Scribd Logo
Upload

Welcome to Scribd!

  • Reverse Detection ECU: Technical Instructions

    Uploaded by

    Dima
    8 views2 pages
    This document provides technical instructions for a reverse detection ECU from Haldex. It comes pre-configured to enable auxiliary outputs 2 and 3 when the vehicle moves in reverse over 0.15 MPH for over 0.5 seconds. Auxiliary input 4 is dedicated for the reverse sensor. The ECU is compatible with various trailer ABS configurations that use different numbers of speed sensors and valve channels. Backup lamp and alarm kits are also available that include the necessary components like the reverse sensor and wiring.

    Original Description:

    Original Title

    l31310

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document provides technical instructions for a reverse detection ECU from Haldex. It comes pre-configured to enable auxiliary outputs 2 and 3 when the vehicle moves in reverse over 0.15 MPH for over 0.5 seconds. Auxiliary input 4 is dedicated for the reverse sensor. The ECU is compatible with various trailer ABS configurations that use different numbers of speed sensors and valve channels. Backup lamp and alarm kits are also available that include the necessary components like the reverse sensor and wiring.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    8 views2 pages

    Reverse Detection ECU: Technical Instructions

    Uploaded by

    Dima
    This document provides technical instructions for a reverse detection ECU from Haldex. It comes pre-configured to enable auxiliary outputs 2 and 3 when the vehicle moves in reverse over 0.15 MPH for over 0.5 seconds. Auxiliary input 4 is dedicated for the reverse sensor. The ECU is compatible with various trailer ABS configurations that use different numbers of speed sensors and valve channels. Backup lamp and alarm kits are also available that include the necessary components like the reverse sensor and wiring.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    of 2

    Reverse Detection ECU haldex.

    com

    Technical Instructions

    Important information
    This ECU comes Pre-configured for Reverse Detection Auxiliary outputs 2 & 3 are turned off after the vehicle
    and enables auxiliary outputs 2 & 3 when moving stops moving or when moving in the forward direction.
    in reverse > .15 MPH for > 0.5 seconds.
    Auxiliary input 4 is dedicated for the reverse sensor,
    Note: A standard ITCM ECU will not work see L31312 (left or roadside mounting is required).
    with a reverse application. Specify the ITCM The Reverse Sensor is compatible with all the trailer
    Reverse Detection ECU. ABS configurations listed below.

    Trailer ABS Configurations


    ABS Configuration​ ITCM Speed Sensors /
    Auxiliary
    Connections Valve channels​​​

    2S/1M​​​ Reverse Sensor S1A, S1B / 21 Solenoid ​​​​​A4 – Reverse

    2S/2M​​​ (Relay option) S2A, S2B / 21 & 22 Solenoids A3 – Reverse Output

    4S/2M​​​ (Relay option) S1A, S1B, S2A, S2B / 21 & 22 Solenoids​​​ A2 – Reverse Output

    4S/3M​​​ S1A, S1B, S2A, S2B / 21, 22 & 23 Solenoids


    See L31286 for ITCM Installation / service manual.
    Reverse Detection ECU
    Technical Instructions

    AL919356 comes pre-configured


    with the following auxiliary settings:
    Pre-Configured
    Auxiliary outputs 2 & 3 (A2 & A3) are dedicated to backup AUX 4 Settings
    lamps or a backup alarm.

    Auxiliary input 4 (A4) is dedicated for the reverse sensor


    (left or road-side mounting is required).

    Backup lamp and alarm kits available:


    Includes the Reverse Sensor for Drum Brakes, relay assembly, Auxiliary cable
    AQ25002
    and pre-configured ITCM ECU.

    AQ25003 Includes the Reverse Sensor for Drum Brakes, relay assembly and Auxiliary cable.

    Includes the Reverse Sensor for Disc Brakes, relay assembly, Auxiliary cable
    AQ25004
    and pre-configured ITCM ECU.

    AQ25005 Includes the Reverse Sensor for Disc Brakes, relay assembly, Auxiliary cable.

    To learn more, contact your Haldex sales professional.


    United States 816-891-2470 For additional contact information L31310
    Canada 519-621-6722 or to learn more about Haldex, R6/21 P6/21 5C ALP
    Mexico 52-81-81569500 please visit haldex.com Printed In The USA

    You might also like