Professional Documents
Culture Documents
Additional Data :
Group 1 2 3 4 5 6 7 8 9 10
Ts (℉) 78 79 80 78 79 80 78 79 80 78
BHT (℉) 183 184 182 183 184 182 183 184 182 183
TD (ft) 4,200
Rm (Ω𝑚) 1.54 1.52 1.53 1.54 1.52 1.53 1.54 1.52 1.53 1.54
MW (ppg) 11 12 11 12 11 12 11 12 11 12
Rs (Ω𝑚) 1 2 1 2 1 2 1 2 1 2
m 2
n 2
a 1
HD (inch) 6
Porositas 18%
SOR 20%
Interval (ft) 0.5
Zona A 3,977 ft - 4,004 ft
Zona B 4,018 ft - 4026 ft
Zona C 4,032 ft - 4,036 ft
Zona D 4,039 ft - 4,042 ft
Zona E 4,049 ft - 4,055 ft
Zona F 4,060 ft - 4,073 ft
10. Determine the RLLM’ using figure 34 on page 42 (Bed thickness is based on the zone
thickness to be analyzed)
11. Calculate RLLS’ / RLLD’
12. Calculate RLLM’ / RLLD’
13. Determine the value of Di, Rxo / Rt, and Rt / RLLD using figure 38 on page 47
14. Calculate Rt and Rxo respectively using Rt / RLLD and Rxo / Rt.
15. Calculate F using the equation of : F = a × Ø^(-m)
16. Calculate Swa using the equation of : Swa = (F × (Rw/Rt))^n
17. Calculate Rmf/Rw
18. Determine the Swr using figure 40 on page 49.
19. Calculate the average of the result and insert the calculation result from the procedure
above in a form of table.