Professional Documents
Culture Documents
,Ltd
杭 州 知 一 通 信 有 限 公 司
CONTENTS
Feature:
* Size:440mm(L)*300mm(W)*44mm(H)
* 1U rack-mounted device
* 1 USB interface.
* 8 or16 GPON ports, each GPON port supports the splitting ratio of 1:128
* 4 uplink COMBO ports, 4 uplink optical ports
* 2 uplink 10-gigabit optical ports.
* support 1024 or 2048 GPON terminals accessing.
* power supply of 220VAC / -48VDC, support dual
* power redundancy configuration.
* QOS Guarantee
* Easy-to-Use Management System
EPON OLT
SL 1208S & 1216S EPON OLT
8 port or 16port Epon OLT is 1U high 19 inch rack mount product. The features of the OLT are small,
convenient, flexible, easy to deploy, high performance. It is appropriate to deploy in an compact room
environment. The OLT can use for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. It is
a high performance products.
Feature:
* Size: 440mm (L)*362mm (W)*44mm (H)
* Supply 8 or 16 Epon port
*1 USB interface, convenient & flexible, easy to deploy.
*Two uplink 10Gbps SFP slots.
*Four uplink GE optical SFP ports.
*Four uplink GE RJ45 copper ports.
*Double 220VAC or -48VDC redundancy power supply.
ZTE OLT
ZTE ZXA10 C320 is a small size, full-service optical access convergent platform and provides carrier-class
QoS and reliable network to meet the requirements for small-scale implementation of FTTx
services.Support xPON access and smooth evolution. ZXA10 C320 allows connect up to 4096 ONT/ONU
with power consuption less then 200W.
2*SMXA/1
1G OLT 1G Main Control Board
(control, GE uplink, DC power 3 in 1 card)
MA5683T OLT
Huawei MA5683T is a aggregation Optical Line Terminal (OLT), it supports up to 6 service slots and can
support maximum 12,000 subscribers (GPON). MA5683T has GICF/X2CS Uplink Board available for
selection, and two power slot redundancy for DC power input. Besides that, Thunder-link.com also offers
more bundle line, to meet your different requirement on various scenario. In addition, Thunder-link.com
provides self configuration page, where you can configure your own MA5683T by selecting boards and
items yourself. With our professional technical support to rich your experience.
MA5800 x15 ( X7, X17….) OLT
The industry's first 40 Gbit/s-capacity Next-Generation Optical Line Terminal (NG-OLT). Huawei's SmartAX
MA5800 multiple-service access module employs a distributed architecture to support ultra-broadband,
Fixed Mobile Convergence (FMC) services, and smart capabilities, such as SDN-based virtualization.
MA5800's programmable Network Processor (NP) chip set accelerates the roll-out of new services,
catering to the demand for differentiated services, including partitioning of wholesale and retail service
providers
Indicator
11 U (height), 21 inch 11 U (height), 19 inch 6 U (height), 19 inch
(width) (width) (width)
CATV ONU
The ONU is mainly designed for FTTH, FTTO application & is fiber to the home multi service accessing
Optical Network Unit. It based on the mature, stable, high cost performance GPON technology and has
gigabit Ethernet switching, WDM and HFC technology . It supports 1000Base-PX20+ standard with 1:64
maximum optical splitting ratio and 20km distance. It works together with OLT could realize flexible
network structure and maintenance and provides total FTTx solutions.
The CATV GPON ONU only needs one-core fiber to transmit data and CATV service & can integration
wireless function with meet 802.11 n/b/g technical standards, It has built-in high gain directional
antenna, the wireless transmission rate up to 300Mbps. It has the characteristics of strong penetrating
power and wide coverage. It can provide users with more efficient data transmission security.
