Professional Documents
Culture Documents
SOLUTIONS
Industrial Flooring Solution
2
CONTENTS
MOISTURE BARRIER
PENTENS T-303 04
PENTENS E-502 05
COATING
PENTENS E-620 06
PENTENS E-603 07
FLOOR HARDENER
PENTENS TOP 1 09
CEMENTITIOUS
PENTENS T-303M 10
POLYURETHANE
PENTENS PU FLOOR-MF 11
PENTENS PU FLOOR-HD 12
SELF-LEVELING
PENTENS E-601 13
ANTI-SLIP
PENTENS Epoxy Flooring 14
PENTENS E-601 Orange Peel 15
ANTI-STATIC
PENTENS E-601AS 16
PENTENS E-603AS 17
PENTENS E-620AS 18
DECORATIVE
PENTENS E-601 19
ATHLETIC
PENTENS T-250 (RC Substrate) 20
PENTENS T-250 (AC Substrate) 21
3
MOISTURE BARRIER
PENTENS T-303
Moisture Barrier
Technical Data
Color (mixed) Grey
Mixing Ratio (by weight) Comp A:B = 10 :25
Pot Life (25°C) 30 minutes
Mixed Density 2.0kg per liter
Bond Strength on Concrete 15 kgf/cm2
(sandblasted)
Elongation 30%
Index of Resistance
To Diffusion of Water Vapor (μH2O): 850
To Diffusion of Carbon Dioxide (μCO2): 34000
Water Absorption Cosfficient A 0.03 kg/m2×h0.5
Permeability
Positive Water Pressure 15 bar
Negative Water Pressure 3 bar
Application Temperature (°C) 5 to 35
Service Temperature (°C) 5 to 50
Shelf Life 12 months in
unopened, original
containers
Storage Condition Store in a dry, cool
Auto F&B Chemical Factory Electronic
place
Packaging A: 10 kg/pail
B: 25 kg/bag
Substrate
4
PENTENS INDUSTRIAL FLOORING SOLUTIONS
MOISTURE BARRIER
PENTENS E-502
Epoxy Silica Mortar Floor
Technical Data
Form Liquid
Colour Transparent
Density (CNS 6986, CNS 6988) 1.08 kg /litre
Flexural Strength (N/mm2) 50
(ASTM C 580)
Tensile Strength (N/mm2) 30
(ASTM C307)
Elongation at Break (%) 9
(ASTM D638)
Compressive Strength > 90N/mm2
(ASTM C 579 : 93)
Abrasion Resistant CS-17 Less than 30 mg
(ASTM D 4060) weight loss after 1000
cycles of abrasion.
Tensile Adhesion (Pull-out-Strength) 3.5 N/mm2
(ASTM D 4541) Failure in concrete
Pot Life (30°C) 20 minutes
Shelf Life 1 year when
unopened and
Auto F&B Chemical Factory Electronic undamaged
Storage Condition Store in a dry, cool
place
Packaging
PENTENS E-502 is a two-component mortar consisting • E-502 A 20 kg/pail
of modified epoxy resin mixed with pigments • E-502 B 5 kg/pail
(A-Comp.), polyamine hardener (B-Comp.) and graded
aggregates.
Substrate
5
COATING
PENTENS E-620
Water-based Epoxy Coating
Technical Data
Form Liquid
Appearance Matte
Pot Life 45~60 minutes @25°C
Re-coat Time 2 hours @25°C and
50% RH
Water Vapour Barrier 0.12g/24 hrs/M²mmhg
Permeance @32°C and 50% RH
Application of 24 hours @ 25°C and
Adhesive/Coverings 50% RH
Full Cure 5~7 days @ 25°C and
50% RH
Specific Gravity (mixed) Approx. 1.25 @ 25°C
and 50% RH
Dry Film Thickness 300 μm (microns)
Shelf Life 1 year when unopened
& undamaged
Storage Store between
10°C to 30°C away
from direct sunlight
Packaging
F&B Chemical Factory Electronic
• E-620A 20 kg/pail
• E-620B 2 kg/pail
Substrate
6
PENTENS INDUSTRIAL FLOORING SOLUTIONS
COATING
PENTENS E-603
High Performance Epoxy Floor Coating
Technical Data
@20°C @34°C
Pot Life 40 mins 30 mins
Tack Free Time 3~4 hrs 2~3 hrs
Time Between Coats 12~16 hrs 8~12 hrs
Initial Hardness 24 hrs 18 hrs
Full Cure 7 days 5 days
Dry Film Thickness 0.3mm (approx)
(include primer)
Abrasive Test (g) – 0.042
Taber CS-17, 1000g,
1000 Cycles (ASTM C501)
Storage Store in a dry, cool place
Shelf Life 1 year when unopened and
undamaged.
