Professional Documents
Culture Documents
X35
"The repair methods given by the manufacturer in this document are based on the technical All copyrights reserved by Renault.
specifications current when it was prepared.
The reproduction or translation in part of whole of the present document, as well as the use
The methods may be modified as a result of changes introduced by the manufacturer in the of the spare parts reference numbering system, are prohibited without the prior written
production of the various component units and accessories from which his vehicles are consent of Renault.
constructed."
Contents
Page
Headlining: Removal -
Refitting 71A-4
FRONT SEAT FRAMES AND
Front door sill lining: 75A
MECHANISMS
Removal - Refitting 71A-6
Front seat frame: Removal -
Rear door sill lining: Removal
Refitting 75A-1
- Refitting 71A-7
Front seat base frame:
Rear wheel arch lining:
Removal - Refitting 75A-3
Removal - Refitting 71A-8
Front seatback frame:
A-pillar trim: Removal -
Removal - Refitting 75A-7
Refitting 71A-9
Front seat runner: Removal -
B-pillar trim: Removal -
Refitting 75A-11
Refitting 71A-10
Complete front seat:
Rear quarter panel trim:
Removal - Refitting 75A-13
Removal - Refitting 71A-12
Essential equipment
diagnostic tool
REMOVAL
IMPORTANT
To avoid any risk of damaging the systems, apply
the safety and cleanliness instructions and ope-
ration recommendations before carrying out the
repair (see Airbag and Pretensioners: Precau-
tions for repair) (88C, Airbags and pretensio-
ners).
133367
IMPORTANT
a Remove:
To avoid any risk of triggering when working on
or near a pyrotechnic component (airbags or pre- - the bolts (1) ,
tensioners), lock the airbag computer using the
diagnostic tool. - the handbrake trim.
When this function is activated, all the trigger a Disconnect the rear electric window switch connec-
lines are inhibited and the airbag warning light on tors.
the instrument panel lights up continuously (igni-
tion on).
a Remove:
IMPORTANT
Never handle the pyrotechnic systems (preten- - the side door seals partially,
sioners or airbags) near to a source of heat or
naked flame - they may be triggered. - the central console (see Centre console: Remo-
val - Refitting) (57A, Interior equipment),
71A-1
BODY INTERNAL TRIM
Floor carpet: Removal - Refitting 71A
II - OPERATION FOR REMOVAL OF PART
CONCERNED
133749
133579
a Remove:
- the front seat spacers (2) ,
- the floor carpet.
REFITTING
II - FINAL OPERATION
a Refit:
- the B-pillar linings (see 71A, Body internal trim,
B-pillar trim: Removal - Refitting, page 71A-10) ,
- the rear door sill linings (see 71A, Body internal
trim, Rear door sill lining: Removal - Refitting,
page 71A-7) ,
- the front door sill linings (see 71A, Body internal
trim, Front door sill lining: Removal - Refitting,
page 71A-6) ,
- the rear bench seat base (see Single unit rear
bench seat: Removal - Refitting) ,
- the front seats completely (see 75A, Front seat
frames and mechanisms, Complete front seat:
Removal - Refitting, page 75A-13) ,
71A-2
BODY INTERNAL TRIM
Floor carpet: Removal - Refitting 71A
- the central console (see Centre console: Remo-
val - Refitting) (57A, Interior equipment),
- the side door seals.
71A-3
BODY INTERNAL TRIM
Headlining: Removal - Refitting 71A
II - OPERATION FOR REMOVAL OF PART
Essential special tooling CONCERNED
Car. 1363 Set of trim removal levers.
REMOVAL
- the rear door sill linings (see 71A, Body internal a Remove the clip (1) using the tool (Car. 1363).
trim, Rear door sill lining: Removal - Refitting,
a Remove the mounting supports of the sun visors by:
page 71A-7) ,
- removing the support bolt,
- the B-pillar linings (see 71A, Body internal trim,
B-pillar trim: Removal - Refitting, page 71A-10) , - tightening the support bolt by a few turns,
- the rear quarter panel trims (see 71A, Body inter- - pushing on the support bolt to put the bush in the
nal trim, Rear quarter panel trim: Removal - Re- "not deformed" position,
fitting, page 71A-12) - unclipping the supports.
- the windscreen pillar trims (see 71A, Body inter- a Move aside the headlining.
nal trim, A-pillar trim: Removal - Refitting, page
71A-9) . a Cut the cement bead.
a Tilt the seatbacks of the front seats backwards. a Remove the headlining (this operation requires two
people).
