Professional Documents
Culture Documents
NTB02 053
NTB02 053
SERVICE INFORMATION
This bulletin introduces 3M Plastic Polish # 39010, which should be used to clean and
polish headlamps with cloudy, hazy, or other poor appearance.
SERVICE PROCEDURE
Use 3M Plastic Polish (# 39010) to polish the headlamp lens(es) as follows:
1. Remove any dust, dirt, or debris from the headlamp lens using a soft damp cloth.
2. Dispense a quarter-size drop of 3M Plastic Polish onto a clean, dry, soft, cotton terry
cloth towel (see Figure 1a).
3M Plastic
Polish #39010 Apply to headlamp
C or
390
F
olo
P LA
O S
d r&
P
LI T
la
3M
motion
st
S IC
ic
s
Clean, dry,
soft cotton
terry cloth
towel
TP020118
Figure 1a Figure 1b
3. Apply the polish to the lens using a firm, circular motion (see Figure 1b).
4. Rub until dry.
5. Use a clean, dry section of cloth to remove the haze.
6. Repeat as necessary.
NOTES:
• Material Safety Data Sheets (MSDS) for 3M Plastic Polish™ # 39010 are available via
fax or email by calling 3M’s 24-hour “3M Helps” Customer Service line at
1-800-364-3577 OR (651) 737-6501.
• This 3M product can be locally sourced through the following distributors:
R.S. Hughes – 1-877-774-8443
Granger Industrial Supplies – 1-800-323-0620
1/1