Description For cleaning aircraft interior surfaces, mix 1 part
ALK-774 is a biodegradable, water-dilutable, ALK-774 with 20 parts of water. Apply to surface environmentally safe cleaning compound, being cleaned with a rag or spray bottle. Pick primarily used for light to heavy duty removal of up loosened dirt and ALK-774 solution with a oil, grease, hydraulic fluid, and exhaust tract film clean, dry rag. No other rinse is necessary. This from aircraft exteriors. It may be used for general procedure is used on nonporous surfaces, such as purpose cleaning of cabin and baggage areas of metal, wood, and vinyl plastics. aircraft interiors, as well as gas trucks, ground Note: Prolonged skin contact with ALK-774 will service units, and freight-handling equipment. defat the skin. ALK-774 is also intended to be used to clean Health Precautions surfaces prior to recoating with adhesives, primers, sealants, and paint topcoats. This product is safe to use and apply when recommended precautions are followed. Before Material Properties using this product, read and understand the • Clear, blue-green, concentrated detergent Material Safety Data Sheet (MSDS), which liquid; nonflammable; pH 9. provides information on health, physical and environmental hazards, handling precautions and • Rapid biodegradation and efficient oil separa- first aid recommendations. An MSDS is available tion in wastewater treatment facilities. on request. Avoid overexposure. Obtain medical • Readily rinses with water and dries streak-free. care in case of extreme overexposure. • Safe on plastic transparencies, paint, and elec- For industrial use only. Keep away from trical insulation. children. • Safe on aircraft structural metals and high- Additional information can be found at: strength steel. www.ppgaerospace.com • Approved by or conforms to MIL-PRF-87937D, For sales and ordering information call 1-800-AEROMIX (237-6649). Type IV. Use For spot cleaning or heavy-duty cleaning, such as oily soils or exhaust tracts, mix 1 part ALK-774 with 4 to 6 parts’ water. Apply by brush, mop, or spray. Allow 5-10 minutes for penetration, then agitate with a brush, and thoroughly rinse with water. For normal aircraft/equipment cleaning, mix 1 part ALK-774 with 10 to 12 parts’ of water. For light-duty cleaning, mix 1 part ALK-774 with 18 to 20 parts water. Apply by mop, spray, or foam- generating equipment and allow the solution to dwell on the surface 5-10 minutes. Agitate with a brush or mop, and thoroughly rinse with water.
W h e r e S m a r t S o l u t i o n s Ta k e F l i g h t ® ALK-774 Aero sp ac e Eq ui p m ent Cl eaner
PRC-DeSoto International, Inc.
All recommendations, statements, and technical data contained herein are based on tests we believe to 12780 San Fernando Road be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be Sylmar, CA 91342 construed as a warranty, either expressed or implied. User shall rely on his own information and tests to Telephone (818) 362-6711 determine suitability of the product for the intended use and assumes all risks and liability resulting from Toll Free (800) AEROMIX his use of the product. Seller’s and manufacturer’s sole responsibility shall be to replace that portion of the www.ppgaerospace.com product of this manufacturer which proves to be defective. Neither seller nor manufacturer shall be liable to the buyer or any third person for any injury, loss, or damage directly or indirectly resulting from use of, Issue Date: 07/12 or inability to use, the product. Recommendations or statements other than those contained in a written Supersedes: 10/04 agreement signed by an officer of the manufacturer shall not be binding upon the manufacturer or seller. Lit: 4903 Printed in the U.S.A