Professional Documents
Culture Documents
Applied 263A
Research Potentiostat/Galvanostat
Specifications
Power Amplifier Differential Electrometer
Compliance Voltage: ±20 V Input Bias Current: <50 pA at 25°C, typ. <20 pA at 25°C
Maximum Current: ±200 mA (±2 A with 263A/94 option) Max Voltage Range: ±10 V
Rise Time: <1 µs (No Load) Max Input Voltage Differential: ±10 V
Slew Rate: >1 V/µs (No Load) Bandwidth: –3 db @ >4 MHz
Offset Voltage: <100 mV
System Performance Offset Temperature Stability: <50 mV/ ºC
Minimum Timebase: 30 µs Common Mode Rejection:
Minimum Potential Step: 250 µV >70 dB at 100 Hz
Noise and Ripple: <50 mV rms typical >60 dB at 100 kHz
Minimum Current Range: 100 nA (hardware) Input Impedance: >1012 Ω, in parallel with 20 pF
Minimum Current Range: 1 nA*
Minmum Current Resolution: 2 pA Potential/Current Control
Drift: <50 mV/°C Digital/Analog Converters (DACs)
Bias DAC
iR Compensation Resolution: 14 bits
Positive Feedback Range (Potentiostat): ±8 V
Range: 20 MΩ to 20 Ω depending on current range Range (Galvanostat): ±200% of full-scale current
Resolution: 0.05% of current range Modulation DAC
Current Interrupt Resolution: 16 bits
12 bit DAC Potential Error Correction Range (Potentiostat): ±8 V, ±0.8 V, ±0.08 V
Total Int. Time: <50 ms – 2050 ms Range (Galvanostat): ±200%, ±20.00%, ±2.000%
Computer interface
GPIB IEEE-488 and RS232