Packaging
• E-603A 4 kg/pail & 20 kg/pail
• E-603B 1 kg/pail & 5 kg/pail
Consumption 0.3kg/m²/2 coats
Chemical Resistance No objectionable alteration
(ASTM D1308-02(2007) in the surface
Sea Water
Distilled Water
F&B Chemical Factory Electronic
Substrate
7
EPOXY MORTAR SCREEDS
PENTENS E-502
Epoxy Silica Mortar Floor
Technical Data
Form Liquid
Colour Transparent
Density (CNS 6986, CNS 6988) 1.08 kg /litre
Flexural Strength (N/mm2) 50
(ASTM C 580)
Tensile Strength (N/mm2) 30
(ASTM C307)
Elongation at Break (%) 9
(ASTM D638)
Compressive Strength > 90N/mm2
(ASTM C 579 : 93)
Abrasion Resistant CS-17 Less than 30 mg
(ASTM D 4060) weight loss after 1000
cycles of abrasion.
Tensile Adhesion (Pull-out-Strength) 3.5 N/mm2
(ASTM D 4541) Failure in concrete
Pot Life (30°C) 20 minutes
Shelf Life 1 year when
unopened and
Auto F&B Chemical Factory Electronic undamaged
Storage Condition Store in a dry, cool
place
PENTENS E-502 is a two-component mortar consisting Packaging
• E-502 A 20 kg/pail
of modified epoxy resin mixed with pigments
• E-502 B 5 kg/pail
(A-Comp.), polyamine hardener (B-Comp.) and graded
aggregates.
Substrate
8
PENTENS INDUSTRIAL FLOORING SOLUTIONS
FLOOR HARDENER
PENTENS TOP 1
Non-metallic Floor Hardener
Technical Data
Form Powder
Colour Natural, red brown,
light green and dark
green
Mohs Scale Hardness 6
(BS EN 15771:2010)
Compressive Strength (N/mm2) 80
Abrasion Resistance <266.3
(ASTM D4060-14)
Weight Loss after
1000 cycles (mg)
Typical Coverage
Normal Traffic Area 4kg/m2
Heavy Traffic Area 5-6kg/m2
Application Temperature (°C) 10 to 40
Service Temperature (°C) -30 to 200
Flexural Strength (N/mm2) >15
Water Impermeability 20% less permeable
than untreated
concrete
Shelf Life 1 year when unopened
Storage Condition Store in a dry, cool place
Auto F&B Chemical Factory Packaging 25 kg/bag
• Parking lots
• Engineering workshops
• Warehouses
• Quays
• Service stations / factories
• Garages
• Jetties
• Loading bays
Substrate
9
CEMENTITIOUS
PENTENS T-303M
Water-based, Self-leveling Cementitious Mortar
Technical Data
Color (mixed) Cement grey
Mixing Ratio (by weight) Comp. A:B=2:5
Pot Life (25°C) 30 minutes
Mixed Density 2.0 kg per liter
Bond strength on concrete 20 kg/cm2
(sandblasted)
Initial Cure 12 hour
Full Cure 7 days
Coverage 2 kg/m2 @ 1mm
thickness
Application Temperature 5 ~ 35°C
Service Temperature 5 ~ 50°C
Shelf Life 12 months in
unopened original
containers
Storage Condition Store in a dry, cool
place
Packaging A: 10 kg/pail
B: 25 kg/bag
• Car park
• Warehouse
• Concrete slabs
• Cement screeds
• PVC tiles underlay
• Epoxy floor underlay
• Acrylic sports floor underlay
Substrate
10
PENTENS INDUSTRIAL FLOORING SOLUTIONS
POLYURETHANE
PENTENS PU FLOOR-MF
Self-smoothing Polyurethane Flooring
Technical Data
Solids 100%
No. of Components 3
Recommended Thickness 3 to 6mm
Theoretical Coverage 2 kg/m2/per mm
