Professional Documents
Culture Documents
& Rectify
↓
Set Embroidery Machine
↓
Embroidery Operation
↓
Embroidery Quality Check
↓
Embroided as Per Specifications?
↓
Yes→ No→ Re-cut similar leftover fabrics→ Redo embroidery
↓
Body Panels Send for Fusing
↓
Send Embroidery parts for Sewing
Set Embroidery m/c
1. Program/SPI
2. Needle
3. Thread
4. Pattern
5. Interlining
Embroidery Machine
.
Set embroidery machine:
If all specification match Set embroidery machine, If not match check with merchandising and rectify. Setting an
embroidery machine for performing embroidery operation
Embroidery Operation:
In this step, the embroidery operation started in a little amount. Quality must be ensured as per buying house
approval if the panel should recut and do embroidery again.
Embroidery QC:
In this step, The QC checked the embroidery. They match the produced product with the specimen. If okay go for
body panel sewing. If not okay Recut similar leftover fabrics and prepared for further embroidery.
Approved By
Managing Director