Professional Documents
Culture Documents
09
Date : 21/09/2022
Page : 1/7
Recommended anchors
ChemSet Reo 502 Plus + ChemSet Anchor Studs Hdg Gr5.8 M16x190 Effective embedment : 80 mm
Base material
Concrete resistance : 32 Mpa
Cracking of concrete : Cracked concrete
Thickness of concrete : 180 mm
Reinforcement type : Wide concrete reinforcement
Edge reinforcement : Straight edge reinforcement
Conditions
Installation conditions : Dry concrete
Short term temperature : 40 °C
Long term temperature : 24 °C
Anchor plate
Thickness of part to be fixed : 10 mm
Recommended plate thickness : The base plate thickness has not been checked
Clearance diameter : 18 mm
Profile : 150 UB 18.0
Profile position : Ex = 0 mm ; Ey = 0 mm
Stand-off : None
Dimension L : 25 mm
Lg position of gravity center: 25 mm
Weight P : 0 kg
Action F : 68 kN
Action NR : 0 kN
Working life : 0
Ref : 21/09/2022 - 17:24:58 / Version 2021.09.09
Date : 21/09/2022
Page : 2/7
Geometry :
Calculation Hypothesis :
- The anchoring plate is assumed to be sufficient to resist deformation imposed by the load actions.
- Connection between profile and base plate has not been checked
- RAMSET can only be held responsible if the calculation examples exactly reflect the application and if the installation is
carried out according to the instruction given in the RAMSET specifications. The calculation is correct for RAMSET anchors
only. The
contractor or specifier should make sure that the base material is able to support the loads especially in the case of a group of
anchors. RAMSET cannot be held responsible if this software package is modified without its written approval.
Ref : 21/09/2022 - 17:24:58 / Version 2021.09.09
Date : 21/09/2022
Page : 3/7
Loads on anchors
4 4.09 kN 0 kN -17 kN
8.19 4.09 0 0
* *
Vg [kN] Vh [kN]
68 17
Utilization
CALCULATION DETAILS
INSTALLATION DATA
ChemSet Reo 502 Plus + ChemSet Anchor Studs Hdg Gr5.8 M16x190 Effective embedment : 80 mm
Effective embedment : 80 mm
Minimum thickness of base material : 116 mm
Hole diameter in the base material : 18 mm
Hole depth in the base material : 80 mm
Installation torque : 95.00 Nm
Base plate thickness : 10 mm
Profile family (section type) : 150 UB 18.0
Clearance diameter : 18 mm
INSTALLATION Method