REFITTING
71A-4
BODY INTERNAL TRIM
Headlining: Removal - Refitting 71A
- the grab handles (see Grab handle: Removal -
Refitting) (57A, Interior equipment),
- the interior light (see Courtesy light: Removal -
Refitting) (81B, Interior lighting),
- the sun visors (see Sun visor: Removal - Refit-
ting) (57A, Interior equipment).
133480
a Apply adhesive to the headlining (part number 77 11
218 570) (2) .
71A-5
BODY INTERNAL TRIM
Front door sill lining: Removal - Refitting 71A
REMOVAL II - OPERATION FOR REMOVAL OF PART
CONCERNED
133744
a Remove:
- the rear section of the front door sill lining at (4) ,
- the front door sill lining.
REFITTING
133745
a Unclip the bonnet release control (3) . I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the front door sill lining.
II - FINAL OPERATION
a Clip on the bonnet release control (3) .
a Refit:
- the front seat lower casing (outer section) (see
77A, Front seat trim, Front seat lower cover:
Removal - Refitting, page 77A-7) ,
- the front side door seal.
71A-6
BODY INTERNAL TRIM
Rear door sill lining: Removal - Refitting 71A
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Tightening torquesm
REMOVAL
133932
REFITTING
a Refit:
71A-7
BODY INTERNAL TRIM
Rear wheel arch lining: Removal - Refitting 71A
Essential special tooling
REMOVAL
133600
a Remove:
- the clips (1) using the tool (Car. 1363),
- the rear wheel arch trim.
REFITTING
II - FINAL OPERATION
a Refit the luggage compartment carpet.
71A-8
BODY INTERNAL TRIM
A-pillar trim: Removal - Refitting 71A
Essential special tooling
REMOVAL
133728
a Keep the upper section held away by sliding the
windscreen pillar trim at (2) .
REFITTING
II - FINAL OPERATION
133728 a Refit the front side door seal.
a Unclip the windscreen pillar trim at (1) using the tool
(Car. 1363).
71A-9
BODY INTERNAL TRIM
B-pillar trim: Removal - Refitting 71A
Tightening torquesm
REMOVAL
a Remove:
- the front door sill lining (see 71A, Body internal 133584
trim, Front door sill lining: Removal - Refitting,
a Unclip blanking cover (2) .
page 71A-6) ,
a Remove the height adjustment control of the front
- the rear door sill lining (see 71A, Body internal side seat belt.
trim, Rear door sill lining: Removal - Refitting,
page 71A-7) .
133585
a Unclip the trim (3) .
133936
a Remove:
71A-10
BODY INTERNAL TRIM
B-pillar trim: Removal - Refitting 71A
II - OPERATION FOR REMOVAL OF PART - the front door sill lining (see 71A, Body internal
CONCERNED trim, Front door sill lining: Removal - Refitting,
page 71A-6) ,
- the front seat lower casing (outer section) (see
77A, Front seat trim, Front seat lower cover:
Removal - Refitting, page 77A-7) ,
- the side door seals.
133931
a Squeeze the clips of the B-pillar trim at (4) .
a Unclip the B-pillar trim at (5) and at (6) .
a Remove B-pillar trim.
REFITTING
II - FINAL OPERATION
a Clip the trim piece in place (3) .
a Refit the height adjustment control of the front side
seat belt.
a Clip on the blanking cover (2) .
a Refit:
- the front side seat belt return mechanism,
- the bolt of the front side seat belt return mechanism
(1) .
a Torque tighten the front side seat belt return me-
chanism bolt (21 N.m).
a Refit:
- the blanking cover (1) ,
- the rear door sill lining (see 71A, Body internal
trim, Rear door sill lining: Removal - Refitting,
page 71A-7) ,
71A-11
BODY INTERNAL TRIM
Rear quarter panel trim: Removal - Refitting 71A
REMOVAL II - FINAL OPERATION
a Refit:
I - REMOVAL PREPARATION OPERATION - the rear parcel shelf lining (see 71A, Body internal
trim, Rear parcel shelf lining: Removal - Refit-
a Remove:
ting, page 71A-13) ,
- the rear door sill lining (see 71A, Body internal - the rear door sill lining (see 71A, Body internal
trim, Rear door sill lining: Removal - Refitting,
trim, Rear door sill lining: Removal - Refitting,
page 71A-7) ,
page 71A-7) .
