Professional Documents
Culture Documents
com
e-mail : http://LGEservice.com / techsup.html
WASHING MACHINE
SERVICE MANUAL
CAUTION
READ THIS MANUAL CAREFULLY TO DIAGNOSE TROUBLE
CORRECTLY BEFORE OFFERING SERVICE.
■ Child-Lock
The Child-Lock system has been developed to prevent
children from pressing any button (except Power button)
to change the programme during operation.
■ Auto Restart
Although the washing machine is turned off by a power failure,
it restarts automatically where it stopped when power is
supplied again. and it will be the same the machine is
unplugged and is plugged in again.
water
temperature
washing time
Crease Care
Time Save
■ ACCESSORIES
Hot/Cold (2EA)
Cold (1EA) Wrench
Low
High
• Make sure that the hose is not twisted. • Avoid submerging the end of the hose.
※ The drain hose should be placed under 100cm from the floor.
• Connect the power plug to the wall outlet. • Avoid connecting several electric devices,
It may be the cause of a fire.
Preparation for Press the power button. Press the START / PAUSE
washing. button.
Check the water heating. Check automatic reverse Check the water supply.
turn.
Check drain and spin Power off and open the Water removal
door
10
Time Delay
• Press the button when delayed
washing is needed.
• When the button is pressed,
[ ] is displayed,
maximum delay of [ ]
hours can be set.
• Each press advances time delay
by the hour.
• Use [Power] button to cancel
[Time Delay]
• [Time Delay] means the time
required from the present to the
completion of washing.
11
42
87
2:35
26
51
1:22
1:03
58
Hand Wash 57
11
Spin
✽ Pre Wash : If the laundry is heavily soiled, “Pre Wash” course is effective. Pre Wash is available in Cotton and Synthetic Program.
✽ Eco : By selecting Eco function, the water temperature is reduced and washing time is lengthened. So you can economize in your
consumption of energy.
✽ Rinse+ : If you wish to rinse more, the Rinse+ function will remove any trace of detergents.
✽ Bio : If you want to eliminate protein stains (milk, blood, chocolate...), you may select Bio function by pressing the option button.
✽ Quick 30 : By selecting this function, you may wash a small quantity of colored laundry which is lightly soiled fast.
✽ You can select Bio function and Eco function when temperature is higher than 60˚C in Cotton and Synthetic. If the function is
selected, the beginning water temperature can not be changed.
12
Pressing number of
[START / PAUSE] button Checking Point Display Status
4 times Inlet valve for pre-wash operation Water level frequency (225~265)
Inlet valve for main-wash operation
5 times Water level frequency (225~265)
Hot inlet valve in case of hot water fill
6 times Inlet valve for main-wash operation Water level frequency (225~265)
7 times Counterclockwise spin (right) Motor rpm (About 50)
8 times A Heater is in operation for 3 sec. Water Temperature
9 times Draining pump operation Water level frequency
10 times Auto off operation
13
1 WATER INLET ◦ Water has not reached to the pre-set level within 4 min. since
ERROR inlet valve operated, or water has not reached to the normal
level within 25 min.
7 HEATING
◦ The thermistor is out of order.
ERROR
14
NO POWER
Is the power plug connected firmly to
220-240V~ outlet?
YES
Visit to check
YES
YES
NO
Is filter in the inlet valve clogged with foreign Clean the filter of
inlet valve
material? YES
NO
Visit to check
15
NO
Visit to check
。Drain Trouble
Is displayed?
YES
Visit to check
16
YES
Visit to check
17
CAUTION
NO POWER
YES
(RED) (WHITE) (WHITE) (BLUE)
Cancle the
Child-Lock by pressing
Does the Child-Lock is set? both Crease Care, Spin
YES simultaneously for 3
seconds.
NO
NO
Visit to check
18
NO
Is the inlet valve filter clogged with impurity? YES Clean the filter.
NO
option (HOT)
Is resistance of the inlet valve connector NO Replace the inlet valve.
between the 2 to 8 kΩ?
YES
NO Refer to solution
option (HOT) Is water supplied?
「NO INLET」
YES
19
option (HOT)
Is water supplied? Refer to
NO
「NO WATER SUPPLY」
YES
Are receptacles correctly connected to the Check the wiring on the
terminals of inlet valve? NO dispenser.
YES
Is softener put in the correct compartment of Put it in the correct
NO compartment.
drawer?
YES
ABNORMAL SOUND
NO
NO
20
AC 220-240V
DRAIN MALFUNCTIONING
NO
NO
NO
(RED) (WHITE) (WHITE) (BLUE)
21
RED
After power off,is the resistance of wire
YELLOW
(RED-YELLOW) connectors between
YES Normal
10 to 30 ?
1 2 3
NO
YES
22
NO
1 2 3 4
(RED) (WHITE) (WHITE) (BLUE) Is it disconnected, or disassembled?
[Red:3pin (①), White : 2pin( ), National:4pin( ), YES Correct the connector.
White:3pin( )]
NO
1 2 3 4 5 6 7 8 9 10
YES
23
CONTROL PANEL
PLATE ASSEMBLY (TOP) ① Unscrew 2 screws on the back of the top plate.
② Pull the top plate backward and upward as shown.
PANEL ASSEMBLY
(CONTROL)
24
DRAWER
DISPENSER ASSEMBLY
25
3
2 ① Disconnect the wiring receptacle.
1
② Unscrew 2 screws from the back.
※When reconnecting the connector
VALVE #1 (MAIN) White / Black-Black
VALVE #2 (PRE) Gray / White - Black
LOWER COVER
■ Open the lower cover cap by using coin and pull out the
lower cover in the arrow direction after a screw is
unscrewed.
DOOR
26
27
(PULLEY)
① Unscrew 2 screws from the bracket.
② Push the motor in the arrow direction for
disassembling.
③ When reassembling the motor, make sure that motor
mounting bushings are not taken off from the bracket.
(MOTOR)
(DAMPER)
001
2 3
2
1
Open the lower cover cap (①) by Unplug the drain plug (②), then Take out any foreign material
using a coin. Turn the drain plug the water flows out, from the pump filter (③). After
(②) to pull out the hose. At this time use a vessel cleaning, turn the pump filter(③)
to prevent water flowing on the clockwise and insert the
floor. If the water does not flow any drain plug (②)to the original
more,turn the pump filter (③) open place. close the lower cover cap.
to the left.
28
Tub Pump
Bellows
HEATER
CAUTION
THERMISTOR
29
30
A485
31
F322 F321
F300 F170
F320
F160
F430
F225
F220 F120
F215 F110
F210
F130
34
K332
K333
K330
33