Professional Documents
Culture Documents
Question Bank
1. A system which allows energy transfer but does not allow mass transfer is called
Open system
Closed system
Isolated system
2. The unit of temperature in S.I. units is
Centigrade
Celsius
Fahrenheit
Kelvin
3. The unit of energy in S.I. units is
Watt
Joule
joule/s
joule/m
4. Which of the following relations is true, for coefficient of performance (C.O.P)?
(C.O.P)heat pump – (C.O.P)refrigerator = 1
(C.O.P)heat pump – (C.O.P)refrigerator > 1
(C.O.P)heat pump – (C.O.P)refrigerator < 1
(C.O.P)heat pump – ( C.O.P)refrigerator = 0
5. According to Kelvin-Planck statement, it is impossible to construct a device
operating on a cycle which transfers heat from ____
low pressure heat reservoir to high pressure reservoir
low temperature heat reservoir to high temperature reservoir
high pressure heat reservoir to low pressure reservoir
high pressure heat reservoir to low pressure reservoir
9. 24. During a thermodynamic cycle of process (A-B-C-D-A), the heat transferred during each process
are: 120 KJ, -16KJ, -48KJ & 12 KJ resp. Find net work transferred during thermodynamic cycle
55 kj
25 kj
68kj
86kj
10. 25. Which statement is the best example of heat energy transfer by conduction?
Radiation
Advection
Conduction
Convection
14. Which of the following is not used in four stroke compression-ignition (CI)
engines?
90°
180°
270°
360°
16. In four stroke engine there is one power stroke in _____ of crankshaft rotation.
720°
360°
180°
540°
17. In four stroke engine which of the following is also known as power stroke
Suction stroke
Compression stroke
Expansion stroke
Exhaust stroke
water passes through the tubes which are surrounded by hot gases
hot gas passes through the tubes which are surrounded by water
forced circulation takes place
none of these