Professional Documents
Culture Documents
Mix Design of DLC
Mix Design of DLC
00 mm NMAS
DLC as per MORT&H, Table 600-1
Material 20.00 mm 10 mm Sand Zone II Blend Mix
Percentage of 43 30 27 100
mix
DLC Gradation
Sieve of Mixed Ideal Limit Lower Limits
Blended
120.00
DLC Grdation
100.00
80.00
% OF PASSING
60.00
40.00
20.00
0.00
0 5 10 15 20 25 30
NO OF SIEVES
Ideal Limit DLC Gradation of Mixed Blended Lower Limits
Upper Limits
MAS
MORT&H, Table
600-1
Upper
Limits
100.00 100
95.00 75-95
70.00 50-70
55.00 30-55
42.00 17-42
22.00 8-22
17.00 7-17
12.00 2-12
10.00 0-10 After obating the individual Gradation of each materials 20 mm,
REMARKS: 10 mm & River Sand Zone II with designated sieves as per the
specification, combined gradtion will be achived by this values
After finiding the blending ratio, the mixture will be added on by water with th
After casting the cubes we need to find the wet density & after dividing the we
cubes reqd. for Avg. of cube test results will be 10 N/mm2 & individual should
Now as per obtained tabular format we need to find out the MDD & OMC
MC % FDD gm/cc
5 2.139 2.3
5.5 2.181
6 2.278
2.25
6.5 2.263
7 2.198
2.2
2.15
2.1
For DLC compaction testing & cube sampling reqd. at
site as 2000 sqm 3 no of compaction test & 1000
25 30 sqm 01 set of cube (03 nos) reqd as per the MORT&H 2.05
4.5 5
& IRC SP 49 2014
ower Limits
ation of each materials 20 mm, The max. (Agg:Cement ratio will be 15:1) as per MOR&H & IRC for OPC 53 grade of Cemen
h designated sieves as per the
n will be achived by this values The same consider as 14:1 in IRC SP 49 2014
Considering the cement content 160 kg/m3 & Agg will be
2240
will be added on by water with the following % like (5.0,5.5,6.0,6.5,7.0) & cast the standard cubes with 05 no for each of % of water
et density & after dividing the wet density by MC we will find the Dry density for the same. After 7 days checking the compressive st
e 10 N/mm2 & individual should not less than 7 N/mm2
MDD Vs OMC
2.3
2.25
2.2
2.15
2.1
2.05
4.5 5 5.5 6 6.5 7 7.5
ORT&H specification