Professional Documents
Culture Documents
0
Database version
2018.12.13.9.39
Date
19/08/2020
fischer FZE
Enquiry@fischer.ae
www.fischer.ae
Design Specifications
Anchor
Anchor system fischer Injection system FIS V
Injection resin FIS V 360 S
Fixing element Threaded rod FIS A M 10 x 150 8.8, zinc plated steel,
property class 8.8
Anchorage depth 70 mm
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 1
C-FIX 1.73.0.0
Database version
2018.12.13.9.39
Date
19/08/2020
Input data
Design actions *⁾
# NSd VSd,x VSd,y MSd,x MSd,y MT,Sd Type of loading
kN kN kN kNm kNm kNm
1 -2.30 0.27 0.10 0.00 0.00 0.00 Static or quasi-static
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 2
C-FIX 1.73.0.0
Database version
2018.12.13.9.39
Date
19/08/2020
(VRd,s)
(VRd,b)
g g g
αj,V V Rk γM,m V Rd VSd β V,b
kN kN kN %
1.00 8.00 2.50 3.20 0.29 9.0
(VRd,c,.)
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 3
C-FIX 1.73.0.0
Database version
2018.12.13.9.39
Date
19/08/2020
g g g g g
. αj,V V Rk,c,. γM,m V Rd,c,. V Sd,. β V,c,. β V,c
kN kN kN % %
1.00 8.00 2.50 3.20 0.27 8.4
9.0
1.00 8.00 2.50 3.20 0.10 3.1
(VRd,pb)
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 4
C-FIX 1.73.0.0
Database version
2018.12.13.9.39
Date
19/08/2020
Technical remarks
The transmission of the anchor loads to the support shall be shown for the ultimate limit state and the serviceability limit
state. For this purpose, the normal verifications shall be carried out under consideration of the actions introduced by the
anchors. For these verifications the provisions given in the current design method shall be taken into account.
As a pre-condition the anchor plate is assumed to be flat when subjected to the actions. Therefore, the plate must be
sufficiently stiff. The C-Fix anchor plate design is based on a proof of stresses and does not allow a statement about
the stiffness of the plate. The proof of the necessary stiffness is not carried out by C-Fix.
During the design process, the following hints and warnings were issued:
• In the current view a bottom edge is selected. Assuming this as joint from the masonry to the concrete slab we don't
do any calculation for edge failure in this case.
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 5
C-FIX 1.73.0.0
Database version
2018.12.13.9.39
Date
19/08/2020
Installation data
Anchor
Anchor system fischer Injection system FIS V
Injection resin FIS V 360 S (other cartridge sizes Art.-No. 68435
available)
Fixing element Threaded rod FIS A M 10 x 150 8.8, Art.-No. 517935
zinc plated steel, property class 8.8
Installation details
Thread diameter M 10
Drill hole diameter d0 = 12 mm
Drill hole depth h1 = 70 mm
Anchorage depth hef = 70 mm
Drilling method hammer drilling
Installation type Pre-positioned installation
Maximum torque Tinst,max = 10.0 Nm
Socket size 17 mm
Base plate thickness t = 8 mm
Total fixing thickness tfix = 8 mm
Tfix,max
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 6
C-FIX 1.73.0.0
Database version
2018.12.13.9.39
Date
19/08/2020
Attachment
Profile type None
Anchor coordinates
x y
Anchor no. mm mm
1 0 250
2 0 -250
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 7