Professional Documents
Culture Documents
0
GENERAL PHYSICS 1: MODULE 1
What is Physics?
The science in which matter and energy are studied both separately and in combination with
one another.
The science of nature, or that which pertains to natural objects, which deals with the laws and
properties of matter and the forces which act upon them.
Physics is one of the most fundamental of the sciences. Scientists of all disciplines use the ideas of
physics, including chemists who study the structure of molecules, paleontologists who try to
reconstruct how dinosaurs walked, and climatologists who study how human activities affect the
atmosphere and oceans. Physics is also the foundation of all engineering and technology. No engineer
could design a flat-screen TV, an interplanetary spacecraft, or even a better mousetrap without first
understanding the basic laws of physics.
The study of physics is also an adventure. You will find it challenging, sometimes frustrating,
occasionally painful, and often richly rewarding. If you’ve ever wondered why the sky is blue, how
radio waves can travel through empty space, or how a satellite stays in orbit, you can find the answers
by using fundamental physics. You will come to see physics as a towering achievement of the human
intellect in its quest to understand our world and ourselves.
Lesson 1
MEASUREMENTS AND UNITS
Accurate measurement is a vital tool for doing science, a consistent set of units for measurement is
necessary. Physicists throughout the world use the International System of Units (also called the SI
system). The SI system is basically the metric system, which is convenient because units of different size
are related by powers of 10. The system has physical standards for length, mass, and time. These are
called fundamental units because they have an actual physical standard.
second - the standard unit of time; denoted by "s" or, less commonly, "sec."
o defined as a fraction of the time it takes the earth to complete an orbit around the sun,
but has now been redefined in terms of the frequency of one type of radiation emitted by
a cesium-133 atom.
Meters, seconds, and kilograms are not the only unit entities.
1
GENERAL PHYSICS 1: MODULE 1
Speed is a derived unit, measured in meters per second (m/s). Derived units are units that are
expressed using combinations of the fundamental units.
The SI system is a decimal system. Prefixes are used to change SI units by powers of ten. The metric
units for all quantities use the same prefixes.
CONVERSION OF UNITS
Practice Exercises:
1. Convert 500 millimeters to meters.
The equivalency statement for millimeters and meters is 1000 mm = 1 m.
To convert 500 mm to m, we multiply 500 mm by a conversion factor that will cancel the
millimeter units and generate the meter units. This requires that the conversion factor has
meters in the numerator and millimeters in the denominator.
2. Convert 11 µg to mg.
When converting from one prefix to another, such as in this problem, it is usually easiest to
convert through the base unit. In this case, the base unit is grams, so we use the two
following equivalency statements:
1.0 x 10 6 μg=1 g 1 g=1 000 mg
The first conversion factor converts from micrograms to grams and the second conversion
factor converts from grams to milligrams.
SCIENTIFIC NOTATION
Scientific Notation is a special way of writing numbers:
Like this: scientific notation 700 = 7x102
Or this: scientific notation 4,900,000,000 = 4.9x109
It makes it easy to use big and small values.
700 = 7 × 100
and 100 = 102 (powers of 10)
so 700 = 7 × 102
Both 700 and 7 × 102 have the same value, just shown in different ways.
To figure out the power of 10, think "how many places do I move the decimal point?"
When the number is 10 or greater, the decimal point has to move to the left, and the power of 10
is positive.
When the number is smaller than 1, the decimal point has to move to the right, so the power of
10 is negative.
Examples:
0.0055 is written 5.5 × 10-3 3.2 is written 3.2 × 100
Because 0.0055 = 5.5 × 0.001 = 5.5 × 10-3 We didn't have to move the decimal point at all,
so the power is 100
But it is now in Scientific Notation.
Random errors are statistical fluctuations (in either direction) in the measured data due to the
precision limitations of the measurement device. Random errors usually result from the
experimenter’s inability to take the same measurement in exactly the same way to get exact the
same number.
Systematic errors, by contrast, are reproducible inaccuracies that are consistently in the same
direction. Systematic errors are often due to a problem which persists throughout the entire
experiment.
3
GENERAL PHYSICS 1: MODULE 1
Note that systematic and random errors refer to problems associated with making measurements.
Mistakes
made in the calculations or in reading the instrument are not considered in error analysis. It is assumed
that the experimenters are careful and competent!
Lesson 2
SCALAR AND VECTOR QUANTITIES
A scalar quantity is any quantity in physics that has magnitude, but not a direction associated with it.
Magnitude – A numerical value with units.
Examples: speed – 20 m/s
distance – 10 m
age – 15 years
heat – 1 000 calories
A vector is any quantity in physics that has both magnitude and direction.
Vectors are typically illustrated by drawing an ARROW above the symbol. The arrow is used to
convey direction and magnitude, ⃗v , ⃗x , a⃗ , ⃗
F.
Examples: velocity – 20 m/s, North
acceleration – 10 m/s2, East
force – 5 Newtons, West
APPLICATIONS OF VECTORS
VECTOR ADDITION – If 2 similar vectors point in the same direction, add them.
Example: A man walks 54.5 meters east, then another 30 meters east. Calculate his displacement
relative to where he started?
Notice that the SIZE of the arrow conveys MAGNITUDE and the
way it was drawn conveys DIRECTION.
4
GENERAL PHYSICS 1: MODULE 1
VECTOR SUBTRACTION - If 2 vectors are going in opposite directions, you SUBTRACT.