- the rear parcel shelf lining (see 71A, Body internal
trim, Rear parcel shelf lining: Removal - Refit-
ting, page 71A-13) .
133577
a Remove:
REFITTING
71A-12
BODY INTERNAL TRIM
Rear parcel shelf lining: Removal - Refitting 71A
Tightening torquesm
REMOVAL
133379
a Unclip the trim from the high level brake light by
pressing on the clips simultaneously (2) .
133937
a Remove the lower bolts from the rear side seat belts
(1) .
a Tilt the rear bench seatback.
133747
a Unclip:
- the guides of the rear side seat belts (3) ,
- the trim of the rear centre seat belt (4) at (5) .
71A-13
BODY INTERNAL TRIM
Rear parcel shelf lining: Removal - Refitting 71A
133748
a Unclip the clips (6) .
a Remove the rear parcel shelf trim.
REFITTING
71A-14
SIDE OPENING ELEMENT TRIM
Front side door trim: Removal - Refitting 72A
REMOVAL
133337
a Remove:
- the bolt (2) ,
- the pull handle (3) .
133354
a Remove the trim (1) .
72A-1
SIDE OPENING ELEMENT TRIM
Front side door trim: Removal - Refitting 72A
II - OPERATION FOR REMOVAL OF PART REFITTING
CONCERNED
a Refit:
133335 - the pull handle (3) ,
a Remove the front side door trim at (5) and (6) .
- the bolt (2) ,
72A-2
SIDE OPENING ELEMENT TRIM
Rear side door trim: Removal - Refitting 72A
REMOVAL II - OPERATION FOR REMOVAL OF PART
CONCERNED
133322
a Remove the rear side door trim at (3) and at (4) .
REFITTING
133323
a Remove: I - REFITTING PREPARATION OPERATION
- the bolt (1) , a Eliminate the residues of sealing mastic on the rear
- the pull handle (2) . side door trim and on the rear side door box section
using a LINT-FREE CLOTH soaked in HEPTANE
(see Vehicle: Parts and ingredients for the repai-
MANUAL REAR WINDOW WINDER rwork) (04B, Consumables - Products).
a Remove the rear side door manual window winder a Always replace the sealing mastic with A BEAD OF
handle. PREFORMED SEALING MASTIC (see Vehicle:
Parts and ingredients for the repairwork) (04B,
Consumables - Products).
a Reapply the new BEAD OF PREFORMED SEA-
LING MASTIC on the rear side door trim.
a Check the condition of the clips on the rear side door
trim and replace them if necessary.
72A-3
SIDE OPENING ELEMENT TRIM
Rear side door trim: Removal - Refitting 72A
- the pull handle (2) ,
- the rear side door interior handle (see Interior
door handle on rear side door: Removal - Refit-
ting) (51A, Side opening element mechanisms).
141537
a Refit the manual window winder handle for the rear
side door in a vertical position with the button at the
bottom.
72A-4
NON-SIDE OPENING ELEMENTS TRIM
Boot lid lining: Removal - Refitting 73A
REMOVAL
133601
a Remove:
- the clips (1) ,
- the boot lid trim.
REFITTING
73A-1
FRONT SEAT FRAMES AND MECHANISMS
Front seat frame: Removal - Refitting 75A
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Essential equipment
a Remove:
diagnostic tool
- the front seat lower covers (see 77A, Front seat
trim, Front seat lower cover: Removal - Refit-
FRONT SIDE AIRBAG ting, page 77A-7) ,
REFITTING
75A-1
FRONT SEAT FRAMES AND MECHANISMS
Front seat frame: Removal - Refitting 75A
- the front seat base trim (see 77A, Front seat trim,
Front seat base trim: Removal - Refitting, page
77A-1) ,
- the front seatback trim (see 77A, Front seat trim,
Front seatback trim: Removal - Refitting, page
77A-5) ,
- the front headrest (see 79A, Seat components,
Front headrest: Removal - Refitting, page 79A-
1) ,
- the front seat lower covers (see 77A, Front seat
trim, Front seat lower cover: Removal - Refit-
ting, page 77A-7) .
II - FINAL OPERATION
a Refit the complete front seat (see 75A, Front seat
frames and mechanisms, Complete front seat:
Removal - Refitting, page 75A-13) .
