The document discusses the qualification of UV/Vis spectrophotometers by testing for stray light. It defines stray light as light detected outside the selected wavelength bandwidth, which can interfere with absorbance measurements. Higher stray light levels can lead to lower reported absorbance values. Acceptable stray light levels and methods for testing stray light are described, including using solutions of KCl, NaI, or NaNO2 to evaluate its presence and effects.
The document discusses the qualification of UV/Vis spectrophotometers by testing for stray light. It defines stray light as light detected outside the selected wavelength bandwidth, which can interfere with absorbance measurements. Higher stray light levels can lead to lower reported absorbance values. Acceptable stray light levels and methods for testing stray light are described, including using solutions of KCl, NaI, or NaNO2 to evaluate its presence and effects.
The document discusses the qualification of UV/Vis spectrophotometers by testing for stray light. It defines stray light as light detected outside the selected wavelength bandwidth, which can interfere with absorbance measurements. Higher stray light levels can lead to lower reported absorbance values. Acceptable stray light levels and methods for testing stray light are described, including using solutions of KCl, NaI, or NaNO2 to evaluate its presence and effects.
Analytical Quality Control (PCC 402 / PC 511 / PHR 525) Tutorial 8 Qualification of UV/Vis spectrophotometers
Limit of stray light
1) Give the specific expression for a. The portion of light passing through solution which is not part of the normal λ . b. The detected light outside the bandwidth of the selected λ. 2) How many types of stray light can interfere in measuring absorbance. Which type would seriously affect the magnitude of absorbance? Give an expression to relate absorbance to stray light 3) Give an expression to relate absorbance to stray light at high concentration
4) Assuming constant transmittance at 1% of the incident light
Calculate absorbance at 0 % stray light & at 1.0 % stray light of the intensity of the incident light. Compare and comment 5) a. At constant transmittance, the higher the stray light i. The lower the absorbance ii. The higher the absorbance iii. The higher the transmittance iv. No correlation b. The preferred range of measuring absorbance is i. 0.1 – 1.3 ii. 0.3 – 1.0 iii. 0.0 – 1.0 iv. None of these c. Stray light can be tested by a solution of i. KCl ii. NaI iii. NaNO2 iv. All of these 6) How can you test for the presence of stray light?