This document provides instructions for a student's homework assignment on fits and tolerances. The student is asked to calculate maximum and minimum limits for shafts and holes using provided tolerance tables, name the type of fit obtained, and find the maximum and minimum clearance or interference for three given fits: (a) 180H7/n6, (b) 120H7/s6, and (c) 40G7/h6. The homework is due on October 16th, 2022.
This document provides instructions for a student's homework assignment on fits and tolerances. The student is asked to calculate maximum and minimum limits for shafts and holes using provided tolerance tables, name the type of fit obtained, and find the maximum and minimum clearance or interference for three given fits: (a) 180H7/n6, (b) 120H7/s6, and (c) 40G7/h6. The homework is due on October 16th, 2022.
This document provides instructions for a student's homework assignment on fits and tolerances. The student is asked to calculate maximum and minimum limits for shafts and holes using provided tolerance tables, name the type of fit obtained, and find the maximum and minimum clearance or interference for three given fits: (a) 180H7/n6, (b) 120H7/s6, and (c) 40G7/h6. The homework is due on October 16th, 2022.
Kurdistan Regional Government-Iraq حكومهتا ههرێما كوردستانێ – عیراق
Ministry of Higher Education and Scientific زانستیAوهزارهتا خوێندنا باال و توێژینێت
Research, Duhok Polytechnic University زانكویا پولیتهكنیكی یا دهوك Technical Institute - Duhok / Manufacturing – دهوكAپهیمانگهها تهكنیكی Technology Dept. پیشهسازی.پشكا ت
Student Name: Subject: fits and tolerances
(Morning study) 2nd Stage /semester 1 (Homework No: 1) Date: 9 /10 /2022 Q/1) Calculate the maximum and minimum limits for both the shaft and hole in the following; using the tables for tolerances and name the type of fit obtained, then find the max. and min. clearance / interference / transition: (a) 180H7/n6 (b) 120H7/s6 (c) 40G7/h6. (To be submitted on 16/10/2022).