75A-2
FRONT SEAT FRAMES AND MECHANISMS
Front seat base frame: Removal - Refitting 75A
REMOVAL
Essential equipment
I - REMOVAL PREPARATION OPERATION
diagnostic tool
new front seatback 13 N.m a Disconnect the battery (see Battery : Removal -
Refitting) (80A, Battery).
frame nuts
FRONT SIDE AIRBAG - the compete front seat (see 75A, Front seat fra-
mes and mechanisms, Complete front seat: Re-
a moval - Refitting, page 75A-13) ,
IMPORTANT - the front seat lower casings (see 77A, Front seat
Consult the safety and cleanliness advice and trim, Front seat lower cover: Removal - Refit-
operation recommendations before carrying out ting, page 77A-7) ,
any repair (see Airbag and Pretensioners: Pre-
- the front seat base trim (see 77A, Front seat trim,
cautions for repair) (88C, Airbags and preten-
Front seat base trim: Removal - Refitting, page
sioners).
77A-1) ,
- the front seat runners (see 75A, Front seat frames
IMPORTANT and mechanisms, Front seat runner: Removal -
To avoid any risk of triggering when working on Refitting, page 75A-11) ,
or near a pyrotechnic component (airbags or pre- - the front seat belt buckle stalk (see Front seat belt
tensioners), lock the airbag computer using the buckle: Removal - Refitting) (88C, Airbags and
diagnostic tool. pretensioners).
When this function is activated, all the trigger
lines are inhibited and the airbag warning light on
the instrument panel lights up continuously (igni-
tion on).
IMPORTANT
Never handle the pyrotechnic systems (preten-
sioners or airbags) near to a source of heat or
naked flame - they may be triggered.
141649
75A-3
FRONT SEAT FRAMES AND MECHANISMS
Front seat base frame: Removal - Refitting 75A
II - OPERATION FOR REMOVAL OF PART
CONCERNED
FIXED SUBFRAME
133925
133738
a Remove:
- the front seatback frame bolts (2) ,
- the front seat base frame.
133926
a Remove:
75A-4
FRONT SEAT FRAMES AND MECHANISMS
Front seat base frame: Removal - Refitting 75A
- the front seat base frame.
REFITTING
FIXED SUBFRAME
a Refit: III - FINAL OPERATION
- the front seat base frame, a Refit:
- the noise-reducing ring. - the side retaining guides (1) ,
a Tighten to torque: - the front seat belt buckle (see Front seat belt buc-
kle: Removal - Refitting) (88C, Airbags and pre-
- the new front seatback frame nuts (13 N.m) (6) ,
tensioners),
- the new front seatback frame bolt (18 N.m) (3) .
- the front seat runners (see 75A, Front seat frames
a Refit the plastic ring (5) . and mechanisms, Front seat runner: Removal -
Refitting, page 75A-11) ,
- the front seat base trim (see 77A, Front seat trim,
Front seat base trim: Removal - Refitting, page
77A-1) ,
- the front seat lower casings (see 77A, Front seat
trim, Front seat lower cover: Removal - Refit-
ting, page 77A-7) ,
- the entire front seat (see 75A, Front seat frames
and mechanisms, Complete front seat: Remo-
val - Refitting, page 75A-13) .
75A-5
FRONT SEAT FRAMES AND MECHANISMS
Front seat base frame: Removal - Refitting 75A
FRONT SIDE AIRBAG
a Connect the battery (see Battery : Removal - Refit-
ting) (80A, Battery).
a Unlock the airbag computer using the diagnostic
tool (see Fault finding - Replacement of compo-
nents) (88C, Airbags and pretensioners).
75A-6
FRONT SEAT FRAMES AND MECHANISMS
Front seatback frame: Removal - Refitting 75A
REMOVAL
Essential equipment
I - REMOVAL PREPARATION OPERATION
diagnostic tool
75A-7
FRONT SEAT FRAMES AND MECHANISMS
Front seatback frame: Removal - Refitting 75A
II - OPERATION FOR REMOVAL OF PART
CONCERNED
FIXED SUBFRAME
133922
133739
a Remove:
- the front seatback frame bolts (1) ,
- the front seatback frame.
133923
a Remove:
75A-8
FRONT SEAT FRAMES AND MECHANISMS
Front seatback frame: Removal - Refitting 75A
- the front seatback frame.
REFITTING
FIXED SUBFRAME
a Refit: III - FINAL OPERATION
a Refit:
- the front seat base trim (see 77A, Front seat trim,
Front seat base trim: Removal - Refitting, page
77A-1) ,
75A-9
FRONT SEAT FRAMES AND MECHANISMS
Front seatback frame: Removal - Refitting 75A
- the front headrest (see 79A, Seat components,
Front headrest: Removal - Refitting, page 79A-
1) .
