Professional Documents
Culture Documents
Name of the
Bidder/
Bidding Firm /
Company :
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else th
NUMBER # TEXT # T
E
Sl. Item Description X
I
No. T
t
e
#
m
1 2 ###
C
1 Civil Work I
o
d
t
3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation e
I
e
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and tm
/
ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus e
excavated soil as directed, within a lead of 50 m. (HSR 4.14) m
M
C
a
ok
C
dI
e
4 Filling available excavated earth (excluding rock) in trenches, cum plinth, sides of foundations etc. in
o
layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up et
d
to 50 m and lift up to 1.5 m. (HSR 4.32) e
e0
m
1
0
C
2
o
d
e
0
5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and I
shuttering - All work below plinth level and up to Floor IV level:. (HSR 6.1) t
e
5.1 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded cum stone aggregate 20 mm nominal size) (HSR Im
6.1.2) t
eC
5.2 1:4:8 (1 cement : 4 coarse sand (zone-Ill): 8 cum graded stone aggregate 40 mm nominal size) (HRS Im
o
6.1.6) td
eC
e
6 Providing and laying damp-proof course with cement concrete 1 :2:4 (1 cement : 2 coarse Im
o
sand (zone-Ill): 4 graded stone aggregate 12.5mm nominal size) (HRS 6.8) t
d0
eC
6.1 50 mm thick (HRS 6.8.1) e4I
m
ot
de0
7 Providing & applying a coat of residual petroleum bitumen of sqm grade of VG-1 O of approved IC
e5
quality using 1. 7kg per square metre on damp proof course after cleaning the surface with brushes and m to
finally with apiece of cloth lightly soaked in kerosene oil. (HRS 6.10) ed
0C
m
8 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost eI6o
of centering, shuttering, finishing and reinforcement- All work up to plinth level: (HRS 6.14) tC
d0
eoe
7m
8.1 1 : 1. 5: 3 ( 1 cement : 1. 5 coarse sand (zone-Ill): 3 cum graded stone aggregate 20 mm nominal size) dI
0e
(HRS 6.14.1) tC
8
eo
0m
9 Reinforced cement concrete work in walls (any thickness), including attached pilasters, Id
9
buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. te
above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and C
e
reinforcement : (HRS 6.15) o1
m
d0
e
C
o
1d
1e
1
9.1 1:1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size) (HRS I
6.15.1) t
e
10 Reinforced cement concrete work in beams, suspended floors, roofs having slope up Im
to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral t
stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, eC
finishing and reinforcement with 1: 1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone m o
aggregate 20 mm nominal size). (HRS 6.16) d
e
C
o
11 Centering and shuttering including strutting, propping etc. and removal of form for (HRS 6.30) I1d
te3
e
11.1 Foundations, footings, bases of columns, etc. for sqm mass concrete (HRS 6.30.1) Im
1
t4
11.2 Walls (any thickness) including attached pilasters, sqm buttresses, plinth and string courses etc. (HRS eC
I
6.30.2) m
to
de
11.3 Suspended floors, roofs, landings, balconies and (HRS 6.30.3) IC
em
to
11.4 Shelves (Cast in situ) (HRS 6.30.4) eId1
C
tm
e5o
11.5 Lintels, beams, plinth beams, girders, bressumers sqm and cantilever (HRS 6.30.5) Ie
dt
C
m
1e
11.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm (HRS 6.30.6) Ieo6
tm
dC
11.7 Stairs, (excluding landings) except spiral-staircases (HRS 6.30.7) 1Ie
o7
C
tm
dI
11.8 Extra for shuttering in circular work (20% of respective centering and shuttering items) (HRS 6.30.14) oe1e
td
C
m
8e
oe1
m
d9
C
oe2
C
0d
o
e2
d
12 Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including I
straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, t
chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note:- e
Reinforcement shall be measured in length including hooks, if any, separately for different diameters as m
actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars,
chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured C
and cost of these items shall be deemed to be included in the rates for reinforcement. (HRS 6.33) o
d
e
12.1 Thermo-Mechanically Treated bars of grade Fe- 500D kg or more. (HRS 6.33.6) 2I
4t
13 Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including
straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, e
m
chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level.
