Professional Documents
Culture Documents
___________________________________________________________________________
29 NOVEMBER 2021
MMJ10403 – TERMODINAMIK I
UJIAN 1
MASA: 1½ JAM
___________________________________________________________________________
Please make sure that this question paper has FIVE (5) printed pages including this front page before
you start the examination.
Set A
Question 1
You are required to draw back Table 1 and fill in the blanks by calculating the properties for water
(H2O) using the attached property table. Indicate all the states on a single P-v diagram. Show your
calculations and analyses clearly. Take a to be the last digit of your matrix number as shown by the
sample.
Table 1
State T (°C) P (kPa) Quality, x v (m3/kg) h (kJ/kg) Phase
1 150 + a 0.3
2 180 + a 0.1750
3 50 + a 3100
Sample
If XXXXX0003 If XXXXX0009-5
So ‘a’ is 3 So ‘a’ is 9
(8 marks)
Question 2
a. A 2 m3 rigid tank filled with water initially at 175 kPa and having specific enthalpy of 2300
kJ/kg is heated until the pressure reaches 400 kPa. Determine:
i. Total mass of water in the tank in kg.
ii. Final temperature of water in °C.
Show the states and processes in a P-v diagram.
(6 marks)
b. A piston-cylinder device contains 0.8 kg of steam with initial conditions of 300°C and 0.2
MPa. The steam is cooled at a constant pressure until 1/3 of the total mass of the steam
condenses. Determine:
i. The final temperature of steam in °C.
ii. The volume change in m3.
Show the process in a T-v diagram.
(6 marks)
TAKE END OF MATRIX NUMBER = 0