75A-10
FRONT SEAT FRAMES AND MECHANISMS
Front seat runner: Removal - Refitting 75A
REMOVAL
Essential equipment
I - REMOVAL PREPARATION OPERATION
diagnostic tool
IMPORTANT a Remove:
Consult the safety and cleanliness advice and - the compete front seat (see 75A, Front seat fra-
operation recommendations before carrying out mes and mechanisms, Complete front seat: Re-
any repair (see Airbag and Pretensioners: Pre- moval - Refitting, page 75A-13) ,
cautions for repair) (88C, Airbags and preten-
sioners). - the front seat lower casings (see 77A, Front seat
trim, Front seat lower cover: Removal - Refit-
ting, page 77A-7) ,
IMPORTANT - the front seat belt buckle stalk (see Front seat belt
To avoid any risk of triggering when working on buckle: Removal - Refitting) (88C, Airbags and
or near a pyrotechnic component (airbags or pre- pretensioners).
tensioners), lock the airbag computer using the
diagnostic tool.
When this function is activated, all the trigger
lines are inhibited and the airbag warning light on
the instrument panel lights up continuously (igni-
tion on).
IMPORTANT
Never handle the pyrotechnic systems (preten-
sioners or airbags) near to a source of heat or
naked flame - they may be triggered.
75A-11
FRONT SEAT FRAMES AND MECHANISMS
Front seat runner: Removal - Refitting 75A
II - OPERATION FOR REMOVAL OF PART II - REFITTING OPERATION FOR PART
CONCERNED CONCERNED
133940
139548
- the front seat belt buckle (see Front seat belt buc-
kle: Removal - Refitting) (88C, Airbags and pre-
tensioners),
141648
- the front seat lower casings (see 77A, Front seat
trim, Front seat lower cover: Removal - Refit-
a Remove:
ting, page 77A-7) ,
- the front seat runner nuts (1) , - the entire front seat (see 75A, Front seat frames
and mechanisms, Complete front seat: Remo-
- the front seat runners. val - Refitting, page 75A-13) .
75A-12
FRONT SEAT FRAMES AND MECHANISMS
Complete front seat: Removal - Refitting 75A
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
Essential equipment
Tightening torquesm
IMPORTANT
Consult the safety and cleanliness advice and
operation recommendations before carrying out
any repair (see Airbag and Pretensioners: Pre-
cautions for repair) (88C, Airbags and preten-
sioners).
IMPORTANT
To avoid any risk of triggering when working on
or near a pyrotechnic component (airbags or pre-
tensioners), lock the airbag computer using the 133636
diagnostic tool.
a Remove:
When this function is activated, all the trigger
- the blanking covers (1) ,
lines are inhibited and the airbag warning light on
the instrument panel lights up continuously (igni- - the front seat nuts (2) .
tion on).
Never handle the pyrotechnic systems (preten- a Tilt the front seat backwards.
sioners or airbags) near to a source of heat or a Disconnect the connector for the front seat.
naked flame - they may be triggered.
REMOVAL REFITTING
75A-13
FRONT SEAT FRAMES AND MECHANISMS
Complete front seat: Removal - Refitting 75A
133579 133579
a Check that the spacers (3) are present and correctly a Torque tighten in the order (1) , (2) , (3) (4) the new
clipped on to the floor. front seat nuts (25 N.m) (2) .
a Refit the blanking covers (1) .
Note:
If a spacer is damaged, replace it with a new FINAL OPERATION
spacer.
FRONT SIDE AIRBAG
II - REFITTING OPERATION FOR PART a Connect the battery (see Battery : Removal - Refit-
CONCERNED ting) (80A, Battery).
a Refit the front seat. a Unlock the airbag computer using the diagnostic
tool (see Fault finding - Replacement of compo-
nents) (88C, Airbags and pretensioners).
FRONT SIDE AIRBAG, and FRONT SEAT WITH
HEATING
a Connect the front seat connector.
75A-14
REAR SEAT FRAMES AND MECHANISMS
Rear bench seatback: Removal - Refitting 76A
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Tightening torquesm
REMOVAL
133672
a Remove the bolt (2) .
133684
a Remove:
- the bolts (1) , 141653
- the ISOFIX seat retaining cross member. a Tilt the universal joint of the anti-release bolt.