Pot Life 15 minutes @ 30°C
Drying Time Initial cure - 1 hour
Foot traffic - 6 hours
Full cure - 24 hours
Compressive Strength 50 N/mm2
Flexural Strength 18 N/mm2
Tensile Strength 10 N/mm2
Hardness (Shore D) 75
Elongation 2.9%
Water Absorption 0%
Abrasion Resistance (Taber) 99.2 mg / 1000 cycle
Application Temperature 5°C to 45°C
Packaging Part-A: 3 kg/pail
Total 20kg/set Part-B: 3 kg/pail
Part-C: 14 kg/pail
Chemical Factory Electronic
Substrate
11
POLYURETHANE
PENTENS PU FLOOR-HD
Heavy Duty Polyurethane Flooring
Technical Data
Solids 100%
No. of Components 4
Recommended Thickness 9 to 12mm
Theoretical Coverage 2.50 kg/m2/per mm
Pot Life 10 minutes @ 30°C
Drying Time Initial cure - 1 hour
Foot traffic - 6 hours
Full cure - 24 hours
Compressive Strength >50 N/mm2
Flexural Strength 18 N/mm2
Tensile Strength 10 N/mm2
Hardness (Shore D) 75
Elongation 2.9%
Water Absorption 0%
Abrasion Resistance (Taber) 0.039 g / 1000 cycle
Application Temperature 5°C to 45°C
Packaging Part-A: 3 kg/pail
Total 32kg/set Part-B: 3 kg/pail
Part-C: 14 kg/pail
Substrate
12
PENTENS INDUSTRIAL FLOORING SOLUTIONS
SELF-LEVELING
PENTENS E-601
Epoxy Self-leveling Floor Systems
Technical Data
Form Liquid
Specific Gravity 1.7
Flexural Strength (ASTM C 580) 32 N/mm2
Tensile Strength (ASTM C 307) 40 N/mm2
Elongation at Break 9%
(ASTM D 638)
Compressive Strength >75 N/mm2
(ASTM C 579 : 93)
Abrasion Resistance CS-17 10 mg weight loss
(ASTM D 4060) after 1000 cycles of
abrasion.
Tensile Adhesion (Pull-out- 3.5 N/mm2
Strength) (ASTM D 4541) Failure in concrete
Pot Life (25°C) 20 minutes
Consumption 4-6 kg/m2
Shelf Life & Storage Condition 1 year at dry, cool place
Packaging
• E-601A 20 kg/pail
• E-601B 5 kg/pail
F&B Chemical Factory Electronic
PENTENS E-601 is a two-component self-leveling epoxy coating system consisting of modified epoxy resin
mixed with pigments (A-Comp.) and polyamine hardener (B-Comp.).
PENTENS E-601 is a high-build coating system that apply typically in 2mm thick. The glossy, easy-to-maintain
surface resists dirt and chemical penetration while enhancing the appearance and light reflection in your facility.
Substrate
13
ANTI-SLIP
Chemical Resistance
Water (20°C) Excellent
Machine Oil (20°C) Excellent
Heavy Duty Oil (20°C) Excellent
H2SO4 (5%) Good
HCI (5%) Good
Acetic Acid (5%) Good
NaOH (5%) Excellent
Solvent (95%) Good
Petrol Excellent
Area of Uses
Ideally suitable for use in:
• Dairies
• Soft drink/Food process units
• Chemical manufacturing units
• Passage ways
• Oil refineries
• Parking areas
Substrate
14
PENTENS INDUSTRIAL FLOORING SOLUTIONS
ANTI-SLIP
Technical Data
@20°C @34°C
Pot Life 3 hrs 1 hrs
Tack Free Time 3~4 hrs 2~3 hrs
Time Between Coats 4~24 hrs 3~16 hrs
Initial Hardness 24 hrs 18 hrs
Full Cure 7 days 5 days
Dry Film Thickness 400 microns (approx)
Storage Store in a dry, cool place
Shelf Life 1 year when unopened and
undamaged.
