Professional Documents
Culture Documents
GE
Grid Solutions
Multilin 869 Motor Protection System Instruction Manual
Mounting
The 869 unit can be mounted two ways: standard panel mount or optional tab mounting, if required.
l Standard panel mounting:From the front of the panel, slide the empty case into the cutout. From
the rear of the panel, screw the case into the panel at the 8 screw positions (see figures in Standard
panel mount section).
l Optional tab mounting:The “V” tabs are located on the sides of the case and appear as shown in
the following figure. Use needle nose pliers to bend the retaining "V" tabs outward to about 90°.
Use caution and do not bend and distort the wall of the enclosure adjacent to the tabs. The relay
can now be inserted and can be panel wired.
Log
o
Multilin 8 Series, version 2.80, June 2021
Copyright 2021 GE Multilin all rights reserved.
GE
Grid Solutions
Multilin 869 Motor Protection System Instruction Manual
file:///C:/Users/etorrez/AppData/Local/Temp/~hhE967.htm 9/21/2022
Mounting Page 2 of 4
The standard panel mount and cutout dimensions are illustrated below.
CAUTION:
To avoid the potential for personal injury due to fire hazards, ensure the unit is mounted in a safe
location and/or within an appropriate enclosure.
Log
o
Multilin 8 Series, version 2.80, June 2021
Copyright 2021 GE Multilin all rights reserved.
GE
Grid Solutions
Multilin 869 Motor Protection System Instruction Manual
file:///C:/Users/etorrez/AppData/Local/Temp/~hhE967.htm 9/21/2022
Mounting Page 3 of 4
Note:
The drill hole locations are different when a depth reducing collar is used. See Figure 2.
file:///C:/Users/etorrez/AppData/Local/Temp/~hhE967.htm 9/21/2022
Mounting Page 4 of 4
To mount an 8 Series relay with a depth reducing collar, follow these steps:
1. Drill mounting holes as shown on the panel cutout drawing (Figure 2).
2. Mount the required collar (depth 1.375" or 3") on the captive unit using eight screws as shown.
3. Mount the combined unit and collar on the panel using eight screws as shown.
Log
o
Multilin 8 Series, version 2.80, June 2021
Copyright 2021 GE Multilin all rights reserved.
file:///C:/Users/etorrez/AppData/Local/Temp/~hhE967.htm 9/21/2022