Example: A man walks 54.5 meters east, then 30 meters west. Calculate his displacement relative to
where he started?
NON-COLLINEAR VECTORS - When 2 vectors are perpendicular, you must use the Pythagorean theorem.
Example: A man walks 95 km, East then 55 km, north. Calculate his resultant displacement.
In the previous example, displacement was asked for and since it is a vector, we should include a
direction on out final answer.
Just putting North of East on the answer is NOT specific enough for the direction. We must find
the value of the angle.
To find the value of the angle we use a trigonometric function called TANGENT.
5
GENERAL PHYSICS 1: MODULE 1
So, the complete final answer is: 109.8 km, 30 degrees North of East (30° N of E)
Example:
Suppose a person walked 65 m, 25 degrees East of North. What were his horizontal and vertical
components? (Hint: Always make a right triangle)
To solve for components, we often use the trig functions sine and cosine.
Example:
A dog, searching for food wanders 35.0 meters, East then 20.0 meters, North. Frustrated, he
wanders another 12.0 meters, West then 6.0 meters, South. Calculate the dog's displacement.
Learning Tip: In solving problems with multiple vectors, you need to distinguish first the different components
with their corresponding axis in which the vectors are located. Always follow the Cartesian plane.
North (+ y-axis)
Diagram:
South (- y-axis)
x-axis components y-axis components
35.0 m, E → + 35.0 m 20.0 m, N → + 20.0 m
+
12.0 m, W → – 12.0 m 6.0 m, S → - 6.0 m
TOTA
+ 23.0 m + 14.0 m
L
We call this process of solving vectors as the COMPONENT METHOD.
6
GENERAL PHYSICS 1: MODULE 1
Based on the calculation on the table of components using the component method:
“Resultant” vector along x-axis (Rx) is + 23.0 m or 23.0 m, E
o Horizontal component
“Resultant” vector along y-axis (Ry) is + 14.0 m or 14.0 m, N
o Vertical component Learning Tip:
STEPS IN PROBLEM SOLVING
So, using the Pythagorean theorem in the resultant displacement: 1. Read and analyze the word problem.
2. List down all the given quantities.
3. Identify the unknown value or the asked
⃗
R 2 = Rx2 + Ry2 quantity in the problem.
4. Choose and use the correct formula for
⃗
R 2 = (23.0 m)2 + (14.0 m)2 the unknown or asked quantity.
⃗
R = √(23.0 m)2+(14.0 m)2 5. Calculate.
Then, use the trigonometric function tangent (tan) to get the direction of the resultant displacement:
opposite side R y
tan θ = =
adjacent side R x
+14.0 m opposite side of the angle θ
=
+ 23.0 m
tan θ = 0.6087
θ = tan-1 (0.6087)
= 31.30° express your answer for θ in degrees to denote direction
PRACTICE EXERCISES:
1. A boat moves with a velocity of 15.0 m/s, N in a river which flows with a velocity of 8.0 m/s, W.
Calculate the boat's resultant velocity respect to due north. (Answer: 17.0 m at 28.1° West of
North)
2. A plane moves with a velocity of 63.5 m/s at 32 degrees South of East. Calculate the plane's
horizontal and vertical velocity components. (Answer: Rx = 53.85 m/s, E; Ry = 33.64 m/s, S)
3. A storm system moves 5000 km due east, then shifts course at 40 degrees North of East for 1500
km. Calculate the storm's resultant displacement. (Answer: 6224.14 km @ 8.91 degrees, North of
East)
7
GENERAL PHYSICS 1: MODULE 1
Assessment #1
MEASUREMENTS AND VECTORS
Name Date
Section Score
PART I. TRUE OR FALSE: Write TRUE if the statement is correct and FALSE if otherwise.
1. The International System of Units is called the metric system because units of
different size are related by powers of 10.
2. The SI base unit for mass is the gram (g).
3. Derived units are units that are expressed using combinations of the fundamental
units.
4. Speed is a derived unit, measured in meters per second.
5. A nanometer means 1.0 x 109 meters.
6. Accuracy is how close a measured value is to the actual value while precision is how
close the measured values are to each other.
7. Random errors usually result from the experimenter’s inability to take the same
measurement in exactly the same way to get exact the same number
8. Mistakes made in the calculations or in reading the instrument are considered in
error analysis.
9. A vector is any quantity in physics that has both magnitude and direction.
10. A scalar quantity is any quantity in physics that has magnitude, but not a direction
associated with it.
PART II. CONVERSION OF UNITS: Convert the following units onto the units given. Express your answers
in scientific notation (limit to 2 decimal places only) and show your solution on the space provided for.
4. 24 hs to ns 9. 60 km/h to m/s
8
GENERAL PHYSICS 1: MODULE 1
PART III. PROBLEM SOLVING. Solve for what is asked in the word problems. Show your complete solution
on the space provided for.
1. Mr. Right walks 130 meters West, then another 50 meters east. What is his displacement relative to
where he started?
2. A car moves with a velocity of 60 km/h at 45 degrees North of East. Calculate the car's horizontal and
vertical velocity components.
3. A man, searching for the love of his life, wanders 85.0 meters, East then 13.0 meters, South.
Frustrated, he wanders another 90.0 meters, West then 50.0 meters, South. Calculate the man's
displacement.
4. A storm system moves 7 000 km due west, then shifts course at 75 degrees East of North for 1 200 km.
Calculate the storm's resultant displacement.