Professional Documents
Culture Documents
BASED LAB
TASK REPORT
Page 1 of
9
TITLE OF THE TASK
FOR A CLASS N NETWORK SETUP, SEPEARTE A
SINGLE NETWORK OF SAME CONFIGURATION
WITH TWO SUBNETS
Submitted by
ARUNPRASADH C
201CS122
Page 2 of
9
OCTOBER 2022
DECLARATION
I affirm that the lab task work titled “FOR A CLASS N NETWORK SETUP, SEPEARTE
A SINGLE NETWORK OF SAME CONFIGURATION WITH TWO SUBNETS
” being submitted as the record of original work done by us under the guidance of
RAJASEKAR S S , Assistant Professor(II), Department of Computer Science.
(Signature of candidate)
ARUNPRASADH C
(201CS122)
RAJASEKAR S S
(Signature of the Guide)
Assistant Professor(II)
Page 3 of
9
TABLE OF CONTENTS
2. BLOCK DIAGRAM 7
3. METHODOLOGY 7
4. CODE 8
5. OUTPUT 10
6. CONCLUSION 10
7. REFERENCE 10
Page 4 of
9
OUTCOME BASED LAB TASKS
RUBRICS FORM (*to be filled by the lab handling faculty only)
Student name:
Register number:
Name of the laboratory:
Name of the lab handling faculty:
Name of the task:
Experiments mapped:
1. 2.
3.
Page 5 of
9
FOR A CLASS N NETWORK SETUP, SEPEARTE A
SINGLE NETWORK OF SAME CONFIGURATION
WITH TWO SUBNETS
For a class B network setup, separate a single network of same configuration with
two subnets
BLOCK DIAGRAM
METHODOLOGY PROPOSED
● Start the Cisco packet tracer first.
● The LAN setup contains PC0,PC1,PC2,PC3, two switches and a router.
Page 6 of
9
● Make sure you connect all Devices you want to data share from in the switch
● connect devices with automatically connection type
● Setup the IP configuration for the PCs
● Now setup IP config for router for switch0 and switch1.
● Now setup gateway for PCs in such a way that works perfectly
● Now send message from PC0 of switch0 to PC2 of switch1 and PC1 to PC3,
if the data transfer successful then connection made with two subnets.
CODE
Page 7 of
9
OUTPUT
1. Setup
Page 8 of
9
CONCLUSION
REFERENCE
1. https://www.geeksforgeeks.org/subnetting-implementation-in-cisco-packet
Page 9 of