Professional Documents
Culture Documents
PROJECT:
CLIENT :
CONSULTANTS :
MAIN CONTRACTOR :
ALUMINIUM SUB CONTR :
CONTENTS
1.0 Introduction
2.0 Geometry
3.0 Material
5.0 Loadings
This document covers the load calculations, static analysis, and check for the adequacy of the
proposed Steel frame terms of Moment resistance and deflection criteria
GEOMETRY
2.0 MATERIAL
2.1 The Primary frame of the structure of 100x50x3mm steel box RHS
2.2 Outer boarder made of Aluminum box 100x50mm
2.3 Lover blade section used is GE Profile- 09153
4.0 LOADINGS
In addition to the self-weight of the frame structure the wind load is taken into account.
Dead Load
The following load combinations which is the maximum expected critical load combination is
taken for the design of the structure.
6. DESIGN CHECKS
The dead load of the glass system as well as wind load acting on the glass is transferrd to the
frame
Check for wind load
Maximum wind pressure Considered =0.87 Kpa
The supporting structure is composed of steel frame made out of 200x200x6mm mm Steel box
SHS
Load 4
Properties of 200x200x6mm steel box
Area of cross section 4656mm2
Moment of Inertia about X axis-Ixx 29233472 mm4
Moment of Inertia about Yaxis -Iyy 29233472 mm4
Distance of Neutral axis to Edge (along Y-axis) y= 100mm
Distance of Neutral axis to Edge (Along X-axis) x=100 mm
Section modulus – about X axis - Zxx Zxx= Ixx/y =292334.7 mm3
Section modulus – about Y axis - Zyy Zyy= Iyy/x = 292334.7mm3
= 6.16KNm>5.8 KNm
Hence safe
Support connections
Reaction summary
As per the calculation attached using”fixperiemce” software 4 Nos of M12 Anchor Bolt -
120mm length , using 8mm thick base plate is sufficient