Professional Documents
Culture Documents
5 Grading
Earth work in excavation in cutting and dressing of sides in slopes and
to proper level in ordinary and hard soil or decomposed soft rock with
all lifts, including clearing
grubbing and clearing shurbs of both areas of excavation and filling, 50
i Sqm 1
dewatering if
required, disposal of the excavated spoils in spcified areas within Plant
boundary.
Good quality earth/ murrum etc. brought from sources outside factory
i CUM 1 195
premises.
Good quality earth/ murrum etc. as per availability in factory premises.
ii CUM 1 70
7 Backfilling and compaction
Backfilling in foundation/ plinth with approved quality earth/ murrum etc.
brought from sources outside factory premises arranged by
i contractor including purchase of earth, excavation, loading, unloading, CUM 1 170
and transporting, royalty, compacting up to 95% com
Backfilling in foundation/ plinth with available earth from item no. A1.1a
ii CUM 1 50
to A1.2b,
Earth work in area dressing including cutting / filling upto 300mm.depth
A8 SQM 1 35
as per the diretion of Engineer in charge.
Sand filling (Free from any vegetation, organic etc ) with compaction as
mentioned in drawing in layer as per engineer in charge instruction, in
A9 case of pure sand flooding with water is permissible as per the diretion CUM 1 282
of Engineer in charge.
Stone dust filling (Free from any vegetation, organic etc ) with
compaction as
A9.1 mentioned in drawing in layer as per engineer in charge instruction, in CUM 1 440
case of pure sand flooding with water is permissible as per the diretion
of Engineer in charge.
Slope Protection
Providing and laying Pitching to slopes, grade separation and sides of
storm water drains/ water pond including breaking of rubble, voids to
be filled with sand,
A10 formation of neat slopes to required profile, watering, tamping, raking
out joints and grouting them in cement mortar 1:3 as per the diretion of
Engineer in charge.
i 150mm thick pitching using 150 mm down black granite stones SQM 1 345
ii 300mm thick pitching using 300 mm down black granite stones SQM 1 650
iii 115mm thick pitching using fly ash bricks SQM 1 285
iv 230mm thick pitching using fly ash bricks SQM 1 540
A11 RR Stone Masonary With Cement Morter M7.5 CUM 1 2150
Fly ash filling to be done in different area including loading from a
designated location as defined by EIC, unloading, spreading to
required level and grade and transporting,
A12 royalty, compacting up to 95% compaction with 200 mm thick layers
as per the diretion of Engineer in charge including shifting from leads
as follows:-
PART B - CONCRETING
B11.1 Fixing of Mild steel Grade I conforming to IS 432 part I.(only 6500
MT 1
a considering steel as free issue)
Supply and fixing of High yield strength deformed bars Fe 415
B11.2 MT 1 65000
conforming to IS 1786.(Make: RINL/ SAIL/ TATA)
B11.2 Fixing of High yield strength deformed bars Fe 415 conforming to IS 6500
MT 1
a 1786. (only considering steel as free issue)
Providing and fixing rust proof expansion anchor fasteners of
approved quality at all heights, as per manufacturer's specifications
B17 including nuts, washers, bolts,
scaffolding, drilling with electric drill etc on concrete structures
complete as specified
B17.1 For bolts 12mm dia 150 mm long. NOS 1 357
B17.2 For bolts 16mm dia 150 mm long NOS 1 409.5
B17.3 For bolts 20mm dia 150 mm long. NOS 1 472.5
Providing and laying Polyethylene sheet as per manufacturer's
B18
specifications etc. complete as specified and directed.
B18.1 LDPE sheet of thickness 250 micron SQM 1 40
B18.2 HDPE sheet of thickness 1.20 mm SQM 1 58
Casting, supplying and erecting in position reinforced cement
concrete precast elements of M20 grade with 20 mm and down
B19 graded stone aggregates, as post, beam,boundary wall
panels,columns,drain covers and slabs etc., for all leads and levels
including all moulds, shuttering and centering, vibrat
Providing Constructing first class fly ash brick masonry of thickness 230 mm
and above in bricks conforming to class 30 (1A) IS 13757:1993 & IS
2212:1991 at all
heights and depths for retaining walls,wall footings, parapets, partitions,
C1 steps, drains, manholes, trenches, etc. including all tools tackles, manpower,
transportation,
loading, unloading etc.
Same as above Item Code C3 but for coursed rubble masonry (second
C4 sort) with hammer dressed stones of size 400mm X 300mm X 200mm CUM 1 1995
in cement mortar 1:5.
Flush cement pointing (1:1) to joints of rubble masonry walls,
C5 including raking out joints, staging, scaffolding and curing, etc complete SQM 1 63
as specified and directed.
