Professional Documents
Culture Documents
EXCELLENCE
COMPANY PRESENTATION CONTENT
Who we are?
Capabilities
Markets we serve
Products and services
Quality control
References and clients
WHO ARE WE!?
Maverick Valves Manufacturing HQ based in Tilburg,
The Netherlands is a dynamic and flexible
organization, established in 2008.
Office: 2.400 M2
Factory: 7000 M2
Warehouse: 3000 M2
Just in front of the highway in a
new development industrial area
at 5 minutes from Tilburg city
center easy to reach also with
public transportation.
FACILITIES AND OPERATIONS
SAWING & MACHINING
WAREHOUSE AND ASSEMBLY
WELDING & PAINTING
TESTING AND QUALITY CONTROL
MARKETS WE SERVE
Upstream to Downstream
Offshore to Onshore
FPSO, FLNG, FRSU
Oil & Gas
Water
Subsea
Chemical
Petrochemical
Energy
Process industry
Mining
MAVERICK VALVES PRODUCTS
Butterfly Valves
Ball valves
Gate valves
Globe valves
Check valves
Plug valves
Dual expanding plug valves (DBB)
Rising Stem Ball Valves (non-friction)
PIG launcher ball valves
Choke valves
Safety valves
Custom made/special applications Valves
Api 6A components
Multi selector valves
BUTTERFLY VALVES
VARIANTS
• Triple eccentric
• Double eccentric
• High performance
• Double block and bleed
• Jacketed
• Custom made
BALL VALVES
BALL VALVES
• Floating and Trunnion
• Top entry and side entry
• Double block and bleed
• Up to 56 Inch
• Max 15000PSi
• Soft seat and metal seat
• Conventional and rising stem
• 3-WAY and 4-WAY
• Pig launcher and receiver
• Control flow type
• Fully cladded and FBE lined
• Cryogenic and high temperature
• Manual and actuated
• HIPPS
• Subsea and topside
RISING STEM BALL VALVES
No friction
Bi-directional
Longer life spam
According client spec.
Easy in line maintenance
Used for dirty service (sand)
Metal to metal
Single seat (or dual seat) design
No thermal expansion problems
Self cleaning closing members
PIG VALVES
VARIANTS
• Cleaning Pigs without by-pass
• Cleaning Pigs , with integrate by-pass
• Separating Pigs
• Pig launcher-receiver
GATE VALVES
VARIANTS
• Through conduit
• Slab , expanding, dual
expanding and parallel slide
• Bolted bonnet and pressure
seal
• Soft and metal seated
• Subsea
• Fully cladded
• Cryogenic and high
temperature
CHECK VALVES
- Swing and Tilt
- Dual plate type
- Piston type
- Axial flow
- Sub sea
GLOBE VALVES
- Conventional , Y and
angle pattern
- Bellow seat
- Bolted bonnet and
pressure seal
- Cryogenic and high
temperature
- Piston type
- Sub sea
- Double seat
PLUG VALVES
Double block and bleed
Dual expanding
Lubricated and not lubricated
Jacketed plug
Bolted bonnet
Pressure balanced
Severe Applications
High pressure
High and low temperature
Low noise
Forged and casted
Full bore and regular pattern
DEPV SPECIAL FEATURES
DEPV
CHOKE VALVES
TYPES
• Positive
• Needle
• Plug / Cage type
• Rotating Disc
• MOV
- Casing head
- Casing spool
- Tubing head
- Tee and Cross
CUSTOM MADE VALVES
• 13-5/8’’ 15.000 PSI METAL TO METAL TRUNNION MOUNTED
COMPLETE WITH PSL3G HIGH PRESSURE GAS TESTING
• Fully compliance to API 6A
• Body A182 super duplex F55, Trim full Inconel 718 +TCC
• Total weight +/- 20.000 Kg
• End user : Petronas offshore (Malesia)
• 1-6-8-10” 900# floating ball valves with pneumatic actuator
• Body stainless steel, Trim stainless steel + CCC coating
• High operative temperature over 360 ⁰C
• Rate A according ISO 5208
• Destination Russia, end user Gazprom
• 48” 300# TRUNNION MOUNTED
• Fully compliance to API 6D
• Body A350 LF2 , trim fully cladded in INC625 + ENP
• Project : North Stream phase 2
Some more projects we have done for special valves
REFERENCE SALT REFINING COMPANY
VALVES IN VERY FAST TRACK AND FOR EMERGENCY
Some projects we have done with very short lead time
PRODUCT ANALYSIS
• FEA analysis
• CFD analysis
• VALVE CFD study
• VALVE FEA study
• ANSYS temperature simulation
• CV calculation
• SIL calculation
• Earthquake resistance design
SPECIAL TESTING
Capability to perform special tests in-house:
Fire safe test
According API 607, API 6FA, API 6FB, API 6FC, API 6FD, ISO 10497 and IEC 60584-2.
Low temperature / cryogenic test
According ISO 1626, NEN 12266-1, MESC 77-200, MESC 77-209, BS6364.
Fugitive emission test
According ISO 15848-1, ISO 15848-2, MESC 77-312, TA luft.
Torque test
According requirements or customer specification.
API 6A/ API 17D
PR2, PSL1, PSL2, PSL3, PSL3G
Type Acceptance Testing (TAT)
MESC 77-300
Customer specification test
All mentioned tests can also be performed
according customer specifications
ADDICTIONAL TEST AND INSPECTION
• MT (Magnetic Particle Examination)
• UT (Ultrasonic Examination)
• PT (Dye Penetrant Examination)
• PMI (Positive Material Identification)
• Hardness Testing
• Ferrite Testing
• Third level ISO 9712 for VT MT PT UT RT LT (in-house)
• NACE and FROSIO Lv.2 inspector in house
• CSWIP 3.1 welding inspector in house
CLIENTS
JUST CHALLENGE US