Professional Documents
Culture Documents
Professional Qualification
Year: 2005.
University: University HADJ LAKHDAR Electronic Department of BATNA.
Diploma: BAC + 5, Cycle Engineer Electronics, Option industrial Control.
Year: 2014.
University: University HADJ LAKHDAR Electronic Department of BATNA.
Diploma: BAC + 7, Cycle Magister Microelectronics, Option Integrated Circuit Design.
Professional Experience
Company Foraid Algerie For SPIE Oil and Gas Services.
From September 2013
To February 2014
Position Commissioning Instrument Supervisor.
JGC Gassi Touil Gas Processing Facilities Project in Algeria
The commissioning activities I have been charged with were covering the following scope:
Provide the support during the Start-up activities with the final preparation to the introduction
of the feedstock into the CPF plant.
Loop checking for each standalone instrument and control loop
Calibration of alarms and providing preliminary set points
Calibration and functionality checks for all trip settings,
Functionality checks for the fire and gas system,
Functionality checks for all instruments in each control loop,
Functionality checks for all interlocking systems,
Functionality checks for emergency shutdown systems.
Company Invensys System Algeria.
From April 2013
To August 2013
Position Project Application Engineer.
SYNGENTA Project (Monthey Switzerland)
Industry sector: Refining
Member of Syngenta Project team working on remote in Algiers which their responsibilities as follow:
- Displays animation and graphics configuration
- Scripts creation
- Test and validation of the displays
- Test and validation of the overlays.
- SFC sequences development
Training on the Eurotherm Programmable controller
Installation and troubleshooting of the system platform FCS 4.0 including IASeries 8.8 and InFusion
10.5
Building Process Displays with Wonderware InTouch WindowMaker
Configuring Process Displays With Wonderware InTouch WindowMaker
Raised technical queries on modifications for graphics and programs on SFC
Company SARPI Spa
From September 2012
To April 2013
Perform inspections and tests as required by the discipline all Electrical & Instrumentation
installation activities at site
Prepare inspection/test reports and maintain the QA/QC files related to assignment
Assist with tracking and logging Non-Conformance Reports, Quality/Productivity
Improvement Reports.
Implementation of quality plan for this project, which include inspection, testing and proper
documentation
Ensure that all works complied with client/contractor issued (IFC) drawing, applicable
standards and specification.
Installation, wiring and cable laying, termination, witnessing of insulation resistance test and
hipot test.
Ensure that all related inspection and testing activities with regards to Environment, Health &
Safety procedures and maintenance rules are respected.
Monitor the work performance to ensure the respect of work standards and project
specifications.
Coordinate and assist construction to resolve any encountered problems related to inspection
and testing activities
Initiate remedial or corrective action based on standard, code, and specification and verify the
closure of NCR.
Inspect and witness the construction works as per their approved Inspection Test Plan.
Ensure the effective coordination with the client related to inspection, testing activities and
documentation.
Maintain all Quality Control Report.
Control and monitoring of material flow to site, Controlling of drawing as per contract and
client requirement.
Company SARPI Spa
From September 2012
To April 2013