SL 201GT-AGC
( 1GE+CATV Dual Mode )
Feature:
* Prevent Rogue ONU and Powerful Firewall
* Special Cabinet, Dimension : 100mm(L)×92mm(W)×30mm(H)
* 1 XPON port,Meet ITU-TG.984.x standards
* 1* 10/100/1000M auto-negotiation
* Support CATV Management
* AGC range: 0~-15dBm
SL 702XW-AGC
( 1GE+1FE+WiFi +CATV )
Feature:
* 1 GPON port, FSAN G.984.2 standard, Class B+
* 1* 10/100/1000M and 1* 10/100M auto-negotiation
* 1 RF interface
* AGC Control , RF output 78dBuV (@-12~-2dBm@85MHz)
* 2 antennas of WiFi 2.4GHz .
* 12V DC Power supply
* Dimension : 160mm(L)*139.5mm(W)*28.5mm(H)
* Support software online upgrading
* EMS network management based on SNMP ,convenient for maintenance
The ONU can integration wireless function with meet 802.11 n/b/g technical standards, It has 2 Pcsof
external high gain directional antenna, the wireless transmission rate up to 300Mbps. It has
thecharacteristics of strong penetrating power and wide coverage. It provide users with more
efficientdata transmission security.
SL 201G
SL 512XW
( 1GE+1FE+WiFi )
Feature:
* 1 GPON port, FSAN G.984.2 standard, Class B+
* 1* 10/100/1000M and 1* 10/100M auto-negotiation
* 2 antennas of WiFi 2.4GHz .
* 12V DC Power supply
* Dimension : 125mm(L) x80mm(W) x 28mm (H)
* Support software online upgrading
* Support DHCP/Static/PPPOE internet mode.
* EMS network management based on SNMP ,convenient for maintenance
* Compatible with OLT of brands Huawei, ZTE and Fiberhome.
SL 504XW
( 1GE+3FE+WiFi )
Feature:
* 1 GPON port, FSAN G.984.2 standard, Class B+
* 1* 10/100/1000M and 3* 10/100M auto-negotiation
* 2 antennas of WiFi 2.4GHz .
* 12V DC Power supply
* Dimension : 125mm(L) x80mm(W) x 28mm (H)
* Support ONU auto-discovery/Link *detection/remote upgrade of software.
* Support DHCP/Static/PPPOE internet mode.
* Support VLAN tag/untag.
* EMS network management based on SNMP ,convenient for maintenance
HS8545M5
Feature:
* Full compatible with ITU-T G.984.
* Dimensions :260mm x 140mm x 40mm(W×D×H)
* 1*GPON interface,uplink 1.25Gbps,downlink 2.5Gbps
* 1*GE & 3*FE auto adaptive Ethernet interfaces
* 1* VoIP ports
* Support USB port
* 2 antennas for WiFi
* 12V DC Power supply.
HS8546M
Feature:
* Dimensions : 143mm×115mm×30mm(W×D×H)
* 1*GPON interface,uplink 1.25Gbps,downlink 2.5Gbps
* 1*GE & 3*FE auto adaptive Ethernet interfaces
* 1* VoIP ports
* Support USB port
* Wifi supply
* 12V DC Power supply
ZTE ONU
F660 ONU
Feature:
* ITU-T G.984/G.988 GPON standards
* Dimensions : 220mmx160mmx44mm(W×D×H)
* 1*GPON interface,uplink 1.25Gbps,downlink 2.5Gbps
* 1*GE & 3*FE auto adaptive Ethernet interfaces
* 1* VoIP ports
* Support USB port
* 2 antennas for WiFi 2.4Ghz
* 12V DC Power supply.
EOC MASTER
EOC SML7934-R1 All-In-One (ONU+OR+2*EOC)
The EOC master All-In-One product is designed to provide Internet Service to subscriber’s home
through the existing coaxial access network. With EPON/GPON, EOC and HFC technology , the All-In-
One product meets the CATV broadcasting, VOD and Internet Service requirement of cable operators
for FTTB/FTTC. It build with EPON/GPON ONU, EOC master and Optical Receiver module in one
housing.
