Professional Documents
Culture Documents
ecopoolV.3.3
user manual
Single-phase Single-phase with
ECO-POOL-230 100VA / 300VA transformer
ECO-POOL-B-230 ECO-POOL-230-T100
ECO-POOL-230-D ECO-POOL-B-230-T100
ECO-POOL-B-230-D ECO-POOL-230-T300
-B: Bluetooth, -D: with RCCB ECO-POOL-B-230-T300
-B: Bluetooth
Ed.4
Basic
Conexionado
connection diagrams
básico
Single-phase
Page 2
Three-phase
ECO-POOL 400-T100/T300
Page 3
Control module
Pilot lights:
1. Filtration program 1.
2. Filtration program 2.
3. Filtration ON.
1 4
4. Lighting program.
5. Auxiliary relay. 5
2
6. Current time. 6
7. Alarm / calibration.
3 7
FILTRATION LIGHTING
PROGRAM 1 PROGRAM
Page 4
Manual filtration & lighting control
HAnd OFF
Push over 4 seconds to start the Push to stop the swimming-pool pump.
swimming-pool pump. It will automatically start at the beginning
It will stop when the following of the following scheduled filtration.
scheduled filtration finishes.
Push 4” Push 4”
Push over 4 seconds to manually Push over 4 seconds to switch lighting off.
switch lighting on.
Reset
Reset
Resets any failure of the swimming-pool pump.
Push
OVERLOAD OVERLOAD
Page 5
Swimming-pool pump protection
Pump protection auto calibration test The device sets itself
at the 1st start-up.
To perform an automatic calibration:
(*)
(*) Once the value is confirmed, the pump sets itself during the first 8 running minutes.
See Annex 1 to perform the auto calibration test in pumps with variable frequency drives, or to cancel the underload protection.
Overload
For a proper protection of the swimming-pool pump, it is essential to have performed the auto calibration test.
Possible causes:
OVERLOAD • Pump not calibrated.
120% OVERLOAD LIMIT
• Pump blocked.
100% • Supply phase failure (only three-
OVERLOAD CALIBRATED OVERLOAD phase pumps).
Underload
For a proper protection of the swimming-pool pump, it is essential to have performed the auto calibration test.
Possible causes:
To cancel the underload protection, set the pump as with variable speed drive (see Annex 1).
Page 6
External control
Filtration ON/OFF Lighting ON/OFF
Page 7
Bluetooth (only “B” models)
DEVICE NAME
SOFTWARE CURRENT
BLUETOOTH VERSION RANGE
PIN CODE OPERATION NUMBER OF
HOURS PUMP STARTS
App interface
Pump
Pump alarm
Program 2
Lighting control
Programming
Page 8
Technical specifications
Reference
ECO-POOL-X-XXX-X-XXXX
T100: 100W transformer
T300: 300W transformer
D: RCCB
Size
ECO-POOL-230 ECO-POOL-230-D
Page 9
ECO-POOL-230-T-100 ECO-POOL-230-T300
ECO-POOL-400 ECO-POOL-400-D
ECO-POOL-400-T100/T300
Page 10
Annex 1
Auto calibration test in pumps with variable frequency drives, or to cancel the underload protection
Once the value is confirmed, the pump sets itself during the first 8 running minutes.
Channel A Channel B
push button push button
Supply
160...440VAC
Page 11
Page 12