76A-1
REAR SEAT FRAMES AND MECHANISMS
Rear bench seatback: Removal - Refitting 76A
133674 141654
a Unclip the rear bench seatback from the noise-redu- a Check the condition of the noise-reducing bearings
cing bearings. (4) .
a Remove the rear bench seatback at (3) .
Note:
REFITTING If a noise-reducing bearing has deteriorated,
replace the noise-reducing bearing with a new
I - REFITTING PREPARATION OPERATION one.
a parts always to be replaced: Rear bench seat a Torque tighten the new bolts of the rear bench
seatback mounting on body (70,13,02,16). seatback (21 N.m) (2) .
a Fold back:
76A-2
REAR SEAT FRAMES AND MECHANISMS
Rear bench seat base: Removal - Refitting 76A
REMOVAL REFITTING
141655
a Tilt the rear bench seat base (1) .
133671
a Put the rear bench seat base in the "half-way" posi-
tion as illustrated above.
a Remove the rear bench seat base at (2) .
76A-3
REAR SEAT FRAMES AND MECHANISMS
Rear bench seat mechanism: Removal - Refitting 76A
REAR BENCH SEAT
II - OPERATION FOR REMOVAL OF PART
Essential special tooling CONCERNED
Car. 1363 Set of trim removal levers.
1 - Rear bench seatback unlocking control
Tightening torquesm
REMOVAL
133750
a Unclip the rear bench seatback unlocking control at
(1) using the tool (Car. 1363).
76A-4
REAR SEAT FRAMES AND MECHANISMS
Rear bench seat mechanism: Removal - Refitting 76A
REAR BENCH SEAT
2 - Rear bench seatback striker panel II - FINAL OPERATION
133573
a Remove:
- the nuts of the rear bench seatback striker panel
(2) ,
- the striker panels of the rear bench seatback.
Note:
The locks of the rear bench seatback are welded
onto the frame. The Parts Department does not
sell the locks separately.
REFITTING
76A-5
FRONT SEAT TRIM
Front seat base trim: Removal - Refitting 77A
a Remove:
Essential special tooling
- the compete front seat (see 75A, Front seat fra-
Car. 1363 Set of trim removal levers. mes and mechanisms, Complete front seat: Re-
moval - Refitting, page 75A-13) ,
Car. 1521 Clip crimping pliers.
- the front seat lower casings (see 77A, Front seat
Essential equipment trim, Front seat lower cover: Removal - Refit-
ting, page 77A-7) .
diagnostic tool
IMPORTANT
Consult the safety and cleanliness advice and
operation recommendations before carrying out
any repair (see Airbag and Pretensioners: Pre-
cautions for repair) (88C, Airbags and preten-
sioners).
IMPORTANT
To avoid any risk of triggering when working on
or near a pyrotechnic component (airbags or pre-
tensioners), lock the airbag computer using the
diagnostic tool.
When this function is activated, all the trigger
lines are inhibited and the airbag warning light on 133590
the instrument panel lights up continuously (igni- a Unclip:
tion on).
- the trim using the tool (Car. 1363),
REMOVAL
77A-1
FRONT SEAT TRIM
Front seat base trim: Removal - Refitting 77A
141658
a Cut the clips on the front seatback trim (2) .
FRONT SEAT WITH HEATING a Cut the clips on the front seat base trim (4) .
133731
a Disconnect the connector (3) .
133737
a Remove the clips from the front seat base trim (5)
using the tool (Car. 1363).
77A-2
FRONT SEAT TRIM
Front seat base trim: Removal - Refitting 77A
FIXED SUBFRAME
133938
a Remove the « foam - trim » assembly from the front
141657
seat base (8) .
a Remove the clip (5) from the front seat base trim
using the tool (Car. 1363) (on each side).
133730
77A-3
FRONT SEAT TRIM
Front seat base trim: Removal - Refitting 77A
II - REFITTING OPERATION FOR PART
CONCERNED
a Fit new clips on the seat trim (9) using the tool (Car.