Feature
* 1 EPON ONU module
* 2 HomePlug AV EOC Master modules
* 1 HFC Optical Receiver
* Available with WDM inside or not
* RF output configurations with 2 or 4 outputs
* Line Power (from 90 to 264 VAC) or Cable Line Power (60VAC) optional
* 35/47, 42/54, 65/87 type High/Low Filter optional to meet your network
* Supports higher RF output: 112dBuv
* AGC (from -6 to 0dBm) function for stable RF output
* CLI, SNMP management for ONU module
* WEB, SNMP management for EOC module
* IP67 Housing, aluminum alloy die casting shaping
* Line Power 60AC feed in and out
EOC SML7954-R1 All-In-One (ONU+OR+4*EOC
The Eoc build with EPON/GPON ONU, EOC master and Optical Receiver module in one housing.
The Optical Receiver module received the optical signal from the Optical Transmitter of HFC network,
and the signal processed by the PD, Amplifier, EQ and AGC to a stable RF output. The output level will
be up to 108dBuv( 4*RF output) or 112dBuv (2*RF output). Ethernet data is delivered to ONU through
the EPON or GPON network form the OLT.
The EOC Master module meets Home-plug AV standards, is designed based on Qualcomm AR7410
chip-set with high anti-jamming capability OFDM technology. It will modulate the Ethernet data into
EOC RF signal in the 7.5-65MHz .The EOC signal and CATV signal (87~860MHz) can run on one coaxial
cable without interference. The EOC Master can provide high speed data service at 600Mbps PHY
Layer speed, the MAC Layer throughput is up to 320Mpbs.
Feature:
* 1 EPON or GPON ONU module.
* 4 HomePlug AV EOC Master modules.
* 1 HFC Optical Receiver.
* Available with WDM inside or not.
* RF output configurations with 4 outputs.
* Line Power (from 90 to 264 VAC) or Cable Line Power (60VAC) optional.
* 35/47, 42/54, 65/87 type High/Low Filter optional to meet your network.
EOC SLAVE
SL-5024W 4FE+WIFI
The EOC SLAVE is the based on HomePlug AV solution for Ethernet access over coax. It works
together with EOC master which is based on HomePlug AV solution as well to construct a two-layer
Ethernet data transmission channel on CATV coax cable, provide the Ethernet access service based on
the existing coax cable networking.
SL-5204W series is based the Qualcomm chipset solution,with high anti jamming capability OFDM
technology. The 7.5-65MHz low frequency band is used for EOC signals. Built in high isolation filter as
CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run on one cable
without interference. The PHY Layer speed is 600Mbps, the MAC Layer throughput is up to 320Mpbs.
Feature:
*Based on HomePlug AV solution and Qualcomm chipset.
*7.5-65Mhz frequency for EOC signals., no influence on CATV Service.
*PHY Layer speed 600Mbps.
*Support data encryption.
*4*100M auto-negotiation Ethernet port.
*Support the isolation of slave under one master.
*Support Port-based VLAN and 802.1q VLAN.
*Support bandwidth limited.
*Support QOS configuration based on slave port or VLAN.
*Support broadcast storm control.
*Support data packages count.
*Automatically get configurations from EOC Master when Newly connected with powered on.
*Support WEB,CLI and SNMP management.
*Support on-line upgrading.
1550nm Optical Transmitter
ZY-1550
ZY-1550series external modulation optical transmitter is one of the independent 1550nm laser
transmission equipment productions of ZHIYI, which has a complete independent intellectual
property. It has high performance, high reliability and excellent performance and price ratio. It can be
widely used in all kinds of medium and long distance digital and analog signal communication. The
application scene includes large and medium-sized cable TV. Trunk and distribution network,
CWDM/DWDM system, optical fiber sensing and security monitoring system. According to the
requirements of application scenarios for device, this series of products contains 3 different
configurations:
The ZY-1500-A series focuses on product cost and is an economical external modulation transmitter.
The JDSU single fiber modulator is used to satisfy the users’ needs of point to point transmission,
and the SBS value can be controlled in 13-16dBm, (analog signal transmission <50km, digital
signal <75km). It can be cascaded for long range amplification to meet the signal transmission needs
between the two stage machine room and the distribution network. It is an ideal choice for the
1550nm trunk transmission network.
