1. SCOPE
Ld This specification covers six
grades of cationic emulsified asphalt for
tue in pavement construction in the man-
net desiguated,
NOTR—See AASIITO M 140 for emul.
slons other thaa eatonie
12. The values stared in SI units are
(o be regarded as the slundurd.
2, REFERENCED DOCUMENTS
21 AASHTO.
‘M140 Emulsified Asphalt
RS Selection and Use of
Emuleified Aephalte
14) Sampling Bituminous
Materials
Standard Specification
for
Cationic Emulsified Asphalt
AASHTO DESIGNATION: M 208-96
(ASTM DESIGNATION: D 2397-97)
‘759 Testing Emulsified As-
phalts
T 200 pH of Aqueous Soln
tions with the Glass
Electrode
3. REQUIREMENTS
3.1 The emulsified asphalt shall be
homogeneous. Within 14 days after de-
livery and provided separation has not
been cansed by freezing, the emulsified
asphalt shall be homogeneous afer thor-
ough mixing.
3.2 Emulsified asphalt shall conform
to the requirements prescribed in Table 1
4, SAMPLING
4.1 Samples of emulsified asphalt
shall be ken in accordance with
AASHTO T 40, Sampling Bituminous
Materials
4.2 Samples shall be stored in elean
airtight sealed containers at a tempera
tre of not less than 4.5°C (40°F) until
tested.
5. METHODS OF TEST
S.A. The properties of the emulsitied
alts given in Table 1 shall be deter
mined in accordance with T 59, Testing
Limulsified Asphalt, with the following
exeeptin:
52. Sieve Test—Use disiled water
in all wetting and washing operntions
in place of sodium oleate solution (2
percent)
149150 SPLCUSICATIONS FOR MATERIALS. M 208
TABLIE1 Requirements and Types! Applications for Caunie Kmulsified Asphalt:
Type Rapid-Setting Slow-Seuing
aan RST cRs2 Sr
sain [Max | Min [Max Max | Min | stax
‘Test on emulsions
Visowity, Saybote Ful at 250 CH, § 20 | 100 | 20 | i
Viscosity, Saybott Puol at 50% (122", 5 20 | 10 | 100 | 40 | 30 | aso | so
Storape stability tex, 24 h, pexcent & ” " ® »
mlsibility, 35 mL 0.8 peecent
Sodium dioety! sultsueinate, percent | 40 a
Coating, abilicy and water resistance
Coating, diy aggegare god
Coating, after symaying tur
Couting, wer aggexane lair
Coating. after spying fase
Panicle charge test postive positive positive positive restive
Sieve test, porcent bau aa? uo" 10 oat
Cement aixing test, peseent 20 20
Distittion:
Git stilts, by volume of esnulston,
percent 3 3 2
Residue, percent oo 63 65 65 37 7
Tests on reside from disilatio test
Penetration, 25°C (FTE), 100,53 | 10a | 250 | 10 | asa | 100 | 250 | a0 woo | 2s0 | ao |
Dusiilty, 25°C G79, Semimin, em | 40 40 40 40 40 49
Solubility in tcictloreiylene, pesceut | 97.5 975 213 95 915 915;
* Refer to R 5 for epic aplication,
* This test eaiement og representative simples may be waved if sce a
on Of the mae seen achieved in he fl