Note:- Reinforcement shall be measured in length including hooks, if any, separately for different
C
diameters as actually used in work , excluding overlaps. Wastage, over1aps, couplings, welded joints,
o
spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not
be measured and cost of these items shall be deemed to be included in the rates for reinforcemen (HRS d
e
6.34)
2
5
35.1 With average thickness of 120mm and minimum thickness at khurra as 65mm (HRS 28.17.1) I
t
36 Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core eI
of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with m t
vertical grains or cross bands and face veneers on both faces of shutters. (HRS 12.36) e
C
m
o
dC
eo
d
36.1 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws (HRS 12.36.1) I
t
e
37 PLUMBING WORKS Im
t
38 SANITARY INSTALLATIONS eIC
tm
o
39 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with100 mm sand cast Iron P Ied
or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually C
tm
e
controlled device (handle lever)conforming to IS : 7231, with all fittings and fixtures complete, eo
including cutting and making good the walls and floors wherever required: (HRS 22.22) d7
C
m
oe3
d
C
39.1 White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 7oeI
(HRS22.22.1) 4dt
e7e
40 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass I5
m
waste of standard pattern, including painting ofmfittings and brackets, cutting and making good the t7
walls wherever require: (HRS 22.1) e6
C
m
40.1 White vitreous chinaware Wash basin size 630x450 mm with pair of 15 mm C. P. brass pillar oI
taps (HRS 22.1.1) dt
C
ee
41 Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS:13983 with Io
C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting m
td7
and making good the walls wherever required. (HRS 22.1) e7
C
m
41.1 Kitchen sink with drain board (HRS 22.10.1) Io7
td8C
41.2 510x1040 mm bowl depth 250 mm (HRS 22.10.1.1) Ie
tom
ed7
em
9
C
o8
C
d0
oe
d
42 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) I
complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and t
washers complete. (HRS 22.209) e
m
43 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised I
aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long tC
screws, rawl plugs etc., complete. (HRS 22.211) eo
m
d
44 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass Ie
screws with concealed fittings arrangement of approved quality and colour. (HRS 22.119) tC
eo8
m
d3
44.1 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, Ie
weighing not less than 190 gms. (HRS 22.119.2) tC
eo8
45 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and m
Id4
shapes, weighing not less than 60 gms. (HRS 22.121) te
eC
46 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste Io
m
8t
fittings complete. (HRS 22.14) d5
ee
46.1 Semi rigid pipe (HRS 22.14.1) C
Im
ot
46.2 a) 40 mm dia (HRS 22.14.2) I8
de
tC
6m
e
47 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 (HRS oIe
22.104) tdm
8C
e
47.1 15 mm nominal bore. (HRS 22.104.1) 7Io
m
C
tdo8
48 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards IeC
d8
and weighing not less than 690 gms. (HRS 22.106) tm
oe
e8d
9m
C
e9
o0
C
d9
oe
48.1 15 mm nominal bore. (HRS 22.106.1) I
t
49 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and Ie
quality as per direction of Engineer-in-charge. (HRS 22.109) tm
e
50 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per Im
the direction of Engineer-in-charge. (HRS 22.15) C
t
oe
51 Providing and fixing white vitreous chinaware flat back or wall comer type lipped front urinal basin C Idm
of 430x260x350 mm and 340x410x265 mm sizes respectively with flushing cistern with standard toe
flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting edC
of fittings and brackets, cutting and making good the walls and floors wherever (HRS 22.25) e9
m
o
4d
9C
e5
51.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern (HRS 22.25.1) oI
dt9
ee6
52 Providing and fixing soil, waste and vent pipes : (HRS 22.51) I
m
t
52.1 100mm dia (HRS 22.51.1) I9
et
7C
52.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS:3989 (HRS 22.51.1.2) m
Ie
ot
52.3 75mm diameter: (HRS 22.51.2) m
IdeC
52.4 Centrifugally cast (spun) iron socketed pipe as per IS:3989 (HRS 22.51.2.2) teIm
oC
edt
om
e9C
53 Providing and filling the joints with spun yarn, cement slurry and cement mortar 1 :2 ( 1 cement: 2 dI8
fine sand) in S.C.1./ C.I. Pipes: (HRS 22.52) oet
m
C
9d
eo9
em
C
53.1 75mm dia pipe (HRS 22.52.1) I1d
o0
te
d1C
0Ie
53.2 100mm dia pipe (HRS 22.52.2)
e0o
tm
11
de0
1e
C
m
20
o
3
54 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron I
(spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 t
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting e
holes and making good the walls etc. : (HRS 22.53) m
3
0
4
137 Providing and fixing of LED Luminaires BATTEN 20W LED Tube Light of Box Type I
Prewired Indoor Luminaire with Energy Efficient Electronic Ballast, with End Caps t
Complete as Required.(Technical Data - System power 20W, CRI ≥80, Power Factor ≥0.95, e
System Luminous Efficacy ≥100) with all required material and necessary connections. (HRS NS) m
C
o
138 Providing and fixing of LED Luminaires BATTEN 40W LED Tube Light of Box Type Id
Prewired Indoor Luminaire with Energy Efficient Electronic Ballast, with End te
Caps Complete as Required.(Technical Data - System power 40W, CRI ≥80, Power Factor e
≥0.95, System Luminous Efficacy ≥100) with all required material and necessary connections. (HRS NS) m 3
0
C
5
139 Supply & Installation of AC 230/250 volts, 50 HZ Wall Fan Including Providing Nuts, Bolts, & Other Io
Accessories as Required with all respect satisfaction of Engineer-in-charge. (HRS NS) td
ee
139.1 450 mm Dia Im
3t
0eC
140 Providing and Fixing of 20W LED Bracket Light fitting suitable for 20 Watt LED Light with all I
6m
ot
accessories as required with necessary connections. (HRS NS)
de
141 SUPPLY OF L.T. CABLE: em
IC
ot
142 Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Insulated Id3e
C
armoured cable conforming to IS:7098 (Part - I) complete with all Amendments etc. as Required tm
e0o
(Polycab/Havells/Finolx) e7
d
m
3e
C
143 3.5 C X 95 Sq.mm Al. XLPE armoured Cable. (HRS A) I
o0
tC
d83
eo
e0
m
d
9
e3
C
1
o3
0
d1
144 Providing architectural design, Structural design and services design including MEP along with Good for I
Construction drawings required for the construction of the Temple at SVSU Dudhola including vetting of t
structural drawings from the reputed Govt agency. (HRS NS) e
m
145 Spreader Link (Copper) suitable for 200 Amp to 250 Amp MCCB (HRS NS) I
tC
Total in Figures eo
d
m
e
Quoted Rate in Figures C
Quoted Rate in Words o3
d1
e3
3
1
4
Percentage BoQ 1
g from repute Govt agency, construction, finishing. electrical, sanitary, IT works and all other works
PRICE SCHEDULE
ng the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER # TEXT # NUMBER NUMBER # NUMBER #
4 5 6 53 54
#VALUE! #VALUE!
TOTAL AMOUNT
In Words
55
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
Please Enable Macros to View BoQ information
Q information