Professional Documents
Culture Documents
A bootstrap sweep generator is a time base generator circuit whose output is fed back
to the input through the feedback
True
Falues
Ans True
Ans A
a) constant Voltage
Ans B
Ans A
Ans B
b) sweep generator
d)a and b
Ans A
Ans A
a) Swatooth generators
b) relaxation oscillators
c) Volage controller
d) Emitter follower
Ans B
b) dc voltage given
d) both b and c
Ans A
43. Relaxation oscillators are widely used in
A cro
B voltage regulator
C function generators
D constat circuits
Ans C
d) b and c
Ans A
A one to many
B many to one
C One-to-one basis
e) All the above
Ans C
46. Relaxation circuits are the circuits in which the timing interval is established through?
A decrese capacitance.
Ans D
47. synchronization gets achieved when the following conditions are satisfied.
a) TP < TO
b) TP < Ta
c) TP < Tb
d) TP < Tc
Ans A)
a) ramp input
b) trigger pulses
c) narrow pulses
d) b and C
Ans D
a) oscilator circuit
d)none
Ans B
Ans D
51. An Electronic generator that generates the high frequency saw tooth waves can be
termed as a
b)oscilltor
c)sawtooth wave form
d)blocking oscillator
Ans A
52. the signal to sweep the beam horizontally across the screen called as
A design current
b) slope current
c) sweep voltage
d)sweep current
Ans c
53. Sweep voltage must increase linearly with time. The rate of change of sweep voltage
with time must be constant. This deviation from linearity is defined as
a) sweep voltage
b) sweep current
ans c
54. A time base generator that provides an output voltage waveform that varies
linearly with time is called as a
d) none
Ans a
55. linearity is the maximum difference between the actual sweep voltage and the linear
sweep which passes through the beginning and end points of the actual sweep is called as
a) Displacement error
b)slope error
d) none
Ans A
56. a sweep signal passes through a high pass circuit, the output gets deviated from
the input
a) Displacement Error
b) Transmission Error
Ans B
60. Time base generator takes certain time to begin a new cycle.
a) True
b) False
View Answer C
Ans A
71. The sampling gates help in selecting the transmission signal in a certain time interval
That time period is selected using a
a) control signal
b) selection signal.
c) Timing signal
d) Both a&b
Ans B
72. These type of sampling gates can pass either positive or negative going pulses through
them………….
a)Unidirectional Sampling gates
b)bidirectional sampling gates
c)both a& b
d)none
Ans A
73.These type of sampling gates can pass both positive and negative going pulses through
them.
Ans B
a)Sampling scope
d) None.
Ans A