Professional Documents
Culture Documents
Markings
Markings
Wingspan:
Wheel Base:
Marking Particulars
Width of RWY Edge Line
Distance between RWY Centreline and TWY Centreline at
point of tangency
RWY Centreline Width
Seperation distance between RWY Turnpad nosewheel
marking to edge of RWY
Width of displaced THR marking (RWY 10)
Length of displaced THR markings (RWY 10)
Gap between displaced THR Markings (RWY 10)
Width of Transverse strip on at THR
Gap between inner edge of transverse strip and begining of
THR marking
Number of striped in Threshold Markings
Gap between inner strips of THR marking
Gap between THR markings
Length of THR Markings
Width of THR Markings
Distance between Designation marking and THR marking
Length of RWY Designation Marking
Length of C/L markings
Apron
Width of vehicular lane (White)
Width of vehicular lane marking
Seperation distance between lead in/out marking with
obstacle
Width of Aircraft Safety Lines (Red)
Width of markings on non load bearing surface on Apron and
Isolation Bay
Distance between markings on non load bearing surface on
Apron and Isolation Bay
As per DGCA CAR As per site condition
0.9M Complied
0.9M Complied
0.45M Complied
2.25M Complied
0.22M Complied
30M Complied
20M Complied
1.8M Complied
4.2M Complied
0.9M Complied
75M Complied
2.1M (0.3M width of Gap and markings) Complied
as per Pattern B
3.3M
10CM Complied
10CM Complied
0.3M Complied