Professional Documents
Culture Documents
CERTIFICATIONS
2 888.349.2950 | www.airplaco.com
PumpMaster PG-35
•
10 yards per hour
Swing tube valve
• Self-propelled
for grouting and shotcrete. Pump masonry
grout, mortar, pea gravel, shotcrete and more • Optional wireless
to the exact point where needed, easily and remote
efficiently. Compact and powerful, this 35 HP
Optional skid mount or
work-saver fits on the job site and empties a
PG-25
The Pumpmaster PG-25 features the
exclusive AIRPLACO hydraulic drive
train. The self-propelled movement
is designed for easy mobility in tight
spaces on the job site.
• Variable speed
PG-10
The Pumpmaster PG-10 grout pump is
powered by your existing hydraulic power
source and is designed to perform from one
job to the next with low maintenance.
4 888.349.2950 | www.airplaco.com
PumpMaster MJ-16
Features:
•
•
Variable speed
On-board air compressor
Plaster pump
The SprayMaster SM-78 is the complete solution for
• Rotor/stator pump continuous spraying or pumping utilizing pre-blended,
lightweight and cementitious products. The SM-78G is
designed for fireproofing, underlayments, stucco, manhole
Wet Mix Equipment
6 888.349.2950 | www.airplaco.com
Pro-Cretor PC-3
Features:
• 10 cubic-foot mixer
• Swing tube material valve
• Proxy-switch technology
8 888.349.2950 | www.airplaco.com
Handy-Grout HG-9
Features:
• 8 gallon hopper
• Variable volume & pressure
• Ball-check manifold
gauge and wide hopper for easy pouring. Model HGA-530 features:
• 30 gal. mixer
• Skid or wheel mount
• 5 HP air motor
• HGA-50 pump
10 888.349.2950 | www.airplaco.com
Financing Available
Maximum output and pressure cannot be reached simultaneously. Performance will vary depending on the operator, cycle rate, mix design
and placement line.
12 888.349.2950 | www.airplaco.com
C-10SL & C-10HHD
Features:
• 9 hp air motor w/ gear drive
• Six-point pad holding
• External lubrication access
• Hinged hopper
Features:
• Multi-vane 5 hp air motor
• Continuous feed hopper
• Exhaust suppression
chamber
• Six-point pad holding
system
14 888.349.2950 | www.airplaco.com
Dry-Mix Batch Plants
& Pre-Dampener
Model Comparison
Features:
Dry-mix gunite batch plant • 30 hp diesel engine
The Mix-Elvator 634 is a medium to high production gunite • Self-contained rig
batch plant used for sand and cement proportioning, mixing
• Heavy-duty mix auger
and conveying of dry gunite and refractory materials.
Combined with a rotary gunite machine, the Mix-Elvator • All hydraulic
becomes a self-contained rig — eliminating the need for proportioning system
ready-mix deliveries. This high production batch plant
Dry Mix Equipment
• Automatic material
saves an enormous amount of time and money for gunite
contractors.
proportioning
• Heavy-duty
hydraulic drive
16 888.349.2950 | www.airplaco.com
914MBT & 914MB
Features:
• Automatic material
proportioning
• Heavy-duty
hydraulic drive
Features:
• Simplified design
• Improves material compaction
• Easy-to-clean
•
•
Reduces dust
Reduces static
Dry-mix gunite material delivery
The Pre-Dampener is designed for on-site pre-dampening of dry-gunite
electricity
Dry Mix Equipment
18 888.349.2950 | www.airplaco.com
Financing Available
Standard Program:
• Flexible terms to accommodate most budgets
• Terms available from 24–60 months
• Simple, 1 page application for loans up to $150,000
• Four hour turnaround on most credit applications
Deferred Program:
• No payments for up to four months
• Terms available from 24–60 months
Seasonal Program:
• Pick three months out of each year of the term
and skip payments each year during those months
• Helps manage payments during slow periods
• Terms available from 24–60 months
If you don’t see the product you are looking for or if you need technical expertise to pick the right
part/accessory call one of our professionals for expert advice. We ship worldwide and have three
domestic warehouse locations to pick up from.
20 888.349.2950 | www.airplaco.com
Wet Mix Nozzles
7404052 2 HD
7404054 2 1/2 HD
7404056 3 HD
7404058 4 HD
CLAMPS-HD ID (in) Gasket
7501108 2 in 7501123
7501120 2 1/2 in 7501128
7501109 3 in 7501129
7501084 4 in 7501124 CAMLOCK SETS ID (in) PSI
707797 1 250
22 888.349.2950 | www.airplaco.com
SHOTCRETE NOZZLES CONCRETE/SHOTCRETE HOSE, FABRIC-REINFORCED
HEAVY DUTY 1 1/2 in 2 in 2 1/2 in GROOVED ID Length Weight PSI
Nozzle Assy 709556 709512 709525 701289 1 1/2 in 25 ft 38 lb 500
Air Ring Nipple 709557 709510 709526 701290 1 1/2 in 50 ft 67 lb 500
Nozzle Body 709293 709268 709274 701291 2 in 25 ft 48 lb 500
O-Ring 9531075 7901132 7901144 701294 2 in 50 ft 83 lb 500
VICTAULIC 1 1/2 in 2 in 2 1/2 in 701297 2 1/2 in 25 ft 61 lb 500
Nozzle Assy 709303 709269 709275 701300 2 1/2 in 50 ft 107 lb 500
Air Ring Nipple 709292 709266 709272 Grooved ends should be limited to 500 PSI applications.
Nozzle Body 709293 709268 709274 RAISED HD ID Length Weight PSI
O-Ring 9531075 7901132 7901144 701292 2 in 25 ft 48 lb 800
NOZZLE TIPS 1 1/2 in 2 in 2 1/2 in 701295 2 in 50 ft 83 lb 800
Rubber, Long 7602088 701298 2 1/2 in 25 ft 61 lb 700
Rubber, Short 7602119 701301 2 1/2 in 50 ft 107 lb 700
Poly 7602093 7602085 7602086 701304 3 in 10 ft 43 lb 500
Poly 709041 709042 701307 3 in 12 1/2 ft 45 lb 500
NOZZLE PLUMBING 1 1/2 in 2 in 2 1/2 in 701310 3 in 25 ft 74 lb 500
Clamp 7501131 7501079 7501080 701322 4 in 10 ft 52 lb 500
Elbow 9423002G 8423004 8423004 701325 4 in 12 1/2 ft 60 lb 500
Valve 7203148 7203051 7203051 701328 4 in 25 ft 97 lb 500
Air King Coupling 7504155 650116 7504029 GROUT HOSE, FABRIC-REINFORCED
Large Thumb Screw 8097069 8097069 8097069 M x M IPT ID Length Weight PSI
701350 1 in 25 ft 21 lb 250
701351 1 in 50 ft 37 lb 250
CLAMPS 701352
701358
1 1/4 in
1 1/4 in
25 ft
50 ft
24 lb
42 lb
800
800
ID (in) End Weight (lb) Gasket
7501063 1 1/2 Grooved 1.3 7501067 701354 1 1/2 in 25 ft 38 lb 800
7501160 1 1/2 Heavy-Duty 2 7501127 701355 1 1/2 in 50 ft 67 lb 800
7501108 2 Heavy-Duty 4.75 7501123 701570 2 in 5 ft 12 lb 800
7501054 2 Grooved 2.4 7501058 701571 2 in 10 ft 22 lb 800
7501120 2 1/2 Heavy-Duty 5 7501128 701356 2 in 25 ft 48 lb 800
7501055 2 1/2 Grooved 2.8 7501059 701357 2 in 50 ft 83 lb 800
7501109 3 Heavy-Duty 8.5 7501129 RED, URETHANE
7501056 3 Grooved 3.5 7501060 F x F NPT ID Length Weight PSI
645185 1 in 10 ft 7 lb 200
7501084 4 Heavy-Duty 11 7501124
701743 1 in 15 ft 11 lb 200
7501057 4 Grooved 9.8 7501061
701591 1 in 25 ft 18 lb 200
7501110 5 Heavy-Duty 13.75 7501125
701836 1 in 50 ft 32 lb 200
7501064 5 Grooved 12.8 7501066
7501087 6 Heavy-Duty 16 7501126
7501086 6 Grooved 13.3 7501065
AIR/WATER HOSE
Size Style PSI
CAMLOCKS 7511002
7513003
1/4 in
1/4 in
Red
Yellow
200
500
Size Coupling PSI
7511005 3/8 in Red 200
9404005 1 in Nipple 250
7513001 3/8 in Yellow 500
7503002 1 in MxF 250
7511007 1/2 in Red 200
Detailed Specs
7503138 1 in FxF 250
7513002 1/2 in Yellow 500
1570660 1 1/4 in x 1 in Nipple 250
7511008 5/8 in Red 200
9404006 1 1/4 in Nipple 250
7513011 5/8 in Yellow 300
7503068 1 1/4 in MxF 250
7511009 3/4 in Red 250
7503061 1 1/4 in FxF 250
7511026 3/4 in Yellow 250
9404007 1 1/2 in Nipple 700
7511010 1 in Red 200
7503173 1 1/2 in MxF 700
7513023 1 in Yellow 500
7503174 1 1/2 in FxF 700
7513025 1 1/4 in Red 300
9404008 2 in Nipple 700
7513027 1 1/4 in Yellow 500
647490 2 in MxF 700
7511012 1 1/2 in Red 200
647493 2 in FxF 700
7537003 1 1/2 in Yellow 500
24 888.349.2950 | www.airplaco.com
Dry Mix Hoses
and Couplings
Don’t see the part you need?
Visit us at www.airplaco.com or call us 1.888.349.2950
PartsDescription
WATER HOSE ID (in) Length Cplg
709504 3/4 50 ft GHT & Accessories
AGITATOR STUB
705867
& Accessories
PartsDescription
26 888.349.2950 | www.airplaco.com
Gunite Machine Parts
BAG BREAKER
705531
PartsDescription
FEED BOWL Production Pockets
705041 High Square & Accessories
HOSE COUPLINGS — COUPLINGS/NUT * Mesa Black/White Stripe Refractory Hose w/ Dual Copper Static Wire.
28 888.349.2950 | www.airplaco.com
PARTS & ACCESSORIES: Lova/Sova PARTS & ACCESSORIES: AG-15
GS REED Description GS PUTZ Description
705315 10005 Felt Seal 705453 15-001 Wear Plate, 1 in, 15-pocket
705634 10013 Rock Shear 705454 15-002 Wear Plate, 2 in, 15-pocket
7460005 10046 Gooseneck, 2 in, Straight 705579 15-003 Felt Seal
900052 10063 Drive Gear 705532 15-008 Hopper Screen
7460006 10065 Clamp, Pad Rubber 705202 15-009 Wear Pad
705422 10246 Air Hose Assembly 705412 15-014 Agitator Assembly
705455 10336 Wear Pad w/ Lip 705363 15-023 Wear Pad Clamp
705006 10338 Wear Pad 705229 15-029 Rock Breaker
705383 10339 Wear Pad w/ Lip 705094 15-036 Gooseneck Plate
7202051 10600 Air Motor, 8NR substitute only, use w/ 705097 Liner and 705093 Gooseneck
7202064 10602 Air Motor Vane, 16NR 709509 15-039 Gooseneck Liner, 2 in
7202140 10604 Air Motor Vane, 8NR 705444 15-040 Feed Bowl, 15-pocket
7202076 10605 Air Motor Repair Kit, 8NR 7210061 70-102 Lubricator, 1 in Air-Line
7202141 10606 Air Motor Repair Kit, 16NR 7210062 70-103 Filter, 1 in Air-Line
900062 10702 Mainshaft Bearing, Top 705404 15-095 Feed Bowl, 15-pocket, Flex-lite
900059 10703 Mainshaft Housing
900061 10704 Mainshaft Bearing,Lower
900063 10705 Mainshaft Housing Gasket HOSE COUPLINGS
7460010 10716 Bearing, Needle, 5/8 in 2 P.C. BRASS
7460011 10717 Washer, Thrust, Thick Hose ID GS PUTZ
7460012 10718 Washer, Thrust, Thin 1 in 7423028 23-700
7460013 10723 Bearing, Needle, 3/4 in 1 1/4 in 7423031 23-702
705330 10728 Spindle Stud 1 1/2 in 7423032 23-703
7460015 10736 Lock Washer for Spindle 1 5/8 in 7423033 23-704
7460016 10737 Lock Nut for Spindle 3 P.C. ALUM.
705523 10796 Wear Plate, 12-pocket, Premium Hose ID GS PUTZ
705239 10800 Wear Plate, 15-pocket, Premium 2 in 709020 23-866
705327 10800-1 Feed Bowl, 15-pocket, (Flex-lite)
705253 10801 Feed Bowl, 15-pocket, (Steel)
7460018 10802 Wear Plate, 15-pocket HAMM NOZZLE PARTS
7460019 10805 Wear Plate, 20-pocket GS PUTZ
705382 10807 Wear Plate, 21-pocket 709305 23-569 3/4 in Hamm Nozzle Tip
7460021 10825 Bowl Shim, 3/16 in 709033 23-571 1 in Hamm Nozzle Tip
7460022 10826 Bowl Shim, 5/16 in 709034 23-573 1 1/4 in Hamm Nozzle Tip
7460023 10827 Bowl Shim, 3/32 in 709035 23-575 1 1/2 in Hamm Nozzle Tip
7460025 10954 Backup Plate 7602105 23-700 3/4 in Hamm Nozzle Liner
705541 10958 Gooseneck Liner, 2 in Straight 7601063 23-574 1 1/4 in Hamm Nozzle Liner
7460026 10959 Gooseneck Liner, 1 1/2 in Straight 7601064 23-576 1 1/2 in Hamm Nozzle Liner
7460027 11012 Coupling Assembly, 1 1/2 in 7602069 23-578 1 5/8 in Hamm Nozzle Liner
7460031 12032 Nozzle Tip 7602103 23-572 1 in Hamm Nozzle Liner
7602113 12044 Nozzle Liner, 2 in 7602062 23-554 1 1/4 in Back Up Washer
7460037 12073 Backup Washer 7602061 23-557 1 1/2 in Back-up Washer
7460038 12074 Backup Washer 7602104 23-551 1 in Backup Washer
705363 20072 Pad Clamp 709250 23-617 Pipe Adaptor Male
709304 23-618 Pipe Adaptor Female
Detailed Specs
705416 N/A Wear Plate, 16-pocket, Premium
705418 N/A Feed Bowl, 16-pocket, Flex (green) 709263 23-590 Double Bubble Tip Adaptor
705096 20098 Feed Bowl, 16-pocket 709078 23-553 1 1/4 in Brass Water Ring
705241 20090 Wear Pad 709079 23-556 1 1/2 in Brass Water Ring
705294 20158 Felt Seal
7602057 40830 Nozzle Liner, 2 in
709010 40840 Nozzle Body w/ Plug
709017 40850 Water Ring, 2 in
709275 40860 Nozzle, 2 1/2 in Shotcrete Assembly
7460046 60001 Gooseneck, 2 in
705097 60007 Gooseneck Liner, 2 in
705349 60008 Gooseneck Liner, 1 1/2 in
7460047 60013 Gooseneck Plate, 2 in
705314 60052 Felt Seal
705329 90232 Stud Spindle
30 888.349.2950 | www.airplaco.com
Finishing Tools
PartsDescription
7401084 24 Straight Round
7401085 30 Straight Round
& Accessories
FRESNOS 2 1/2
Size (in) Blade Corners
7401105 24 Curved Square
7401106 24 Straight Square
32 888.349.2950 | www.airplaco.com
Airplaco Powder Monkey
Features:
• Rugged and portable
• Material fill valve
• Valve control arm
• Air pressure vent valve
• Pressure regulator
• Material flow valve
• Multi-position discharge
Powder Monkey
The Powder Monkey is the mining industry solution for loading
AN-FO Loaders
AN-FO (Ammonium Nitrate and Fuel Oil) into horizontal or
vertical bore holes in the mining surface. Simplified operator
controls and heavy-duty pressure vessel construction keep the
Powder Monkey working in the toughest conditions.