Professional Documents
Culture Documents
1 . Overview
Install Uninstall
▲Up Inverter side Inverter side
Inverter side Inverter side
(1)Front panel (2)Touch button (3)LCD screen (4)LED indicator (5)Mounting bracket
(6)Heat sink (7)DC switch (8)PV terminal (9)Battery terminal (10)COM port
(11)USB port (12)Vent valve (13)AC terminal
3 . Electrical connection
Please prepare the cable before connecting as follows.
Note: No. Cable name Type Recommend model
Note:
1.This document is for quick installation guidance only, please refer to User Manual for more details. Protective Single multi-core
1 6mm²-10mm² 1.Please make sure all switches are in “OFF”
2.Growatt shall not be liable for any damage resulting from unproper installation. grounding wire yellow-green wire
position before wiring. For personal safety,
Two or three polychromatic
2 AC output wire 6mm²-10mm² please do not operate with electricity.
multi-core copper wires
2.If the diameter of the cable does not match
3 PV input wire PV wire 4mm²-6mm² the terminal, or the cable is aluminum wire,
4 4mm²-6mm² please contact our after-sales personnel.
2 . Installation
RS485 /
4mm ² - 6mm ²
4mm ² - 6mm ²
Negative metal terminal
Negative metal terminal
Please make sure the cable can not be Pull the PV/BAT cable make sure there
pulled out after pressing. is no loose or shaking.
Red Fault