Professional Documents
Culture Documents
uk
FJ/FJH 6000 B
Bronze body to EN CC491K, equivalent
Ø 142
Ø 150
FULL JET
150 x 150 square flange with
“O” ring seal
INLET Ø 31/2" BSP F.
Hydraulic connections
Ø148
1/8” BSP F inlet and outlet
Operating pressure
Design pressure 16 bar
1/8" BSP F (OIL)
Factory test pressure 24 bar
K factor
2270 (Flow l/min = K x √Pressure bar)
Weights and dimensions Optional paint finish
FJ/FJH 6000 B with 150 x 150 flange
Surface preparation Solvent cleaning
connection 11.5 kg
Primer coat Epoxy 30µm
FJ/FJH 6000 SS with 31/2” BSP F
connection 15.0 kg Intermediate coat Epoxy grey 40µm
Finish coat Polyurethane 40µm Red RAL3000
Total dry film thickness 110µm
THROW (m)
40 70
THROW (m)
20
30 60
10
20 50
3 4 5 6 7 8 9 3 4 5 6 7 8 9 3 4 5 6 7 8 9
PRESSURE (bar) PRESSURE (bar) PRESSURE (bar)
8
Remote control operation 75%
The FJH 6000 nozzle is available with a CROSS REFERENCE IN % BETWEEN JET HEIGHT AND LENGTH
HEIGHT OF JET IN %
available this can be used to move the
9
nozzle. Where electric remote control
∝
sited in the hydraulic circuit allows fluid 4000 Spread of fog spray
to re-circulate when in manual mode. 3000 5 bar 7 bar 9 bar
Throw of nozzle jet 2 3 4 5 6 7
30° fog jet 2.5m 2.5m 2.5m
OPERATING PRESSURE (bar)
Maximum water throw 92m* at an 60° fog jet 3.0m 3.0m 3.0m
angle of 32º
Note: The jet throw depends on a
375
number of variables such as wind
direction, type and concentration of
foam in the water and the condition 250
of the monitor water ways and nozzle.
200
REACTION (kg)
The Angus monitor range includes bronze models up to 8,500 l/min and stainless steel models up to 30,000 l/min.
Most models are available with lever or gearbox control, automatic oscillation or with hydraulic or electric remote control.
All are suitable for use where explosive atmospheres may be present.
Angus is a company assessed to ISO 9001:2000
© Angus Fire. Angus Fire reserves the right to modify any specification without prior notice. ref: 6452/06/07 page: 2 of 2