurial 3.1 A process to find opportunities following
to all processes involved in proposal item 2 - methology Skills Opportunities a planned strategy as a result of creative
for group project of product design and development. 3.2 Entrepreneurial consolidating process, generation of new
Experiennce ideas and innovation in the application of
Appendix: 3.3 Risk Tolerance ideas into practice.
8. CAD Part modeling and drawing. 3.4 Internal Locus and 3.2 Learning through engagement in
Control entrepreneurial activities.
3.5 Achievement and 3.3 Atitude and readiness of an
Perseverance entrepreneur in the identification and
3.6 Financial confrontation of the risk.
Management 3.4 Belief in the fundamental of success lies
in self employment and ability to manage
one's life.
3.5 Ability to put a higher target and has
high endurance in facing challenges.
3.6 Ability to handle financial components
and sources.
Draft costing 2. Ethics and 1. Work Responsibility 1. Duties to be carried out as prescribed in
Professionalism 2. Work Relation the scope and terms of reference of the
position held.
2. Relationship with co-workers or within
institution, work groups and community in a
working setting.
3. Work Ethics 3. System of moral rules or principles of
4. Integrity behaviour, which are practiced in a
workplace or a working environment.
4. Level of honesty and being upright in
keeping or defending his/her stand,
principles and accountability in carrying out
a task.
CLO (PLO) CLO (PLO) Assessment: Answer Criteria Attrbutes Subattrbutes Definition Remarks Marks
Proposal
CLO 2 5 13
PLO 10 5. Appendices 1. Values and 1. Moral 1. Personallity, manners and politeness
DEMONSTRATE an Mempamer Attitudes 2. Identity according to universal good and positive
opinion, design, idea, pemahaman tentang 3. Proactive values that are generally acceptable and
concept and other etika professional, considered good by the community.
information clearly and tanggungjawab dan 2. Characteristics of an individual's origin
convinced the norma amalan suc as customs, language, culture and
audience using teknologi religion which make up the pillar and
language gestures and kejuruteraan. potrayal of his personality and bring out the
presentation material. spirit of patriotism and love for the nation-
ETHICS & state.
(A4) PROFESIONALISM 3. A positive attitude to prepare and control
SKILL actions to be performed ahead of
expectations before the occurance of an
event or incident.
TOTAL MARKS: