Professional Documents
Culture Documents
Project:
B+G+1 RESIDENTIAL BUILDING
SKY LIGHT DESIGN CALCULATION
SKYLIGHT -2
Rev.00
TABLE OF CONTENTS
535....................................................................................................................................................... 1
1 MATERIAL PROPERTIES
............................................................................................................................................................. 2
.............................................................................................................................................................2
............................................................................................................................................................ 2
........................................................................................................................................................... 2
1.4 Anchors
............................................................................................................................................................2
2 Wind load
........................................................................................................................................................... 3
3 DESIGN OF
GLASS.............................................................................................................................................. 4
.......................................................................................................................................................... 4
4 Skylight analysis
......................................................................................................................................................... 5
5 Analysis result:
........................................................................................................................................................ 8
6 Connection
check:............................................................................................................................................ 9
....................................................................................................................................................... 9
1 MATERIAL PROPERTIES
1.1 Design of Member: BS 5950-1
1.1.1 Bracket material: BS5950-1
For designing the bracket, Aluminium
For the elastic properties of steel, the following values should be used
Modulus of elasticity: E=200000 N/mm2
Shear Modulus: G=E/ [2(1+v)]
Poisson’s ratio: v=0.3
Coefficient of thermal expansion: α=11.5x10-6 per o C
1.2 Structural Fasteners
1.2.1 AAMA TIR-A9-91 Metal Curtain Wall Fasteners
1.4 Anchors
Design as per ETAG
3 DESIGN OF GLASS
Glass has been designed according to ASTM E 1300 Standard Practice for Determining Load
Resistance of
Glass in Buildings. Input and results from Windows Glass Design are presented below.
APPENDIX-B
fischer FZE
Enquiry@fischer.ae
www.fischer.ae
Design Specifications
Anchor
Anchor system fischer Bolt anchor FAZ II
Anchor Bolt anchor FAZ II 10/10, zinc plated steel
Anchorage depth 60 mm
Design Data Anchor design in Concrete according European Technical
Assessment ETA-05/0069, Option 1,
Issued 03/07/2017
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 1
C-FIX 1.66.0.0
Database version
2018.1.23.12.1
Date
19/12/2019
Input data
Design actions *⁾
# NSd VSd,x VSd,y MSd,x MSd,y MT,Sd Type of loading
kN kN kN kNm kNm kNm
1 -17.00 4.10 9.30 0.00 0.00 0.00 Static or quasi-static
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 2
C-FIX 1.66.0.0
Database version
2018.1.23.12.1
Date
19/12/2019
( VRd,s )
βVs
Anchor no. % Group N° Decisive Beta
1 11.0 1 βVs;1
2 16.8 2 βVs;2
3 13.9 3 βVs;3
4 18.9 4 βVs;4
( VRd,cp )
Eq. (5.6)
Eq. (5.2)
Eq. (5.2a)
Eq. (5.2c)
Eq. (5.2d)
Eq. (5.2e)
βV,cp
Anchor no. % Group N° Decisive Beta
1, 2, 3, 4 10.0 1 βV,cp;1
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 3
C-FIX 1.66.0.0
Database version
2018.1.23.12.1
Date
19/12/2019
( VRd,c )
Eq. (5.7)
Eq. (5.7a)
Eq. (5.7b/c)
Eq. (5.7e)
Eq. (5.7f)
Eq. (5.7g)
Eq. (5.7h)
βV,c
Anchor no. % Group N° Decisive Beta
1, 2 54.5 1 βV,c;1
3, 4 25.1 2 βV,c;2
Page 4
C-FIX 1.66.0.0
Database version
2018.1.23.12.1
Date
19/12/2019
Technical remarks
All data and information in the software is based on fischer products and common engineering knowledge. Please
check all the proof results against local valid standards and approvals.
As fischer is not the design office, the attached is no guarantee for incorrect input or assumptions. Any
recommendations have to be approved by the building-authority or project engineer. Results are valid only for
anchor system calculated in the attached. If any part of the system is changed, it will invalidate this report and new
calculations would be required.
The transmission of the anchor loads to the supports of the concrete member shall be shown for the ultimate limit state and
the serviceability limit state; for this purpose, the normal verifications shall be carried out under due consideration of the
actions introduced by the anchors. For these verifications the additional provisions given in the current design method shall
be taken into account.
As a pre-condition the anchor plate is assumed to be flat when subjected to the actions. Therefore, the plate must be
sufficiently stiff. The C-Fix anchor plate design is based on a proof of stresses and does not allow a statement about
the stiffness of the plate. The proof of the necessary stiffness is not carried out by C-Fix.
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 5
C-FIX 1.66.0.0
Database version
2018.1.23.12.1
Date
19/12/2019
Installation data
Anchor
Anchor system fischer Bolt anchor FAZ II
Anchor Bolt anchor FAZ II 10/10, zinc Art.-No. 94981
plated steel
Installation details
Thread diameter M 10
Drill hole diameter d0 = 10 mm
Drill hole depth h2 = 87 mm
Anchorage depth hef = 60 mm
Drilling method hammer drilling
Drill hole cleaning only blow out by hand
Installation type Push-through installation
Annular gap Annular gap not filled
Installation torque Tinst = 45.0 Nm
Socket size 17 mm
Base plate thickness t = 10 mm
Total fixing thickness tfix = 10 mm
Tfix,max tfix, max = 10 mm
Attachment
Profile type Customized profile
Profile dimensions mm
Height 100
Width 50
Flange thickness 3
Anchor coordinates
x y
Anchor no. mm mm
1 -50 50
2 50 50
3 -50 -50
4 50 -50
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 6