Professional Documents
Culture Documents
Questions A B C D Answers
on No.
burr on
burr on burr on both
1 no burr blanking burr on both side
Components from a compound tool will have piercing side side
side
knock out
4 pins Springs none Springs
Compression shedders are activated by_______ mechanism
11 bending
Corner setting forming spring back vbending spring back
limited limited
12
bending
A soft cold rolled strip suitable for__________- forming limited drawing All of these All of these
In drawing very high blank holding force leads to
1
_______ in the component. Tearing Wrinkling Puckering Bending Wrinkling
In deep drawing small clearance results
2
in……………… Wrinkling Tearing Puckering None Tearing
6 _______press is suitable for drawing mechanical single action double action none double action
operation.
The area of the blank where very little side wall of the bottom of the
9 flange of the cup All of these All of these
deformation takes place during drawing is cup cup