1 20 Unit CONECTION 4-1/16" x 3000 # x 2000# (R-37). TECHNICAL SPECIFICATIONS
PCP Drive Head 200HP.
EVALUATION MATRIX FOR PCP DRIVE HEAD.
Motor Description Characteristics Power (Exclusive). Two of 100 Hp. Speed (rpm) 1180-1185. Enclosure (Encl.) (Exclusive). TEFC. Type (“Type”) (Exclusive). ET. Service factor (s.f). 1.15. Frame. 444-5T/280SM N ° of Phases 3 Nominal Current (Amp.). 110 C/U Voltage (Volt.) 208-230 / 460 V. Frequency (Hz). 60. Isolation F Work position. Vertical. Type of load. Constant power. UL certification. Class 1, divition 2, group B,C and D. Temperature (° C). 40. Degree of Protection (IP). 55. Power factor (p.f). 1,00 Noise Level 65 db (A) Stator Silicon steel. Thermochemically treated. Painting. Synthetic base of enamel alkyd resin (Exceeds ASTM B117 Salt Spray Test). Approximate Weight. 1067 Lb. Test According to IEEE 112-B standard or CSA method C390 Thermal Class H (180°C) Oven Drying Dielectric Varnish Fan. IP55 protection. Compliance. Use for frequency inverter. Description Dual head (“Drive Type”). (“Direct Drive”). (“Shaft Type”). (“Holow”). (“Drive Style”). (“Bearing box”). (“Input Style”). Vertical. (“Drive ratio”). 3,5:1 Description Rating (“Maximun Input Polish Rod”) torque (Feet- 3500 Lds.). (“Thrust Bearing-ISO Rating”) (Lds.). 80000 (“Maximun Input Polish Rod Speed”) (RPM). 600 TECHNICAL SPECIFICATIONS (“Horse Power Rating”) (HP). 200 (“Maximun Operating Temperature”) (°C). 50 (“Polish Rod Size”) (in). 1-1/2 (“Frame Type”). (“Dually”). (“Centrifugal Breaking system, Hydrodynamic (“Back-spin Control”). o Similar”). (“Wellhead Conection”) (Exclusive) 4-1/16" x 3000 # x 2000# (R-37). Description First Move (“Driven Sheave Max. Diameter”) (in.). 31.5 (“Drive Sheave Max. Diameter”) (in.). 9 (“Drive Belt Type”). “V-Belts” (“Maximun Number of Belts”). (5 - 4 “per side”). (“Housing rated pressure”) (“For Stuffing 3000 Box”). (“Stuffing Box Seal pressure static”) 1500 (PSI). (“Stuffing Box Packaging”) (in) Exclusive. > 1/2” (“Type of Stuffing Box”). (“Conventional or Similar”). Total Height 35” Total Weigth 1160 lbs. Continuous Torque 2100 ft-lb Movement Principle Electric Motor frequency inverter Speed Index 50-340 rpm ✓ ISO-9001 Certification ✓ Minimum 1 year warranty on parts Certification / Warranty (Exclusive) and V-Belts. ✓ 1 set of Additional V-Belts.