C6 As Item Code C5 but for raised cement pointing. SQM 1 78.75
Providing and applying cement plaster at all surfaces (internal/ external/
ceiling etc.) at all levels including surface preparation, staging, scaffolding
C7 roughening, finishing
the surfaces, curing etc. complete
C7.1 1:4 Cement Sand plaster 6 mm thk sq.m. 1 140
C7.2 1:3 Cement Sand plaster 8 mm thick sq. m. 1 150
C7.3 1:6 Cement Sand plaster 12 mm thick sq. m. 1 168
C7.4 1:6 Cement Sand plaster 20 mm thick sq. m. 1 178
C7.5 1:1:4 Cement Lime Sand plaster 8 mm thick sq. m. 1 180
C7.6 1:1:6 Cement Lime Sand plaster 15 mm thick sq. m. 1 180
C7.7 1:0.3:2.5 Cement Lime Sand plaster 5 mm thick sq. m. 1 183
C7.8 1:1:6 Cement Lime Sand plaster 20 mm thick sq. m. 1 190
Providing and laying plaster of paris 3mm thick over walls including
finishing the
C7.9 surface smooth by rubbing with emery paper with arranging all kind of sq. m. 1 73.5
scaffolding etc as per requirement.
PART D - PAINTING
White wash / Distemper/ Cement paint two or more coats, using roller
and brush, to give an even shade on new surfaces at all heights and
D2 positions including surfacepreparation I.e cleaning, scraping, brooming
of surfaces, filling putty in cracks & holes (MAKE: BURGER/
NEROLAC/ ASIAN/ ICI)
D2.1 huttering sq. m. 1 18
D2.2 Bf sq. m. 1 68.25
D2.3 Decorative type water proof cement paint sq. m. 1 50.4
D2.4 Plastic emulsion paint sq. m. 1 130
D2.5 Plaster of paris sq. m. 1 73.5
D2.6 Water bound distemper sq. m. 1 68.25
D2.7 Exterior weather coat upto a maximum of 12mtr ht sq. m. 1 165
D2.8 synthetic enamel paint sqm 1 130
D2.9 Aluminium paint sqm 1 130
PART E - FLOORING & TILING
Providing and fixing ceramic floor tiles of approved quality & shade
(Make: Kajaria/ Bell/ Johnson or equivalent) on floor, set jointed in neat
E6 cement slurry, laid on 20 mm thick plaster with CM 1:6 complete. SQM 1 1000
E6.1 Same as above but using+B363 Vitrified Porcelein floor tiles SQM 1 1300
Providing and fixing ceramic wall tiles of approved quality & shade
(Make: Kajaria/ Bell/ Johnson or equivalent) on wall at all positions , set
E6.2 jointed in neat cement slurry, laid on 20 mm thick plaster with CM 1:6 SQM 1 915
complete.
E6.3 Same as above but using+B363 Vitrified Porcelein floor tiles SQM 1 1080
Providing & laying 50 mm thk cement concrete granolithic or Indian
Patent Stone (IPS) floor topping in alternate panels with M30 concrete
E9 with graded course SQM 1 340
aggregate size 12.5 mm and down, thoroughly compacted to finished
thickness and levels, rendered s
Flooring Providing and laying to slopes and levels thichkness
120mmcement concrete M15 by using 20 mm down size metal
E10 aggregates including surfacepreparation by one coating of plain cement SQM 1 640
mortar, compaction, curing, etc. complete, as specified & dire
Providing and fixing in position 40mm thick superior class Indian teak
wood panelled door in 65mm x 140mm teak wood frame including
G1 fixing screws, holdfasts, copper oxidised brass fixtures, stoppers, SQM 1 2000
glazing, beading, architrave, a coat of coal tar to ba
Same as Item Code G1 but 40 mm thk block board Solid Core Flush
G2 SQM 1 1400
Door.
