Professional Documents
Culture Documents
Instruction Manual Sensor Autonics BUP Series
Instruction Manual Sensor Autonics BUP Series
Failure to follow this instruction may result in electric shock or fire. (White)Control
④Installation category III
3. Do not use the unit in the place where flammable/explosive/corrosive gas,
humidity, direct sunlight, radiant heat, vibration, impact, or salinity may be present.
6
Control output No mark NPN open collector output (Brown)+V Door side sensors
9
Main circuit
30 30mm 78.5 open Output short Max. 200mA ±10% Connector/Sockets
Sensing distance -
50 collector overcurrent Temperature controllers
50 50mm protection
output 1.5Ω Temperature/Humidity transducers
Item Optical axis circuit
BUP Photoelectric sensor (Blue)0V Dark ON SSR/Power controllers
Sensitivity VR Counters
(White)Control
Operation Mode Operation Timers
41.6
indicator
Panel meters
78.1
open 12-24VDC
6
TEL: 82-51-519-3232
Laser welding/Cutting system
※Be sure to follow cautions written in the instruction manual and the technical 32 ※If short-circuit the control output terminal or supply current over the rated specification, E-mail: sales@autonics.com
2-M8 Bolt
descriptions (catalog, homepage). normal control signal is not output due to the output short over current protection circuit. DRW171453AA