Packaging
• E-601A 20 kg/pail
• E-601B 5 kg/pail
Curing Time ~ Foot traffic after 8 hrs
Consumption 0.4~0.5 kg/m²
• M & E rooms
• Pharmaceutical and electronic industries
• Soft drink/food process units
• Chemical manufacturing units
• Passage ways
• Oil refineries
• Parking areas
Substrate
15
ANTI-STATIC
PENTENS E-601AS
Anti-static, Solvent Free, Self-leveling
Epoxy Top Coat Technical Data
Form Liquid
Specific Gravity 1.2±0.05 kg/l
Pot Life @ 25°C 40 minutes
Storage Condition Store in a dry, cool
place
Shelf Life 1 year when unopened
and undamaged
Packaging
• Component A: 20 kg/pail
• Component B: 5 kg/pail
PENTENS E-601AS is a self-leveling, anti-static, solvent-free epoxy floor coating. The cured floor exhibits excellent
antistatic properties and finishes to a smooth, seamless surface with an attractive appearance that can be easily
maintained in a hygienic condition.
• Electronic industries
• Wafer and PC component production
• Synthetic fiber mills
• Processing and handling of combustible goods
• Operating theatre and recovery rooms
Substrate
16
PENTENS INDUSTRIAL FLOORING SOLUTIONS
ANTI-STATIC
PENTENS E-603AS
Anti-static, Solvent-based, High
Performance Epoxy Coating Technical Data
Form Liquid
Specific Gravity 1.3±0.05 kg/l
Solid Content >70% by weight
Pot Life @ 25°C 40 minutes
Storage Condition Store in a dry, cool
place
Shelf Life 1 year when unopened
and undamaged
Packaging
• Component A: 20 kg/pail
• Component B: 10 kg/pail
PENTENS E-603AS is a self-smoothing anti-static, solvent type epoxy floor coating. The cured floor exhibits
excellent antistatic properties and finishes to a smooth, seamless surface with an attractive appearance that can
be easily maintained in a hygienic condition.
• Electronics industries
• Wafer and PC component production
• Synthetic fiber mills
• Processing and handling of combustible goods
• Operating theatre and recovery rooms
Substrate
17
ANTI-STATIC
PENTENS E-620AS
Anti-static Water-based Epoxy Coating
Technical Data
Form Liquid
Specific Gravity 1.3±0.05 kg/l
Solid Content >60% by weight
Pot Life @ 25°C 30 minutes
Flash Point 90°C
Foot Traffic Resistance 24 hours
Full Chemical and 7 days @ 20°C
Mechanical Resistance
Resistivity >1×104Ω to <1×106Ω
Application Temperature 10°C to 35°C
Service Temperature -10°C to 60°C
Storage Condition Store in a dry, cool
place
Shelf Life 1 year when unopened
and undamaged.
Packaging
• Component A 20 kg/pail
• Component B 4 kg/pail
PENTENS E-620AS is a water-based, twocomponent, anti-static epoxy coating for floors, walls and ceilings.
PENTENS E-620AS is easy to apply and exhibits excellent adhesion. When it is fully cured, PENTENS E-620AS
provides excellent mechanical and anti-static properties.
Substrate
18
PENTENS INDUSTRIAL FLOORING SOLUTIONS
DECORATIVE
PENTENS E-601
Epoxy Self-leveling Floor Systems
Technical Data
Form Liquid
Specific Gravity 1.7
Flexural Strength (ASTM C 580) 32 N/mm2
Tensile Strength (ASTM C 307) 40 N/mm2
Elongation at Break 9%
(ASTM D 638)
Compressive Strength >75 N/mm2
(ASTM C 579 : 93)
Abrasion Resistance CS-17 10 mg weight loss
(ASTM D 4060) after 1000 cycles of
abrasion.
