Professional Documents
Culture Documents
Shorter slab to slab cycle for reducing an average 7cm of Post Tension slab
slab due to the less time slab thickness & 80 Kg/m3 Construction proceed like
needed for installation and ordinary steel leads to a ordinary cast in place RC
slab de-shuttering 5 days saving of an average of 30 slab, which allows the
after pouring, which allows SR/m2 rather than the designer to make any MEP
the partitions and MEP usage of 1 set of formwork or architectural provisions
discipline to start earlier. and less labor intensity. prior or after slab pouring.
ADVANTAGES & BENEFITS
Case Study #1
Our case study consists of a 25 levels tower located in Jeddah, the total Built Up Area is 18,400
m2, Original design adopts reinforced concrete 28 cm thick flat slabs, having a reinforcement
ratio 164 Kg/m3, converting to post tension slabs leads to 19cm thick flat slab with a
reinforcement ratio of 75 Kg/m3, which results a total saving 750,000 SR (41 SR/m2) due to
the following savings:
1- 1,615 m3 of concrete with a cost of 340,000 SR (18 SR/m2).
2- 579 Tons of steel with a cost of 1,260,000 SR (69 SR/m2).
3- Cost of post tension works is 840,000 SR (46 SR/m2).
Steel 844 Tons 265 Tons 579 Tons 2,175 SR/Ton 1,259,325 SR 68 SR/m2