Professional Documents
Culture Documents
Options:
Controls / Interlocks
• PLC controller
• RS232 and RS485 communication
• Ethernet ready controller
• Remote start/stop
• Audible alarm with silence
• Visual alarm beacon
• Remote control
• Fluid monitoring and control devices
Electrical
• 24V control systems
• Phase monitor
Features:: • Power cord extension
• CE compliance
• 1.0 to 10 Tons (3 to 35 kW) of cooling capacity with a remote • NRTL certifications
condenser
• Opti Temp patented advanced refrigeration control circuitry Mechanical
(ARC) standard • Specialty wetted construction materials
• Micro-processor based PID auto tuning controller with digital • Multiple pump upgrades
display • Anti-drain back prevention
• Programmable high temp or high/low temp alarm • Particle filters
• Temp output in °C or °F • UV filters
• Dual frequency compatible • Immersion heaters
• Operating temperature ranges up to 90 C • Remote temp sensing
• Non-ferrous wetted construction standard • Fluid circuit insulation
• Rugged powder coated steel cabinetry • Manifolds
• Stainless steel MNPT process connections • Drain kits
• Swivel casters standard • Extended warranty
• Removable cover and side access panels
• NEMA 1 electrical enclosure standard Other
• S.S. brazed plate evaporator • Fluid conductivity control systems
• Power cord provided • Automatic fluid pH control systems
• One year limited warranty • OPTISHIELD® corrosion inhibitors
Contact Information:
Opti Temp Inc.
1500 International Dr.
Traverse City, MI 49686
Please contact our sales & applications
P: 231-946-2931
F: 231-946-0128 department for a more complete list of
E: information@optitemp.com available options.
Doc. # D003296AC
REFRIGERATED RE-CIRCULATING FLUID CHILLERS
Specifications(1)
(1) As a result of continuous improvement efforts, specifications are subject to change without notice or liability. (2) Pump pressures at pump discharge. (3) Capacity
based on 55 °F LWT and 95 °F ambient air temperature. Capacities may be ± 5% as reserved by compressor manufacturer. (4) Full load amps for models with
standard pumps. Consult applications engineering for models with optional pumps. Full load amps must be used for sizing disconnects and supply wiring. Contact
factory for 50 Hz applications engineering. (5) Dimensions are approximate and include castors but do not include filters. (6) Cooling stability only. Optional heating
stability: ± 2.0°F.
Doc. # D003296AC
REFRIGERATED RE-CIRCULATING FLUID CHILLERS
Pump Curves:
Flow (LP M )
0 5 10 15 20
100
90
6
80 P3&4
P1 &2
60 Hz 5
70 60 Hz
60 P5&6
4
P ressure 60 Hz P ressure
(P SI)
50 (BAR)
3
40 P1 &2 P3&4 P5&6
30 50 Hz 50 Hz 50 Hz 2
20
1
10
0 0
0 1 2 3 4 5 6
Flow (GP M )
Centrifugal Pump(s)
Flow (LPM)
0 50 100 150 200
80
5
70
60 4
50
Pressure 3 Pressure
40 C4 60 Hz
(PSI) (bar)
C4 50 Hz
30 2
C3 60 Hz
20 C3 50 Hz C2 60 Hz
C2 50 Hz 1
10
0 0
0 10 20 30 40 50 60
Flow (GPM)
Doc. # D003296AC