1521).
a Fit the new clips on the seat trims (6) using the tool
(Car. 1521).
a Fit new clips on the seat trim (4) and (1) using the
tool (Car. 1521).
a Refit:
77A-4
FRONT SEAT TRIM
Front seatback trim: Removal - Refitting 77A
a Remove:
Essential special tooling
- the compete front seat (see 75A, Front seat fra-
Car. 1521 Clip crimping pliers. mes and mechanisms, Complete front seat: Re-
moval - Refitting, page 75A-13) ,
Essential equipment - the front seat lower casings (see 77A, Front seat
trim, Front seat lower cover: Removal - Refit-
diagnostic tool ting, page 77A-7) ,
- the front seat headrest (see 79A, Seat compo-
FRONT SIDE AIRBAG nents, Front headrest: Removal - Refitting,
page 79A-1) ,
a
- the front seat headrest guides (see 79A, Seat
IMPORTANT components, Front seat headrest guide: Remo-
Consult the safety and cleanliness advice and val - Refitting, page 79A-2) .
operation recommendations before carrying out
any repair (see Airbag and Pretensioners: Pre- II - OPERATION FOR REMOVAL OF PART
cautions for repair) (88C, Airbags and preten- CONCERNED
sioners).
IMPORTANT
To avoid any risk of triggering when working on
or near a pyrotechnic component (airbags or pre-
tensioners), lock the airbag computer using the
diagnostic tool.
When this function is activated, all the trigger
lines are inhibited and the airbag warning light on
the instrument panel lights up continuously (igni-
tion on).
IMPORTANT
Never handle the pyrotechnic systems (preten-
sioners or airbags) near to a source of heat or
naked flame - they may be triggered.
133921
a Cut the clips on the front seatback trim (1) .
REMOVAL
77A-5
FRONT SEAT TRIM
Front seatback trim: Removal - Refitting 77A
REFITTING
Note:
For seats equipped with a chest-level side air-
bag, ONLY use second generation seatback trim
141658 clips (part number 77 01 047 751).
a Cut the clips on the front seatback trim (2) .
141765
FRONT SIDE AIRBAG
a Lift the front seatback trim and cut the clips (3) as
necessary. a Connect the battery (see Battery : Removal - Refit-
ting) (80A, Battery).
a Cut the clips on the front seatback trim (3) .
a Unlock the airbag computer using the diagnostic
a Remove the front seatback trim. tool (see Fault finding - Replacement of compo-
nents) (88C, Airbags and pretensioners).
77A-6
FRONT SEAT TRIM
Front seat lower cover: Removal - Refitting 77A
2 - Front seat base exterior casing
Note:
It is not necessary to remove the front seats in
order to remove the front seat base casings.
REMOVAL
141652
a Remove the bolt (4) .
141651
a Remove the bolt (1) .
141652
a Remove the front seat base exterior casing at (5)
and (6) .
141651
a Remove the front seat base interior casing at (2) and
(3) .
77A-7
FRONT SEAT TRIM
Front seat lower cover: Removal - Refitting 77A
FRONT SEAT WITH HEATING
133587
a Disconnect the connector (7) from the front seat
heated pad.
REFITTING
77A-8
REAR SEAT TRIM
Rear bench seat base trim: Removal - Refitting 78A
Essential special tooling
REMOVAL
78A-1
REAR SEAT TRIM
Rear bench seat base trim: Removal - Refitting 78A
II - OPERATION FOR REMOVAL OF PART
CONCERNED
141641
a Cut the seat trim clips (1) .
a Remove the rear bench seat base « foam - trim »
assembly.
141638
141639
141640
78A-2
REAR SEAT TRIM
Rear bench seat base trim: Removal - Refitting 78A
SEAT WITHOUT ISOFIX
141645
a Cut the seat trim clips (1) .
141642 a Remove the rear bench seat base « foam - trim »
assembly.
141643
141644
78A-3
REAR SEAT TRIM
Rear bench seat base trim: Removal - Refitting 78A
REFITTING
141660
141661
78A-4
REAR SEAT TRIM
Rear bench seat single unit seatback trim: Removal - Refitting 78A
Essential special tooling
REMOVAL
133754
a Open the zip fasteners (1) . 141656
a Unclip the clips (2) using the tool (Car. 1363). a Unclip the rear bench seatback unlocking control at
(3) using the tool (Car. 1363).
a Cut the seat trim clips.
78A-5
REAR SEAT TRIM
Rear bench seat single unit seatback trim: Removal - Refitting 78A
141662
108479
a Unclip the rear bench seat headrest guides at (4)
using two flat-blade screwdrivers.
a Remove the rear bench seat headrest guides.
141754
133755 141663
a Cut the seat trim clips (5) . a Cut the seat trim clips (6) , (7) , and (8) .
a Remove the rear bench seatback « trim - foam » as- a Remove the trim from the seatback of the single unit
sembly. rear bench seat.