G2.1 Non-decorative type with commercial plywood on both faces SQM 1 1700
Providing and fixing M.S.Steel Doors (Single or double shutter)
including outer fixed frame and shutter made out of rolled steel
G3 sections. Shutter shall be provided with 16 lauge M.S. Sheet on one/
both sides as specified, suitably stiffened with necessary
G3.1 M.S. Sheet on one side of shutter-single shutter door SQM 1 1200
G3.2 M.S. Sheet on one side of shutter-double shutter door SQM 1 1800
G3.3 M.S. Sheet on both sides-single shutter SQM 1 2300
G3.4 M. S. Shet on both sides-double shutter SQM 1 2300
Providing and fixing pressed steel hollow metal flush steel doors 40
mm thick,
shutters with 16 gauge and pressed steel metal frame with 18 gauge of
G4 230 mmor less in width, with necessary hold fasts, vision panel, rubber
buffers and lugs, gaskets
includin
Providing and fixing in position 'z' type special steel ventilator witrh
standard
G7 section as per IS:1038 oxidised brass fixtures, aluminium beading, SQM 1 1550
neoprene gaskets, weld mesh, 4mm thick plain glass, putty etc all as
per Engineering Standard including 2
Providing and fixing in position anodised Aluminium Casement
Windows with top or side hung shutters with 6.3 mm clear / laminated
G8 glass panes in 'z' section SQM 1 2150
including rubber lining, transoms, mullions, neoprene gaskets,
aluminium fixtures such as c. p. br
Providing and fixing in position anodised aluminium doors in 100 x 45
mm bottom rails, 6.3 mm thick laminated glass glazing for top portion,
G9 bottom portion provided SQM 1 3000
with 18 gauge aluminium sheet on both the sides with plywood packing
in between, 2 Nos. f
Providing & Fixing universal type hydraulic door closer of approved
G10 Nos. 1 650
quality complete
Provide and Fixing of 4 mm toughened glass in Aluminium
G12 pivoted/Sliding windows /Doors with necessary fittings by usings Sqm 1 4250
tools and tackels.
Providing and Fixing 100 mm wide Indian fabric for vertical blinds of
approved make, colour and texture including all fittings of approved
G13 quality complete as Sqm. 1 1375
directed by the Architects - Basic Rate - Rs.120/ - Sft
G 14 Providing and fixing Tower bolts(8-10") Nos 1 145
G 15 Providing and fixing Cylindrical door locks Nos 1 335
G 16 Providing and fixing door handles Nos 1 90
Repairing of all the wooden
doors,windows,shutters,drawers,cupboards with required
G16 accessories,all the T/ P require to complete ,supplied by contractor.
Supply & fixing of Roof Sheeting with sheets of yield strength 550N/
mm2 , thickness
H1 >= 0.50 mm as per drawing including all fixtures (Clip on colour coated SQM 1 990
sheet). Measurement on laid area basis
Supply & fixing of Wall Sheeting with sheets of yield strength 345N/
mm2 , thickness
H2 >= 0.60 mm as per drawing including all fixtures (Clip on colour coated SQM 1 1100
sheet).
Providing & fixing MS louver openable / fixed door with outer frame
made of MS angle 50x50x6 and inner frame 50x50x3 MStube with 18
I27 guage MSsheet for louvers, including one coat of red oxide primer SQM 1 1850
PART-J-WINDOWS N LOUVERS
Providing & fixing MS louver openable / fixed door with outer frame
made of MS angle 40x40x5 and inner frame 40x40x2 MStube with 18
J2 guage MSsheet for louvers, including one coat of red oxide primer SQM 1 3375
Fixing of UPVC vent pipes Including labour & T&P all complete as
directed by the Engineer-in-charge.
J3 SQM 1 3675
J5 Providing and fixing PVC door, factory made, for bathrooms SQM 1 900
J6 Providing and fixing wire mesh over rain water pipe NOS 1 140
Providing and laying floor tiles (ceramic based decorative type) 450 x
J7 450 joint free on a 40 mm thk bedding of cement mortar (1:3) SQM 1 1100
Providing and laying wall tiles (ceramic based decorative type) 315 x
J8 420 joint free on a 25 mm thk bedding of cement mortar (1:3) SQM 1 1155
Scarifying, remove and disposal of the extracts of damage road for the
M.A.12 patch work Sqm 1 65
Boundary Wall(BW)
N
Providing and fixing of concerntina wire
N1 Rmt 1 240
Providing and fixing of Y angle of 50 X 50 X 6 mm with leg 450mm long
N2 No 1 780
with V section of 350 X 350 mm.
Grouting of column grooves (Gap between column groove and panel)
N3 Rmt 1 290
with master flow/ flow cable to make it Monolithic.
Drain
O
Supplying GI pipes screwed end of medium quality (B class)
conforming to IS: 1239 – 1990 (Part – 1) of approved make bearing
O1 ISmark, fitting and fixing and/ or laying to the true of alignment in
trenches of the following of the following nominal bore in
Supply & Fixing of Aluminium Partition Wall made of natural matt finish
anodized INDAL aluminium section of size 2.5"*1.5" inch (or
equivalent) with 1.2 M height
Q5 smoke glass at 0.9 M height from finished floor level & aluminium SQM 1 3500
sheet as partition material (design as per EIC) including all
accessories,tools,labour cost etc as per the instructions of EIC.
Providing & fixing of canopy with MS steel & GI insulation sheet &
A removal of Old Sqm
one