The ZY-1550-B series uses OCLARO dual fiber modulator, SBS value can be controlled in 13-19dBm,
can be used for point to point long distance transmission, and can also be used to distribute
network signal (with high SBS threshold, the device can still maintain good signal quality
when the maximum 19dBm laser power is pushed to the fiber transmission network). It is a widely
adopted optical transmitters.
The ZY-1550-C series uses wavelength adjustable laser module, JDSU dual fiber modulator, and SBS
threshold 13-19dBm. It is suitable for signal front machine room and middle distance trunk link
simulation, digital signal broadcasting and optical interpolation. It is the best choice for constructing
large and medium HFC and complex analog and digital signal interaction network
Feature:
Block diagram
High Power Er/Yb Doped Fiber Amplifier
ZY-50-EYA
1U/2U/3U 19”standard rack, Max output port can reach 256 outputs.
The ZY-50EYAxx series high power amplifier is a high power multi-output optical fiber amplifier with a
gain spectrum bandwidth of 1535~1565nm. It is mainly designed for CATV or 1~8 continuous strip
channels (ITU wavelength) applications. It provides a flexible, low-cost solution for large-scale FTTH
coverage of CATV systems in large and medium-sized cities.
50EYAxx can achieve single-wavelength cable TV transmission, CWDM single-fiber three- wave, flat-
gain type, DWDM; its reliable and excellent performance ratio between the main application of FTTH,
FTTB, DBS, MMDS, FTTX pon, is to build CATV large Medium-sized optical fiber transmission network
is an important equipment.
1U 19”standard rack
2U 19”standard rack
3U 19”standard rack
Feature:
* Advanced LG switch low-power circuit design, greatly reducing the overall power
consumption and heat.
* Perfect APC, ACC, ATC control, ensure the long life and high reliability of PUMP laser.
* Using digital control chip, remote or local output power adjustable.
* Built-in low-noise preamplifier eliminates the need for cascaded EDFA, allowing input light to
be as low as -5dBm, greatly reducing CNR and MER degradation.
* Demultiplexer for 1310/1490/1550nm EPON and GPON. It greatly facilitates network applications with
PON. Low noise figure (type ≤ 4.5dB, Max ≤ 5.0dB).
* The front panel can be removed and replaced flexibly according to the number of output ports.
* Can add a built-in optical switch module to facilitate the expansion of the device function.
* Cooling fan supports online replacement.
* RJ45 provides serial communication and SNMP network management interface; Carrier-
grade dual power hot backup, CPU assignable power.
Feature:
* Adopts high sensitive O/E converter, wavelength
range 1200~1620n
* Optional optical AGC control function .
* Low power consumption , low cost, high-
performance and high stability.
* Smart Plastic case
lndex
ltems Remarks
Unit Min. Typ. Max.
Operating Wavelength nm 1200 1620
-20 -1 Normal Model
Optical Input Range
Optical dBm -20 2 Model with AGC
Index AGC Control Range dBm -12 -2 Model with AGC
ptical Return Loss dB 45
Fiber Connector SC/APC
perating Bandwidth MHz 47 1002
Output Level dBuV 70 Pin=-15dBm
Flatness dB -0.75 0.75 47 ~1002MHz
slope dB -0.5 0.5 47 ~1002MHz
Temp Stability dB -1 1 -25 ~+65℃
RF Index No. of Output Port dB 1 2
14 47~550MHz
Return Loss dB
16 550~1002MHz
MER dB 34 Pin=-12dBm ~-2dBm
lnput lmpedance ohm 75
RF connector F Metric/lmperial Specified by user
Power Supply v 5 Dc
Power Consumption w 0.8
perating Temp c -25 65
General
Storage Temp c -40 65
Index
Operating Relative % 5 95
Dimension mm 74×64×27
Weight Kg 0.15
Note:
OR1001: Normal type
OR1001A: The type with AGC cnotrol.
OR1001F: The type with a filter.
OR1001W: The type with WDM.
OR2001 FTTH OPTICAL NODE (Receiver )
OR2001 FTTH optical receiver adopts high-performance and high sensitivity O/E converter, and low-noise
GaAs amplifier part is used in the first and second stages. It has excellent performance in the high dynamic
optical power receiving range of - 17dbm to + 3dbm. It can be applied in EPON and GPON, compatible with
any FTTx technology。
Feature:
* Adopts high performance O/E part, wavelength
range 1200~1620nm.