78A-6
REAR SEAT TRIM
Rear bench seat single unit seatback trim: Removal - Refitting 78A
REFITTING
78A-7
SEAT COMPONENTS
Front headrest: Removal - Refitting 79A
REMOVAL REFITTING
141797
a
IMPORTANT
Do not swap the positions of the headrest gui-
des.
141647 Ensure that each headrest guide is correctly
positioned on the front seatback frame.
Right-hand side: headrest guide with big unloc-
king button,
Left-hand side: headrest guide with small unloc-
king button.
IMPORTANT
To prevent the headrest coming away from the
guide during a collision, check that headrest
guide locking system is functioning correctly.
133680
a Press the headrest guide unlocking buttons (1) .
a Remove the front headrest at (2) .
79A-1
SEAT COMPONENTS
Front seat headrest guide: Removal - Refitting 79A
REMOVAL II - OPERATION FOR REMOVAL OF PART
CONCERNED
Note:
The headrest guides can be removed without
removing the front seatback trim.
141646
108479
a Partially detach the front seatback trim in order to
access the clips of the headrest guides.
a Unclip the front seat headrest guides (1) using a flat-
blade screwdriver at (2) .
a Remove the front seat headrest guides.
79A-2
SEAT COMPONENTS
Front seat headrest guide: Removal - Refitting 79A
REFITTING
141797
IMPORTANT
Do not swap the positions of the headrest gui-
des.
Ensure that each headrest guide is correctly
positioned on the front seatback frame.
Right-hand side: headrest guide with big unloc-
king button,
Left-hand side: headrest guide with small unloc-
king button.
II - FINAL OPERATION
IMPORTANT
To prevent the headrest coming away from the
guide during a collision, check that headrest
guide locking system is functioning correctly.
79A-3
SEAT COMPONENTS
Heated seat cover: Removal - Refitting 79A
FRONT SEAT WITH HEATING
a Remove:
Essential equipment - the compete front seat (see 75A, Front seat fra-
mes and mechanisms, Complete front seat: Re-
diagnostic tool moval - Refitting, page 75A-13) ,
- the front seat base casings (see 77A, Front seat
trim, Front seat lower cover: Removal - Refit-
FRONT SIDE AIRBAG ting, page 77A-7) ,
a - the front seat headrest (see 79A, Seat compo-
nents, Front headrest: Removal - Refitting,
IMPORTANT page 79A-1) ,
To avoid any risk of damaging the systems, apply
- the front seat headrest guides (see 79A, Seat
the safety and cleanliness instructions and ope-
components, Front seat headrest guide: Remo-
ration recommendations before carrying out the
val - Refitting, page 79A-2) ,
repair (see Airbag and Pretensioners: Precau-
tions for repair) (88C, Airbag and pretensio- - the front seat base trim (see 77A, Front seat trim,
ners). Front seat base trim: Removal - Refitting, page
77A-1) ,
- or the front seatback trim (see 77A, Front seat
IMPORTANT trim, Front seatback trim: Removal - Refitting,
To avoid any risk of triggering when working on page 77A-5) .
or near a pyrotechnic component (airbags or pre-
tensioners), lock the airbag computer using the
diagnostic tool.
When this function is activated, all the trigger
lines are inhibited and the airbag warning light on
the instrument panel lights up continuously (igni-
tion on).
IMPORTANT
Never handle the pyrotechnic systems (preten-
sioners or airbags) near to a source of heat or
naked flame - they may be triggered.
REMOVAL
79A-4
SEAT COMPONENTS
Heated seat cover: Removal - Refitting 79A
FRONT SEAT WITH HEATING
II - OPERATION FOR REMOVAL OF PART REFITTING
CONCERNED
Note:
Check the condition of the foam of the front seat
base and front seatback. If it has deteriorated,
replace the foam.
a Detach the heated pad. - the front seat headrest guides (see 79A, Seat
components, Front seat headrest guide: Remo-
val - Refitting, page 79A-2) ,
WARNING
- the front seat headrest (see 79A, Seat compo-
To avoid any damage to the foam, detach the nents, Front headrest: Removal - Refitting,
heated pad carefully. page 79A-1) ,
79A-5
SEAT COMPONENTS
Heated seat cover: Removal - Refitting 79A
FRONT SEAT WITH HEATING
- the front seat lower casings (see 77A, Front seat
trim, Front seat lower cover: Removal - Refit-
ting, page 77A-7) ,
- the entire front seat (see 75A, Front seat frames
and mechanisms, Complete front seat: Remo-
val - Refitting, page 75A-13) .
79A-6