Professional Documents
Culture Documents
2014 TRANSMISSION
1 - LOCK
2 - ACC
3 - ON
4 - START
If the shifter cannot be shifted out of Park or can be shifted out of Park without
depressing the brake pedal, follow diagnostics procedure below.
Yes
Refer to the appropriate engine or brake system and perform the
appropriate diagnostic procedure(s).
No
Go To 2
2. BRAKE SWITCH
1. With the scan tool select "PCM Module" and "Data Display". Read the
Brake Switch state.
2. Check for change of state by pushing and releasing the brake pedal.
Does the brake switch change states when the pedal is pushed and
released?
Yes
Go To 3
No
Trace and repair the Brake Switch circuit(s) as necessary.
Perform the BODY VERIFICATION TEST. Refer to
STANDARD PROCEDURE .
3. BRAKE TRANSMISSION SHIFT INTERLOCK (BTSI) TEST
1. Turn the ignition off.
2. Remove the necessary parts of the center console to visually see the
BTSI Lever on the shifter.
3. Turn the ignition on.
4. While observing the BTSI Lever on the shifter, push and release the
brake pedal several times.
Did the BTSI Lever move when the brake pedal was pushed and
released?
Yes
Refer to DIAGNOSIS AND TESTING and check for mechanical
shifter issues.
No
Go To 4
4. BRAKE TRANSMISSION SHIFT INTERLOCK (BTSI) CIRCUIT
TEST
3. Connect a 12 volt test light between the (Z) Ground and the (K321)
Brake Transmission Shift Interlock Solenoid Unlock circuits.
4. Turn the ignition on.
5. While observing the test light, push and release the brake pedal.
Does the test light illuminate brightly when the brake pedal is pushed?
Yes
Replace the shifter in accordance with the Service Information.
Perform the Final Verification Test.
No
Trace and repair the open (Z) Ground or the Open (K321) Brake
Transmission Shift Interlock Solenoid Unlock circuits as
necessary.
Perform the Final Verification Test.