* Applied in EPON and GPON, compatible with any
FTTx technology.
* Optical AGC control function, the output level
keeps unchanged when input in range -7~+2dBm
* Low power consumption , low cost, high-
performance and high stability.
* RF output level adjustable.
* Metal case
PR1001 FTTH NODE passive optical receiver is for low-cost FTTH network. It has photodiodes with high
responsivity, patented assembly, high reliability, no power supply and maintenance-free. The model with
optical filter and WDM can build all-optical networks based on WDM technology. 1550nm is applied for CATV
RF transmission and 1310/1490nm is for G/EPON.
Feature:
* Suitable for low-cost FTTH network.
* Optical filter and WDM optional.
* No power supply, maintenance-free.
* High linearity and flatness in 47-1218MHz.
* Patented packaging technology to minimize the
dimension.
* Light and durable PVC housing.
lndex
ltems Remarks
Unit Min. Typ. Max.
CATV Operating
nm 1540 1563
Wavelength
COM Operating
1310, 1490,1550
Wavelength nm
PON Pass Wavelength nm 1310,1490
Channels Isolation dB 40 1490 & 1550nm
Optical
Optical Input Range dBm -10 0
Index
AGC Control Range dBm -7 -2 Pin< -7dBm, AGC exit
0.85 1310
Responsibility A/W
0.9 1550
optical Return Loss dB 45
SC/APC COM port
Fiber Connector
SC/PC PON Port
operating Bandwidth MHz 47 1002
Output Level dBuV 62 Pin= -1dBm
38 Pin= -1dBm
MER dB
30 Pin= -10dBm
RF Index BER dB 1E-09 Pin= -10dBm~0dBm
No. of Output Port 1
Return Loss dB 14 47~1002MHz
lnput lmpedance ohm 75
RF connector F Metric/lmperial Specified by user
Power Consumption w 0
perating Temp c -40 65
General
Storage Temp c -40 65
Index
Operating Relative % 5 95
Dimension mm 88x86x24
Note:
PR1001: Normal type
PR1001A: The type with AGC cnotrol.
PR1001F: The type with a filter.
PR1001W: The type with WDM.
PR2001 PASSIVE FTTH Mini NODE
PR2001 Series provides 40-1002MHz bandwidth, Excellent low-light amplifier and gain adjustment unit,
industrial 8-bit control unit , convenient interface and application for terminal customers.
Feature:
* Analog TV & Digital TV FTTX O-E converter applications.
* High linearity, low distortion and wide optical power AGC range(-13dBm to -
2dBm).
* Wide operating optical input range of 2 to -20dBm at 1550nm.
* Optional optical power input -2 to 1dBm for RF output performance.
* Optical Input -13 to -2dBm, RF output: +80dBuV per channel at 3.5% OMI
(22dBmV modulation input).
* Full frequency range 40-1002MHz with CATV
* Small flexible installation and Power supply on the line.
Customer Interface
RF Connector F-female
Optical Connector SC/APC or FC/APC
Power Supply F-female
Optical Parameter
Responsivity A/W ≥0.9
Input Optical Power dBm -10~+2
Optical Return Loss dB ≥45
Input Wavelength nm 1260~1600
Optical Fiber Type Single Mode
RF Parameter
Frequency Range MHz 47-1000
Flatness dB ±0.75
Output Level dBµV ≥82 -3dBm Input Power
CNR dB ≥53.6 -2dBm Input Power
CSO dB ≥62
CTB dB ≥65
Return Loss dB ≥16
Output Impedance Ω 75
Other Parameter
Power Supply VDC 12
Power Consumption W <2
Dimensions mm 80*60*20
Power Consumption W <2
Note:
PR2001: Normal type
PR2001A: The type with AGC cnotrol.
PR2001F: The type with a filter.
PR2001W: The type with WDM.
CONTACT US
Contact us for more information regarding ZHIYI and our porducts .