Professional Documents
Culture Documents
SNAKE DETECTOR
Our Snake Detector Simulator will detect snakes without employing thermal contrast; instead, we
will use an infrared imaging sensor that can be used both during the day and at night with
illumination to boost detection, even if snakes such as pythons have not been basking. All of the
information presented on the detector's screen is reliable because it will be provided by websites
that we have collaborated. The Infrared Imaging sensor, Semiconductor Memory, Battery, and
(FLIR) Infrared Lens, LED and receiver are the main components of our product. Lead (II) sulphide,
Mercury cadmium telluride, Indium, Indium arsenide, Indium gallium, Lead selenide, Platinum
silicide, Silicon, and Germanium will be the other components on making the device.
PARTS
Infrared near Image Sensors- When recognizing snakes, imaging created by sensing
electromagnetic radiations generated or reflected from a specific target surface in the infrared
region of the electromagnetic spectrum (about 0.72 to 1,000 microns) can be observed and stored
Semiconductor memory - is a digital electronic semiconductor device used for storing snakes
information and data regarding its characteristics and location.
Electronic Signal- In electronics, a signal is an electric current or electromagnetic field used to
convey data from one place to another. This electronic signal will produce a not so loud noise on the
device after scanning the properties of the snake. This noise will not scare away the snakes since,
Snakes can only hear a specific frequency range. Because high frequencies are largely conveyed
through the air, they can hear low frequencies but not high frequencies.
LED- Active infrared sensors both emit and detect infrared radiation. Active IR sensors have two
parts: a light emitting diode (LED) and a receiver. When an object comes close to the sensor, the
infrared light from the LED reflects off of the object and is detected by the receiver.
Battery- will be the source of power of the device, this is to ensure the device’s handy feature.
Specific battery like will be the mode of energy. We will be using a specific battery and that is
Enegitech 9V Lithium Batteries that could give you 10 years of shelf life in storage.
TARGET AUDIENCES/Market
People who reside in provinces, mountain campers, and snake researchers are among our target
groups. Because it can enable people living in remote places, particularly in provinces, become
more aware of snakes and obtain more knowledge and information about them in person, the cost
of the innovation will be pricey, but the target populace will surely be able to finance the invention
because it can be employed as an investment or as a source of Labor.