Tensile Adhesion (Pull-out- 3.5 N/mm2
Strength) (ASTM D 4541) Failure in concrete
Pot Life (25°C) 20 minutes
Consumption 4-6 kg/m2
Shelf Life & Storage Condition 1 year at dry, cool place
Packaging
• E-601A 20 kg/pail
• E-601B 5 kg/pail
PENTENS E-601 is a two-component self-leveling epoxy coating system consisting of modified epoxy resin
mixed with pigments (A-Comp.) and polyamine hardener (B-Comp.).
PENTENS E-601 is a high-build coating system that apply typically in 2mm thick. The glossy, easy-to-maintain
surface resists dirt and chemical penetration while enhancing the appearance and light reflection in your facility.
Substrate
19
ATHLETIC
PENTENS T-250
Acrylic Rubberize Sport Floor Coating
(RC Substrate) Technical Data
Form Liquid
Color Blue, white, green,
yellow, red & etc.
Resin Acrylic
Solid Content >60% by weight
QUV Accelerated Weathering No cracking
Abrasion Resistance 15.7 mg/1000 cycles
(ASTM D4060-07)
Curing Time 12 hours
Application Temperature -10°C to 50°C
Shelf Life At least 1 year when
unopened and
undamaged
Storage Condition Store in dry, cool place
Packaging 20 kg/pail
5 kg/pail
Resin
Specific Gravity (25°C) 1.01 kg/litre
Particle Size 175 mm
Sport Running Butadiene Content 40%
Court Track
PENTENS T-250 is a specially formulated waterborne styrene-butadiene emulsion for both exterior and interior use.
As a decorative and protective finish, PENTENS T-250 has an outstanding durability. When applied correctly to a
suitable backing, it will neither flake nor peel. What makes PENTENS T-250 durable is an butadiene-based resin
and selected pigments to which are added mica and fine hard aggregates, to ensure long life. PENTENS T-250
also contains a biocide which combats bacterial and fungus growth. The surface texture can be controlled by using
various amount of fine-graded sand with low abrasive feature to effectively control player’s foot movement and offer
perfect ball bounce. PENTENS T-250 is certified by International Tennis Federation (ITF) for Court Pace category 2.
For RC substrate
20
PENTENS INDUSTRIAL FLOORING SOLUTIONS
ATHLETIC
PENTENS T-250
Acrylic Rubberize Sport Floor Coating
(AC Substrate) Technical Data
Form Liquid
Color Blue, white, green,
yellow, red & etc.
Resin Acrylic
Solid Content >60% by weight
QUV Accelerated Weathering No cracking
Abrasion Resistance 15.7 mg/1000 cycles
(ASTM D4060-07)
Curing Time 12 hours
Application Temperature -10°C to 50°C
Shelf Life At least 1 year when
unopened and
undamaged
Storage Condition Store in dry, cool place
Packaging 20 kg/pail
5 kg/pail
Resin
Specific Gravity (25°C) 1.01 kg/litre
Particle Size 175 mm
Sport Running Butadiene Content 40%
Court Track
PENTENS T-250 is a specially formulated waterborne styrene-butadiene emulsion for both exterior and interior use.
As a decorative and protective finish, PENTENS T-250 has an outstanding durability. When applied correctly to a
suitable backing, it will neither flake nor peel. What makes PENTENS T-250 durable is an butadiene-based resin
and selected pigments to which are added mica and fine hard aggregates, to ensure long life. PENTENS T-250
also contains a biocide which combats bacterial and fungus growth. The surface texture can be controlled by using
various amount of fine-graded sand with low abrasive feature to effectively control player’s foot movement and offer
perfect ball bounce. PENTENS T-250 is certified by International Tennis Federation (ITF) for Court Pace category 2.
AC Premix Base
For AC substrate
21
PROJECT REFERENCES
PB Square, Terengganu
Floorshield ID
Eaton Residence
Floorshield ID
22
PENTENS INDUSTRIAL FLOORING SOLUTIONS
MIEC, Langkawi
PU Floor
Tribeca
Anti Slip Epoxy
Equatorial Plaza
Floorshield ID
23
LEGEND Head Office Subsidiary Distribution Partner Manufacturing Plant