Professional Documents
Culture Documents
Figure 1
Objective: To find the deflection, stress, strain, shear force and bending moment diagram of
cantilever beam shown in Figure 1 .
Point load, P = -3 N
PROCEDURE
STEP
Note:
Click "Apply" button or press cntrl+enter key after completing each step. "Done" message appears on
message box for every step executed successfully.
1 SMSD
FEASTSMT
At the end of the above operation/s, your screen should look like this.
Click
here for
labelling
2. Create a line
Commands : CURVE, LINE
Menu : Geometry Curve Create Line
Parameters :
End points Use Mouse to pick the points
Entity ID 1
2 SMSD
FEASTSMT
At the end of the above operation/s, your screen should look like this.
Note:
3 SMSD
FEASTSMT
At the end of the above operation/s, your screen should look like this.
4. Erase curve
Commands : CURVE, ERASE
Menu : Geometry Curve Miscellaneous Erase
Parameters :
Note:
4 SMSD
FEASTSMT
Parameters :
Node IDs Select the node at the left
boundary
BC Value 1/0/2/0/3/0/4/0/5/0/6/0
LCS ID 0
At the end of the above operation/s, your screen should look like this.
5 SMSD
FEASTSMT
6 SMSD
FEASTSMT
At the end of the above operation/s, your screen should look like this.
7 SMSD
FEASTSMT
At the end of the above operation/s, your screen should look like this.
8 SMSD
FEASTSMT
ere
Message box
Note:
i) Deformed shape
Command : POST, DISPDEFORM
Menu : Post Deformed shape
Parameters :
Scale factor 1
9 SMSD
FEASTSMT
At the end of the above operation/s, your screen should look like this.
Component BENDING-XY
Decimal Places 2
No. of contours 9
Element List All
10 SMSD
FEASTSMT
At the end of the above operation/s, your screen should look like this.
Component BENDING-XY
Decimal Places 2
No. of contours 9
Element List All
11 SMSD
FEASTSMT
At the end of the above operation/s, your screen should look like this.
Component SHEAR 1
Plane Plane-1
Decimal Places 2
Scale Factor 1
No. of contours 9
12 SMSD
FEASTSMT
At the end of the above operation/s, your screen should look like this.
13 SMSD
FEASTSMT
At the end of the above operation/s, your screen should look like this.
c. *.DAT file shows the input data and *.OUT file shows the output file.
Note:
Ans:Deflection,δ=0.0144mm
14 SMSD